TrustFire UC10 магниттик батарея кубаттагычынын колдонуучу колдонмосу

1. Киришүү

The TrustFire UC10 is a compact, lightweight, and efficient magnetic charging and discharging integrated charger designed for various Li-ion batteries. It features a power bank function, allowing you to charge other electronic devices in emergencies. This manual provides detailed instructions for safe and effective use of your UC10 charger.

2. Коопсуздук маалыматы

• Always ensure correct battery polarity (+ to + and - to -) when connecting the battery to the charger. Incorrect connection will cause the red indicator light to flash, signaling a fault.
• Remove the battery promptly after charging is complete to prevent slight power consumption by the indicator.
• Кайра заряддалбаган батарейкаларды заряддоого аракет кылбаңыз.
• Avoid short-circuiting the magnetic contacts.
• Keep the charger away from water and extreme temperatures.
• Заряддоочу түзүлүштү ажыратпаңыз же өзгөртпөңүз.
• Use only compatible Li-ion batteries with voltag3.6Вдан 4.2Вга чейин.

3. Пакеттин мазмуну

• 1 x TrustFire UC10 Battery Charger
• 1 x User Manual

4. Продукт бүтүп калдыview

The TrustFire UC10 features a USB-A plug for power input/output and two magnetic contacts for connecting to batteries. An LED indicator provides status feedback.

5. Техникалык шарттар

6. Орнотуу жана иштетүү

6.1. Батареяларды заряддоо

1. Кубат Булагына туташуу: Plug the USB-A end of the UC10 charger into a compatible 5V/1A USB power source, such as a mobile power supply, car charger, or laptop computer.
2. Батареяны тиркөө: Carefully attach the magnetic contacts to your Li-ion battery. Ensure the positive (+) contact aligns with the battery's positive terminal and the negative (-) contact aligns with the battery's negative terminal. The magnetic contacts are designed for easy and secure attachment.
3. Монитор көрсөткүчү: The LED indicator on the charger will show the charging status (see Section 7 for details).
4. Батареяны алып салуу: Once the battery is fully charged (Green Light), disconnect the battery from the charger and unplug the charger from the power source.

6.2. Discharging (Power Bank Function)

The UC10 can act as a power bank to charge other electronic devices using a charged Li-ion battery.

1. Батареяны туташтыруу: Ensure a charged Li-ion battery is correctly connected to the magnetic contacts of the UC10 charger.
2. Тышкы түзмөктү туташтыруу: Plug your electronic device (e.g., smartphone) into the USB-A output port of the UC10 charger using its charging cable.
3. Монитор көрсөткүчү: The LED indicator will show the discharge status (see Section 7 for details).
4. Ажыратуу: Once your device is sufficiently charged or the battery in the UC10 is depleted, disconnect the device and the battery.

6.3. Продукцияны көрсөтүүчү видео

7. Power Indicator Guide

7.1. During Charging

• Кызыл жарык: Кубатталууда.
• Жашыл жарык: Батарея толук заряддалган.
• Red Flashing (1Hz): Indicates battery reverse connection or a charger fault. Disconnect power and re-install the battery with correct polarity.

7.2. During Discharging (Power Bank Function)

• Жашыл жарык: Charging the connected electronic device.
• Кызыл жарык: Low battery (40% - 20% remaining capacity).
• Red Flashing (5Hz): Battery is running out (20% - 0% remaining capacity).

8. Коргоо өзгөчөлүктөрү

The TrustFire UC10 charger incorporates multiple safety features to ensure reliable and safe operation:

• Тескери туташуу коргоо: Prevents damage if the battery is connected with incorrect polarity. The indicator will flash red.
• Ашыкча кубаттан коргоо: Automatically stops charging when the battery reaches its maximum constant voltage of 4.2V.
• Кыска туташуулардан коргоо: Protects against short circuits between positive and negative terminals (generates a 90mA detection current).
• 0V активдештирүү функциясы: Can activate batteries with a protection plate that have been over-discharged to 0V.
• Температураны коргоо: Ашыкча ысып кетүүнүн алдын алуу үчүн ички температураны көзөмөлдөйт жана жөнгө салат.
• Ашыкча ток коргоо: Ашыкча ток агымынан коргойт.
• Over-Volt Protection: Protects against over-voltage шарттары.

9. Charging Time Table

The following table provides approximate charging times for various battery capacities. Note that actual charging times may vary based on battery condition, environment, and power source.

10. Техникалык тейлөө

• Keep the charger clean and dry. Wipe with a soft, dry cloth if necessary.
• Заряддоо түзүлүштү күн тийбеген жана экстремалдык температурадан алыс, салкын, кургак жерде сактаңыз.
• Заряддагычты кулап түшпөңүз же катуу таасирлерге дуушар болбоңуз.
• Ensure the magnetic contacts are free from debris to maintain good connection.

11. Кыйынчылыктарды

• Charger indicator flashes red (1Hz) during charging: This indicates incorrect battery polarity or a faulty battery. Disconnect the power, check the battery's positive and negative terminals, and re-connect correctly. If the issue persists, try a different battery.
• No indicator light when connected to power: Ensure the USB power source is active and providing 5V/1A. Check the USB connection for looseness.
• Батарея кубатталбай жатат: Verify the battery is a compatible Li-ion type (3.6V-4.2V). Ensure the magnetic contacts are clean and making good contact with the battery terminals.
• Power Bank функциясы иштебей жатат: Ensure the Li-ion battery connected to the UC10 is sufficiently charged. Check the connection to the external device.

12. Колдонуучунун кеңештери

• Always double-check the battery type and voltage before charging to ensure compatibility with the UC10 charger.
• For optimal charging and discharging performance, use high-quality Li-ion batteries within the specified voltage диапазону.

13. Кепилдик жана колдоо

The TrustFire UC10 Magnetic Battery Charger comes with a 3 жылдык кепилдик сатып алынган күндөн тартып.

For technical support, warranty claims, or any inquiries, please contact TrustFire customer service:

• Электрондук почта: sales@trustfire.com
• Tel/V/WhatsApp: +86 18129831271