MOES автоматтык түрдө өз колуңуз менен жасалган акылдуу моторлуу чынжырлуу ролик жалюзилери үчүн мотордун көрсөтмөсү

Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your MOES Automatic DIY Smart Motorized Chain Roller Blinds Drive Motor. Please read this manual thoroughly before use to ensure proper function and safety.

Продукт өзгөчөлүктөрү:

• Акылдуу үйдү автоматташтыруу: Automate existing blinds, shades, and curtains. The motor allows setting upper and bottom limit positions, which are saved even after power loss. Motor speed is adjustable via the app.
• Жөнөкөй DIY орнотуу: Designed for easy installation in minutes. Compatible with any looped plastic beaded chain or metal beaded chain.
• Смартфон колдонмосун башкаруу: Control your smart blinds directly using the smartphone app or the intuitive touch strip controls on the device.
• Custom Schedules & Accurate Timer Setting: Set independent schedules and timers for your blinds. Features include light sense automatic identification, single control, group control, and slow start/stop. Customize schedules for different days, weeks, or months. Up to 6 different scenes can be added.
• Бир нече шайкештик: Works with a variety of shades, blinds, curtains, and drapes.

Note: Bluetooth must be enabled on your device before using the App.

Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

• Moes Smart Blinds Drive Motor (x1)
• Кубат адаптери (x1)
• Монтаждык бурамалар (x2)
• Gears (x3)
• 3M VHB Adhesive Tape (x1)

Техникалык шарттар

Орнотуу жана орнотуу

The MOES Smart Blinds Drive Motor is designed for quick and easy DIY installation. Follow these steps to install your motor:

1. Монтаждоо бетин даярдаңыз: Choose a clean, flat surface near your window blinds for mounting the motor. Ensure it's within reach of a power outlet for charging.
2. Монтаждык кронштейнди тиркөө: Use the provided screws or 3M VHB adhesive tape to securely attach the mounting bracket to the wall.
3. Мотор орнотуу: Slide the Smart Blinds Drive Motor onto the mounted bracket until it clicks into place.
4. Select Appropriate Gear: Choose one of the three provided gears that best fits your blind's chain or cord.
   • Ball Chain: 3mm-9mm diameter
   • Nylon Cord: 0.3mm-4mm diameter
5. Attach the Chain/Cord: Carefully feed your blind's looped chain or cord into the selected gear on the motor. Ensure the chain/cord is properly seated and tensioned.
6. Туташуу кубаты: Plug the provided power adapter into the motor and a power outlet to charge the internal battery.

Операция

Кол менен башкаруу:

The motor features intuitive touch strip controls for basic operation. Simply press the UP or DOWN button on the motor itself to raise or lower your blinds. This is useful for quick adjustments or for users who prefer not to use the app.

Смартфон колдонмосун башкаруу:

For advanced features and remote control, use the dedicated smartphone application. Ensure Bluetooth is enabled on your smartphone before attempting to connect.

1. Колдонмону жүктөп алыңыз: Издөө the "MOES" app (or specified app in product documentation) on your smartphone's app store and install it.
2. Түзмөктү жупташтыруу: Open the app and follow the on-screen instructions to pair your Smart Blinds Drive Motor via Bluetooth.
3. Set Upper & Lower Limits: Use the app to define the desired upper and lower stopping positions for your blinds. These limits will be saved even if the device loses power.
4. Adjust Motor Speed: The app allows you to adjust the operating speed of the motor to your preference.
5. Create Schedules & Timers:
   • Set specific times for your blinds to open or close automatically.
   • Utilize the light sense automatic identification feature for smart control.
   • Configure single control, group control (for multiple motors), slow start, and slow stop functions.
   • Set custom schedules for different days, weeks, or months.
6. Configure Scenes: The app supports up to 6 different scenes, allowing you to customize multiple actions with a single command.

Техникалык тейлөө

Батареяны заряддоо:

The motor is equipped with a rechargeable battery (7.4VDC/1000mAh) designed for continuous operation over a long period. When the battery level is low, connect the provided DC 8.4V charger to the motor and a power outlet. Ensure the motor is fully charged for optimal performance.

Тазалоо:

Wipe the exterior of the motor with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the device.

Chain/Cord Inspection:

Periodically inspect the blind's chain or cord for any signs of wear, fraying, or damage. Replace damaged chains/cords to ensure smooth operation and prevent motor strain.

Проблемаларды чечүү

If you encounter issues with your MOES Smart Blinds Drive Motor, refer to the following common questions and answers:

Q: Can multiple family members control the blinds using their own phones?

A: One app can control several blinds, but a single blind cannot be controlled by multiple phones simultaneously.

Q: Is the motor compatible with Google Home or Amazon Alexa?

A: No, this motor does not currently support integration with Google Home or Amazon Alexa.

Q: Is an internet connection required for the motor to function?

A: No, the motor operates via Bluetooth. A Bluetooth connection is essential for device pairing and app control, but a wireless internet connection is not required.

Q: If I have multiple MOES motors, can I control them all with one app?

A: Yes, the app can manage a maximum of 7 devices.

Q: Can this motor be used with cellular, honeycomb, or vertical blinds that have a looped cord?

A: Yes, this motor is compatible with any looped plastic beaded chain or metal beaded chain, which includes many cellular, honeycomb, and vertical blind types.

Колдонуучу сунуштар

• Always ensure Bluetooth is active on your smartphone before attempting to connect or control the motor via the app.
• Алдын алаtage of the app's scheduling features to automate your blinds for energy saving and convenience.
• Experiment with the motor speed adjustment in the app to find the optimal movement for your blinds.
• For elderly users or those who prefer simplicity, the manual UP/DOWN buttons on the motor provide direct control without needing the app.
• Remember that upper and bottom limit positions are saved even after power loss, so you only need to set them once.

Кепилдик жана колдоо

For warranty information, please refer to the purchase documentation or contact the seller directly. For technical support, please reach out to MoesHouse Direct Store.