1. Киришүү
The JBC CD-2BQF is a high-performance 220V soldering station designed for precision soldering tasks. It features advanced fourth-generation soldering technology, providing rapid heat-up and excellent thermal performance for various applications. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your soldering station.
2. Коопсуздук маалыматы
Электр тогуна урунууну, жаракат алууну же жабдуулардын бузулушун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Ensure the soldering station is connected to a properly grounded power outlet.
- Do not operate the station in wet or damp шарттар.
- Always use appropriate personal protective equipment (PPE), such as safety glasses, when soldering.
- Soldering irons reach very high temperatures. Avoid direct contact with the heating element or tip.
- Place the soldering iron in its stand when not in use to prevent accidental burns or damage.
- Түтүндөрдү таркатыш үчүн иш мейкиндигинде тийиштүү желдетүүнү камсыз кылыңыз.
- Тазалоодон же тейлөөдөн мурун электр менен жабдууну өчүрүңүз.
- Do not modify the equipment. Refer all servicing to qualified personnel.
3. Пакеттин мазмуну
The JBC CD-2BQF Soldering Station package typically includes the following components:
- JBC CD-2BQF Soldering Station unit
- JBC T245-A Soldering Iron Handle
- Soldering Iron Stand with integrated tip cleaner (brass wool)
- Кубат кабели (220V)
- C245 Series Soldering Tip(s) (specific types may vary based on purchase)
4. Орнотуу нускамалары
- ** Пакеттен чыгаруу**: Таңгактан бардык компоненттерди кылдаттык менен алып салыңыз.
- **Position**: Place the soldering station on a stable, heat-resistant surface in a well-ventilated area.
- **Connect Soldering Iron**: Insert the soldering iron handle's connector into the "TOOL" port on the rear of the station. Ensure it is securely fastened.
- **Connect Power**: Connect the power cable to the power input on the rear of the station, then plug the other end into a grounded 220V AC power outlet.
- **Prepare Tip Cleaner**: Ensure the brass wool or sponge is correctly placed in the tip cleaner receptacle on the stand. If using a sponge, dampen it slightly with distilled water.
5. Иштөө нускамалары
- **Power On**: Flip the power switch located on the rear of the station to the 'ON' position. The display will illuminate.
- **Temperature Setting**: Use the navigation buttons (up/down arrows) on the front panel to adjust the desired soldering temperature. The station features a quick heat-up time due to its advanced technology.
- **Tip Cleaning**: Before and after each use, and periodically during soldering, clean the soldering tip using the integrated brass wool or damp sponge. This removes oxidation and old solder, ensuring efficient heat transfer.
- **Soldering**: Once the desired temperature is reached (indicated on the display), the station is ready for use. Apply the soldering iron tip to the joint, then feed solder to the heated joint.
- **Tip Removal/Insertion**: The station features a quick tip change system. Use the mechanism on the stand to safely remove and insert C245 series tips without needing to turn off the station or wait for cooling.
- **Power Off**: When finished, place the iron in its stand and turn off the power switch.
Video 1: JBC Soldering Station Product Overview. This video demonstrates the general features and use of the station.
6. Техникалык тейлөө
6.1. Soldering Tip Care
- **Clean Regularly**: Always clean the tip with brass wool or a damp sponge before and after each soldering operation.
- **Tinning**: After cleaning, apply a small amount of fresh solder to the tip (tinning). This protects the tip from oxidation and prolongs its lifespan.
- **Storage**: When not in use for extended periods, ensure the tip is tinned before storing the iron in its stand.
- **Tip Replacement**: Replace tips when they become excessively worn or corroded, as this will affect heat transfer and soldering quality. Refer to Figure 7 for tip dimensions and identification.
6.2. Station Cleaning
- Ensure the station is powered off and unplugged before cleaning.
- Wipe the exterior of the station with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Keep the connectors free from dust and debris.
6.3. Сактагычты алмаштыруу
- If the station does not power on, check the fuse located on the rear panel (refer to Figure 3).
- Ensure the station is unplugged.
- Carefully remove the fuse holder and replace the fuse with one of the same type and rating (F1.25A).
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Станция күйбөй жатат. | No power supply; Blown fuse; Loose power cable. | Check power outlet and cable connection. Replace fuse (F1.25A) if blown. |
| Паяным темир ысыбайт. | Iron not properly connected; Faulty tip; Internal issue. | Ensure iron is securely connected to the TOOL port. Try a different tip. If problem persists, contact support. |
| Poor solder joints / Solder not melting easily. | Tip is dirty or oxidized; Incorrect temperature setting; Worn out tip. | Clean and tin the tip. Adjust temperature higher. Replace the soldering tip. |
| Temperature display is erratic. | Loose tip connection; Sensor issue. | Ensure tip is fully seated. If problem persists, contact support. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | CD-2BQF (also referred to as CD-2BQE in some specifications) |
| Киргизүү көлөмүtage | 220-240В AC |
| Жыштык | 50/60 Гц |
| Max Power | 120 Вт |
| Фузер | F1.25A |
| Сертификация | CE |
| Origin | ES (Испания) |
| Soldering Iron Compatibility | JBC T245-A Handle, C245 Series Tips |
9. Колдонуучунун кеңештери
- **Leverage Quick Heating**: The JBC station's advanced technology allows for extremely fast heat-up times and excellent thermal recovery. Utilize this by setting the precise temperature needed for your task, knowing it will be reached quickly.
- **Professional Grade**: This equipment is designed for high-reliability applications, often used by government contractors and OEMs. Its robust design and performance are suitable for demanding professional environments.
- **Tip Variety**: Explore the wide range of C245 series soldering tips available to match specific component sizes and soldering requirements for optimal results.
10. Кепилдик жана колдоо
10.1. Кепилдик маалыматы
JBC provides a 2-year warranty for this equipment, covering all manufacturing defects. This warranty includes the replacement of defective parts and all necessary labor.
**Exclusions**: The warranty does not cover product wear due to normal use or misuse. To validate the warranty, the equipment must be returned (postage paid) to the dealer from whom it was purchased, along with the product manual with the last sheet duly fulfilled.
10.2. Техникалык колдоо
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized JBC dealer or the point of purchase. Ensure you have your product model number and purchase details available.
