Fodsports Helmet Earphone & Microphone Instruction Manual

Продукт бүттүview

This manual provides instructions for the Fodsports helmet earphone and microphone accessory, designed specifically for use with Fodsports FX2 and FX10C motorcycle Bluetooth intercom systems. This accessory enhances your riding experience by providing clear audio output and reliable voice input for communication and entertainment.

Пакеттин мазмуну

Пакет төмөнкү компоненттерди камтыйт:

• Туулга колонкалары (2 даана)
• Бум микрофону (ачык беттүү туулгалар үчүн)
• Жумшак зымдуу микрофон (бетти толук жаап жүрүүчү туулгалар үчүн)
• Main Connection Cable (with USB-C connector)
• Микрофондун көбүктүү капкактары
• Adhesive Pads for Speakers and Microphone

Орнотуу нускамалары

1. Choosing the Right Microphone

• Бум микрофону: Recommended for open-face, modular, or flip-up helmets where the microphone can be easily positioned in front of your mouth.
• Жумшак зымдуу микрофон: Ideal for full-face helmets, as it can be tucked discreetly into the helmet lining.

2. Динамик орнотуу

1. Clean the inside of your helmet's ear pockets thoroughly to ensure good adhesion.
2. Attach the adhesive pads to the back of each speaker.
3. Carefully place the speakers inside the helmet's ear pockets, ensuring they are aligned with your ears for optimal sound quality. Press firmly to secure.

3. Микрофонду орнотуу

1. For Boom Microphone: Attach the adhesive pad to the microphone base. Mount it on the inside of the helmet's chin bar, positioning the microphone head approximately 1-2 cm from your mouth.
2. For Soft Wire Microphone: Secure the microphone using an adhesive pad or by tucking it into the helmet's cheek pad lining, ensuring it is positioned close to your mouth.

4. Connecting to the Intercom Unit

1. Route the speaker and microphone cables neatly within the helmet lining to avoid interference and ensure comfort.
2. Connect the main cable's USB-C connector to the corresponding port on your Fodsports FX2 or FX10C intercom unit. Ensure a secure connection.

Иштөө нускамалары

This earphone and microphone kit functions as an audio input/output accessory for your Fodsports FX2 or FX10C intercom unit. All primary controls for volume, communication, and mode selection are managed directly through your intercom unit.

Аудио ойнотуу

Once connected, all audio from your intercom unit, including music, GPS navigation, phone calls, and intercom conversations, will be routed through the helmet speakers. Adjust volume directly on your Fodsports intercom unit.

Микрофонду колдонуу

The installed microphone captures your voice for intercom communication and phone calls. Ensure it is positioned correctly for clear voice transmission and effective noise reduction.

Техникалык тейлөө

Тазалоо

• Wipe the speaker surfaces and microphone with a soft, dry, or slightly damp кездеме.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the components.
• The microphone foam covers can be gently cleaned or replaced if they become worn or dirty.

Сактагыч

When not in use, store the helmet with the installed accessory in a cool, dry place, away from direct sunlight and extreme temperatures.

Cable Care

Avoid sharp bends, kinks, or excessive pulling on the cables to prevent internal damage. Ensure cables are not pinched when putting on or taking off the helmet.

Проблемаларды чечүү

Динамиктерден үн жок

• Байланышты текшерүү: Ensure the main connection cable is securely plugged into the Fodsports intercom unit.
• Intercom Power: Verify that your Fodsports FX2 or FX10C intercom unit is powered on and functioning correctly.
• Үндүн жөндөөлөрү: Confirm that the volume on your intercom unit is not set to minimum or muted.

Poor Microphone Audio / Excessive Noise

• Микрофондун жайгашуусу: Ensure the microphone is positioned close to your mouth (1-2 cm) for optimal voice pickup.
• Микрофон түрү: Verify that the correct microphone type (boom for open-face, soft for full-face) is being used for your helmet type.
• Көбүктүү капкак: Check if the microphone foam cover is properly installed and intact to reduce wind noise.

Үзгүлтүксүз туташуу

• Коопсуз туташтыргычтар: Ensure all connectors (speakers, microphone, main cable to intercom) are fully and firmly seated.
• Кабелдик текшерүү: Visually inspect all cables for any signs of damage, fraying, or pinching.

Техникалык шарттар

Кепилдик жана колдоо

For any warranty claims, technical support, or inquiries regarding your Fodsports helmet earphone and microphone accessory, please contact Fodsports customer service or the authorized seller from whom you purchased the product. Please refer to the original Fodsports FX2 or FX10C intercom manual for specific troubleshooting and operational details related to the main intercom unit.

Колдонуучу сунуштар

• Шайкештикти текшерүү: This earphone and microphone kit is exclusively designed for Fodsports FX2 and FX10C intercom systems. It is not guaranteed to be compatible with other intercom models or brands.
• Optimal Sound Experience: To achieve the best audio quality, ensure that the speakers are positioned directly over your ears inside the helmet. Adjust their position slightly if needed after wearing the helmet.
• Таза байланыш: For maximum voice clarity and to minimize background noise, position the microphone approximately 1-2 cm from your mouth.