1. Киришүү
Сатып алганыңыз үчүн рахматasing the BTMETER BT-8806 Handheld Wind Cup Anemometer. This device is designed for accurate measurement of wind speed and temperature. For best possible performance and safe operation, please read these operating instructions carefully before use and keep them for future reference.
The BT-8806 features a wind cup design for reliable wind speed measurement, temperature sensing, a clear LCD with backlight, data hold, and Max/Min selection. It is suitable for various applications including ventilation systems, wind power assessment, nautical surveys, and offshore operations.
Image 1: BTMETER BT-8806 Anemometer in use, showing wind speed (0.7 ~ 42 M/S) and temperature (-10°C ~ 45°C) measurements with an accuracy of ±2°C (±3.6°F).
2. Коопсуздук маалыматы
- This device serves exclusively for wind speed and temperature measurement.
- Check this device for possible damage before each use. If it shows visible damages, it must not be used.
- Consult your dealer for necessary repairs.
- Never use this device close to flammable gases, fumes, or dust.
- Do not try to disassemble the device.
- Do not clean this device by using solvents.
- Avoid sudden change of temperature. Cup condensation inside the unit will affect accuracy.
- Аппаратты сууга салбаңыз.
- Do not put the device under extreme heat or cold.
3. Пакеттин мазмуну
Пакетти ачкандан кийин, бардык буюмдар бар экенин жана жакшы абалда экендигин текшериңиз:
- 1 x BTMETER BT-8806 Handheld Wind Cup Anemometer
- 1 x Ташуу кутусу
- 1 x User Manual
Эскертүү: 2 x 1.5V AAA batteries are required for operation and are not included in the package.
Video 1: Product demonstration, including unboxing, button descriptions, and wind tunnel testing of the anemometer.
4. Продукт бүтүп калдыview
The BTMETER BT-8806 is equipped with a wind cup sensor for accurate wind speed readings and a temperature sensor. Its ergonomic design ensures comfortable handling.
Сүрөт 2: Алдыңкы view of the BTMETER BT-8806 Anemometer, highlighting its compact design.
4.1. Негизги өзгөчөлүктөрү
- Компас: Integrated for directional reference.
- LCD дисплей: Clear digital readout for measurements.
- Арткы жарык: Жарык аз шарттарда көрүнүү үчүн.
- Дайындарды кармоо: Дисплейдеги учурдагы окууну токтотот.
- Max/Min Select: Displays maximum or minimum recorded values.
- Автоматтык түрдө өчүрүү: Батареяны үнөмдөө үчүн 15 мүнөт аракетсиз тургандан кийин автоматтык түрдө өчөт.
- Температураны өзгөртүү: Switch between Centigrade (°C) and Fahrenheit (°F).
- Wind Speed Unit Switching: Selectable units including M/S, KM/H, MPH, KTS.
- Tripod жип: UNC 6.35 x 1.27 for mounting (max screw length 5.5mm).
Сүрөт 3: Бүттүview of special functions and dimensions (162mm height, 74mm width) of the anemometer.
4.2. Button Description and On-Screen Display
Сүрөт 4: Детальдуу view of the anemometer's buttons and on-screen display elements.
- On / Off Key (Power Icon): Press to turn the device on or off. Features a 15-minute auto shutdown.
- Backlight Key (Snowflake Icon): Press to activate/deactivate the display backlight.
- HOLD баскычы: Press to hold the current data reading. The 'HD' symbol will appear on the screen.
- МАКС/МИН баскычы: Press to cycle through Maximum, Minimum, and Average wind speed readings. Also functions as Centigrade/Fahrenheit switch key when pressed with UNIT key.
- UNIT Key: Press to switch between wind speed units (M/S, KM/H, MPH, KTS). Also functions as Centigrade/Fahrenheit switch key when pressed with MAX/MIN key.
On-Screen Display Elements:
- Current wind force
- Maximum wind force
- Average wind force
- Beaufort scale graph
- Selected wind speed unit (m/s, km/h, mph, knots)
- Temperature reading (°C or °F)
5. Орнотуу
5.1. Батареяны орнотуу
- Аппараттын артындагы батарея бөлүкчөсүн табыңыз.
- Батареянын эшигин ачыңыз.
- Insert two (2) 1.5V AAA batteries, ensuring correct polarity (+/-).
- Батарейканын эшигин бекем жабыңыз.
Аппарат азыр колдонууга даяр.
6. Операция
6.1. Негизги өлчөө
- Press the On/Off key to turn on the anemometer.
- Select your desired wind speed unit by pressing the UNIT key. Available units are M/S, KM/H, MPH, and KTS.
- Hold the tester vertically upward, without considering the wind direction, in the area where wind speed is to be measured. The display will show the current wind speed.
6.2. Маалыматты кармоо функциясы
- While taking a measurement, press the HOLD key to freeze the current reading on the display. The 'HD' symbol will appear.
- Press the HOLD key again to release the data hold and resume live measurement.
6.3. Max/Min/Average Measurement
- To measure the maximum, minimum, and average values over a period, first fix the anemometer at the measurement location.
- Press the On/Off key to start measurement.
- After the measurement period, press the HOLD key to lock the measured value. The 'HD' symbol will appear.
- Press the MAX/MIN key to cycle through the maximum (MAX), minimum (MIN), and average (AVG) wind speed values recorded during the measurement period.
6.4. Температура бирдигин которуу
To switch between Centigrade (°C) and Fahrenheit (°F), press the MAX/MIN key and the UNIT key simultaneously.
6.5. Арткы жарыкты башкаруу
Press the Backlight key (snowflake icon) to turn the display backlight on or off.
6.6. Автоматтык түрдө өчүрүү
The device will automatically power off after approximately 15 minutes of inactivity to conserve battery life.
Image 5: The anemometer features an energy-saving auto shutdown after 15 minutes of non-operation.
6.7. Wind Level Display (Beaufort Scale)
The device provides a clear visual representation of wind levels based on the Beaufort scale, with corresponding wind speeds in MPH.
Image 6: Clear Wind Level Display showing Beaufort scale from 1 (Light air, 1-3 mph) to 12 (Hurricane-force, ≥73 mph).
7. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Type | Анемометр |
| Модель номери | BT-8806 |
| Бренд аты | BTMETER |
| Measuring Range (Wind Speed) | 0.7-42 M/S |
| Resolution (Wind Speed) | 0.1 (0-19.9), 1 (20-150) |
| Accuracy (Wind Speed) | ± 4%, ± 1 Digit |
| Температураны өлчөө диапазону | -10 ℃ - 45 ℃ |
| Авто өчүрүү | Болжол менен 15 мүнөт |
| Батарея түрү | 2 x 1.5V AAA batteries (Not Included) |
| Өзгөчөлүктөрү | LCD, Backlight Display, Compass, Centigrade/Fahrenheit switch key, Data Hold, Max/Min Select, Wind Cup Compass |
| Origin | Материк Кытай |
| Сертификация | Жок |
| Жогорку коркунучтуу химиялык | Жок |
8. Техникалык тейлөө
- Тазалоо: Аппаратты тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Сактагыч: Түзмөктү көпкө чейин колдонбосоңуз, агып кетпеши үчүн батареяларды алып салыңыз. Түзмөктү салкын, кургак жерде, күн нуру түз тийбеген жана өтө жогорку температурадан алыс сактаңыз.
- Батареяны алмаштыруу: Так көрсөткүчтөрдү камсыз кылуу үчүн дисплейде батареянын заряды аз деген индикатор пайда болгондо, батареяларды алмаштырыңыз.
9. Кыйынчылыктарды
- Түзмөк күйбөйт: Батареялар туура орнотулганын жана заряды жетиштүү экендигин текшериңиз. Зарыл болсо, батарейкаларды алмаштырыңыз.
- Туура эмес окуулар: Ensure the wind cup is free from obstructions and rotates smoothly. Avoid sudden temperature changes that could cause condensation.
- Дисплей көйгөйлөрү: If the display is dim, replace the batteries. If the display is erratic, try turning the device off and on again.
If you encounter any issues not listed here, please contact customer support.
10. Колдонуучунун кеңештери
- For optimal wind speed measurement, ensure the anemometer is held in an open area, free from obstacles that could disrupt airflow.
- When using the data hold function, remember to press the button again to resume live readings.
- The auto-shutdown feature is great for battery saving, but be mindful if you need continuous monitoring for longer periods.
11. Кепилдик жана колдоо
This product is covered by a standard manufacturer's warranty. For detailed warranty information or technical support, please refer to the documentation provided with your purchase or contact the BTMETER Official Store directly.
