MAXSUN AMD B550M GAMING WIFI ICE Motherboard User Manual

1. Продукт бүтүп калдыview

The MAXSUN B550M GAMING WIFI ICE is a Micro-ATX motherboard designed for AMD AM4 socket processors, supporting Ryzen 1000-5000 series CPUs. It features dual-channel DDR4 memory support, PCIe 4.0, integrated Wi-Fi 5 and Bluetooth 4.2, and ARGB lighting capabilities.

Figure 1: MAXSUN B550M Gaming WiFi ICE Motherboard with key features highlighted.

2. Орнотуу нускамалары

2.1 Пакеттин мазмуну

Орнотуудан мурун, бардык компоненттердин бар экендигин текшериңиз:

• MAXSUN B550M GAMING WIFI ICE Motherboard
• I / O Shield
• SATA кабелдери
• WiFi антеннасы
• Колдонуучунун Колдонмосу (бул документ)
• Кепилдик картасы

2.2 Motherboard Layout

2-сүрөт: жогорудан ылдыйга view of the motherboard, showing component placement.

Figure 3: Rear I/O ports including USB, HDMI, DP, LAN, and audio jacks.

2.3 Компонентти орнотуу

Always ensure proper grounding and handle components with care to prevent electrostatic discharge (ESD). It is recommended to wear an anti-static wrist strap during installation.

1. **CPU Installation**: Open the AM4 socket lever, align the CPU with the triangle marker on the socket, gently place the CPU into the socket, and close the lever.
2. **CPU Cooler Installation**: Install your AM4 compatible CPU cooler according to its manufacturer's instructions.
3. **Memory (RAM) Installation**: This motherboard supports 2 DIMM DDR4 memory modules. Open the clips on the memory slots, align the RAM module notch with the slot key, and press down firmly on both ends until the clips snap into place. Ensure modules are installed in the correct slots for dual-channel operation (refer to motherboard diagram for specific slots).
4. **M.2 SSD Installation**: The motherboard has two M.2 slots. M2_SSD1 supports PCIe X4/X2 Gen4 SSDs/SATA drives, and M2_SSD2 supports PCIe X4/X2 Gen3 SSDs. Insert the M.2 SSD into the slot at an angle, then gently push it down and secure it with the provided screw.
5. **SATA Drive Installation**: Connect SATA data cables from your SATA SSDs or HDDs to the SATA 3.0 ports on the motherboard. Connect the other end to your storage devices.
6. **Graphics Card Installation**: Insert your PCIe x16 graphics card into the PCIEX16 4.0 slot. Ensure it is seated firmly and secured with the case screw.
7. **Power Supply Connections**: Connect the 24-pin ATX power connector and the 8-pin ATX 12V power connector from your power supply to the corresponding ports on the motherboard.
8. **Front Panel Connections**: Connect the front panel connectors (power button, reset button, HDD LED, power LED, front USB, front audio) to the F_PANEL, USB, and F_AUDIO pins on the motherboard. Refer to the motherboard manual for exact pin layouts.
9. **WiFi Antenna Installation**: Screw the included WiFi antennas onto the rear I/O panel connectors.

Figure 4: Detailed diagram showing M.2, DDR4, and USB interfaces.

3. Иштөө нускамалары

3.1 Биринчи жүктөө жана BIOS орнотуу

Upon first boot, enter the BIOS/UEFI setup to configure system settings. Typically, you press the 'DEL' or 'F2' key during startup to access the BIOS. Ensure your boot drive is correctly prioritized.

3.2 Операциялық системаны орнотуу

This motherboard supports Windows 10 64-bit, Windows 11 64-bit, and Ubuntu 64-bit operating systems. Install your preferred OS from a bootable USB drive or optical media.

3.3 Драйверди орнотуу

After OS installation, install the necessary drivers for the chipset, audio, LAN, Wi-Fi, Bluetooth, and any other integrated components. Drivers are usually provided on a CD/DVD or can be downloaded from the MAXSUN official webсайт.

3.4 ARGB Lighting Control (MaxsunSYNC)

The motherboard supports ARGB lighting with 2x 3-pin 5V ARGB headers and 1x 4-pin 12V NRGB header. Use the MaxsunSYNC lighting control software to customize lighting effects. This software allows for various styles and color adjustments.

Figure 5: MaxsunSYNC software interface for customizing ARGB lighting.

3.5 Тармактын өзгөчөлүктөрү

The integrated Realtek 8111M NIC supports 10/100/1000Mbit Ethernet. The Realtek 8821CE wireless card provides Wi-Fi 5 (802.11b/g/n/ac) and Bluetooth 4.2 connectivity. The motherboard supports network wake-up, PXE diskless, and UEFI diskless boot functionalities.

4. Техникалык тейлөө

4.1 ТӨБ коргоо

The motherboard is designed with ESD protection for air discharge (±8KV C level, ±6KV class B) and contact discharge (±6KV C level, ±3KV B class). Always ensure proper grounding of your system to maximize protection.

4.2 BIOS жаңыртуулары

Periodically check the MAXSUN official website for BIOS updates. Updating the BIOS can improve system stability, add support for new CPUs, and fix bugs. Follow the instructions provided with the BIOS update carefully.

4.3 CMOS тазалоо

If you encounter system instability or incorrect BIOS settings, you can clear the CMOS to reset BIOS settings to default. Locate the CLR_CMOS pins on the motherboard (refer to the motherboard diagram) and follow the procedure outlined in the full manual.

4.4 Системаны муздатуу

The motherboard supports intelligent fan speed control for CPU and SYSFAN2 headers. Ensure your cooling fans are properly connected and configured in the BIOS or through monitoring software for optimal thermal performance.

5. Кыйынчылыктарды

5.1 Жалпы маселелер жана чечимдер

• **System not booting/No display**:
• Check all power connections (24-pin ATX, 8-pin ATX 12V).
• Ensure CPU, RAM, and graphics card are properly seated.
• Verify monitor connection to the correct display output (graphics card or integrated graphics).
• If using integrated graphics, ensure your CPU supports it and check HDMI/DP cable and monitor compatibility.
• Try clearing CMOS.
• **CPU Compatibility**:
• This motherboard supports AMD Ryzen 1000-5000 series CPUs.
• For newer Ryzen 5000 series CPUs (e.g., Ryzen 5 5600G, Ryzen 7 5700X, Ryzen 9 5900X), a BIOS update may be required. Many users report the BIOS comes updated for 5000 series, but verify if issues arise.
• Older Ryzen CPUs like Ryzen 5 2600/2600X or Ryzen 7 2700 may not be fully supported or require specific BIOS versions.
• **Memory (RAM) Issues**:
• Ensure RAM modules are compatible DDR4 and installed correctly.
• Check for compatibility with specific RAM brands if issues occur (e.g., Asgard, Juhor).
• Verify memory frequency settings in BIOS (supports up to 3200MHz/OC).
• **M.2 SSD Not Detected**:
• Ensure the M.2 SSD is properly installed and secured.
• Check BIOS settings to ensure M.2 slots are enabled and configured correctly (PCIe or SATA mode).
• Verify compatibility of your M.2 SSD (NVMe or SATA, Gen3 or Gen4) with the specific M.2 slot used.
• **ARGB Lighting Not Working**:
• Ensure ARGB devices are connected to the correct 3-pin 5V ARGB headers or 4-pin 12V NRGB header.
• Install and configure the MaxsunSYNC software.

6. Техникалык шарттар

7. Колдонуучунун кеңештери

• **BIOS Update for Newer CPUs**: While many units ship with an updated BIOS, if you are using a Ryzen 5000 series CPU (e.g., 5600G, 5700X, 5900X) and encounter boot issues, consider updating the BIOS.
• **Integrated Graphics**: If using a G-series Ryzen CPU with integrated graphics, ensure your monitor is connected to the motherboard's HDMI or DisplayPort outputs.
• **RAM Compatibility**: This motherboard supports a wide range of DDR4 memory. If you experience instability, check your RAM's QVL (Qualified Vendor List) on the manufacturer's website or try different memory modules.
• **Grounding**: Always ensure your system is properly grounded during installation and operation to prevent electrostatic discharge and ensure stable performance.
• **Power Saving**: The motherboard features an ERP power saving function, which can be configured in the BIOS for energy efficiency.

8. Кепилдик жана колдоо

For warranty information and technical support, please refer to the warranty card included in your product package or visit the official MAXSUN webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.