1. Продукт бүтүп калдыview
The SHAHE Digital Angle Finder Protractor is a versatile 2-in-1 tool combining a digital level and an angle gauge. It features a rechargeable battery, a magnetic base for secure attachment to metal surfaces, and a line laser for precise alignment. This device is ideal for various applications requiring accurate angle measurements.
2. Пакеттин мазмуну
Пакетти ачканда, төмөндө көрсөтүлгөн нерселердин бардыгы бар экенин жана жакшы абалда экендигин текшериңиз:
- 1 x SHAHE Digital Angle Finder Protractor (Model: SHAHE-5341-90)
- 1 x User Manual
- 1 x USB Type-C заряддоо кабели
- 1 x коргоочу баштык
3. Device Components and Features
Familiarize yourself with the various parts and functions of your digital inclinometer:
- Батарея көрсөткүчү: Учурдагы батареянын деңгээлин көрсөтөт.
- Line Laser: Emits a red laser line for alignment.
- ON/OFF Button / Laser Switch: Powers the device on/off and controls the laser.
- HOLD/Tilt% Button: Used to hold the displayed reading or switch to tilt percentage.
- ZERO баскычы: Used to set a relative zero point for measurements.
Негизги продукт өзгөчөлүктөрү:
- Relative/absolute measurements interchange at any position.
- Angle and slope readout conversion.
- Маалыматты кармоо функциясы.
- Automatic power-off if no operation within 3 minutes (display turns off after 30 seconds).
- Compact and portable design for wide application.
- Four-side built-in powerful magnets for stable attachment.
- Rechargeable 3.7V lithium battery.
4. Аппаратты заряддоо
The SHAHE Digital Angle Finder Protractor is equipped with a rechargeable 3.7V lithium battery. To charge the device:
- Аппараттын капталындагы Type-C кубаттоо портун табыңыз.
- Connect the provided USB Type-C charging cable to the device and a suitable USB power source (e.g., computer, wall adapter).
- Дисплейдеги батареянын индикатору заряддоо абалын көрсөтөт.
5. Иштөө нускамалары
5.1 Баскыч функциялары
- ON/OFF Button (ON/OFF):
- In the off state, short press to turn on.
- In the on state, long press to turn off.
- Short press once to turn on the right laser.
- Short press twice to turn on the left laser.
- Short press three times to turn on both lasers.
- Short press four times to turn off the lasers.
- HOLD/Tilt% Button (HOLD/Tilt%):
- Short press to hold the current readout data on the display.
- Long press for 2 seconds to switch the display to tilt percentage (%).
- ZERO баскычы:
- Used to reset the current measurement to 0.00° for relative measurements.
- When the display shows '▲' on the left and '▼' on the right, it means the left side is higher and the right side is lower.
- When the display shows '▼' on the left and '▲' on the right, it means the left side is lower and the right side is higher.
5.2 Absolute Measuring Mode
In this mode, the device measures the angle relative to a factory-calibrated absolute level. Simply turn on the instrument, and the readout will display the angle compared to the true horizontal (absolute level).
5.3 Relative Measuring Mode
This mode allows you to set any surface as a reference (0.00°) and measure subsequent angles relative to that reference.
- Turn on the instrument and place it on your desired reference surface.
- баскычын кыска басыңыз НӨЛ button. The display will show "0.00°".
- Move the instrument to the surface you wish to measure, or change the angle on the reference surface. The display will now show the angle value relative to your set reference.
5.4 Лазердик функция
The integrated line laser can be used for visual alignment and leveling tasks. Control the laser using the ON/OFF button as described in section 5.1.
5.5 Магниттик негиз
The inclinometer features powerful magnets on all four sides, allowing it to be stably fixed to any metal surface for hands-free operation and accurate measurements.
6. Кайра калибрлөө
The inclinometer is factory-calibrated. Recalibration is only necessary if you suspect the readings are inaccurate. Follow these steps carefully:
- Place the bottom surface of the instrument onto a level surface that has been verified as truly level.
- While the device is powered off, press and hold the НӨЛ button. Then, while still holding НӨЛ, басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button. The LCD will display "CAL1", indicating entry into calibration status.
- Hold the instrument still and press the НӨЛ button. The LCD will display "CAL2".
- Rotate the instrument 90 degrees clockwise, hold it still, and press the НӨЛ button again. The LCD will display "CAL3".
- Rotate the instrument another 90 degrees clockwise, hold it still, and press the НӨЛ button again. The LCD will display "CAL4".
- Rotate the instrument another 90 degrees clockwise, hold it still, and press the НӨЛ button again. The LCD will display "CAL5".
- Rotate the instrument a final 90 degrees clockwise, hold it still, and press the НӨЛ button again. The LCD will display "PASS", then return to "0.00°".
Маанилүү эскертүү:
- Ensure the instrument is held perfectly still when pressing the НӨЛ button during recalibration steps.
- A new level surface replaces the previous one after successful recalibration.
7. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модель номери | SHAHE-5341-90 |
| Өлчөө диапазону | 4 x 90° |
| Резолюция | 0.05° |
| Тактык | ±0.2° |
| Кайталануучулук | 0.1° |
| Line Laser Accuracy | ±5мм/2м |
| Электр камсыздоо | Rechargeable 3.7V lithium battery |
| Заряддоочу интерфейс | DC5V 400mA (Type-C) |
| Иштөө температурасы | -10°Cден 50°Cге чейин |
| Магнит | Inside (four-sided) |
| Арткы жарык | Ооба |
| Материал | Алюминий корпус |
8. Колдонуучунун кеңештери
- The device features strong magnets on all four sides, making it highly versatile for attaching to various metal surfaces during use.
- Always ensure the device is fully charged before critical measurements to avoid interruptions.
- For the most accurate readings, especially in absolute mode, ensure the surface you are measuring from is clean and free of debris.
9. Техникалык тейлөө
- Тазалоо: Аппаратты тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Сактагыч: Store the inclinometer in its protective pouch in a dry, dust-free environment when not in use. Avoid extreme temperatures.
- Батареяга кам көрүү: Батареянын иштөө мөөнөтүн оптималдаштыруу үчүн, аны тез-тез толук зарядсыздандырбаңыз. Үзгүлтүксүз кубаттап туруңуз.
10. Кыйынчылыктарды
- Туура эмес окуулар: If you suspect the device is providing inaccurate measurements, perform a recalibration as described in Section 6.
- Түзмөк күйбөй жатат: Check the battery level and ensure the device is charged. If the issue persists after charging, contact customer support.
- Laser Not Activating: Ensure the device is powered on and press the ON/OFF button multiple times to cycle through the laser modes (right, left, both, off).
11. Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.
