1. Киришүү
The Baseus 2-in-1 device is a versatile tool designed for automotive emergencies and daily convenience. It combines a powerful car jump starter, an air compressor for tire inflation, a portable power bank for charging electronic devices, and an emergency light. This manual provides essential information for safe and effective operation of your device.
2. Коопсуздук маалыматы
- Колдонуудан мурун бардык нускамаларды кунт коюп окуп чыгыңыз.
- Аппаратты балдардан алыс кармаңыз.
- Do not disassemble or modify the device. Unauthorized modifications may lead to hazards and void the warranty.
- Жакшы желдетилген жерлерде колдонуңуз.
- Avoid exposing the device to extreme temperatures (below -10°C or above 60°C), direct sunlight, or high humidity.
- Ensure correct polarity when connecting the jump starter clamps to a car battery to prevent damage and injury. The smart clamp features reverse polarity protection with an audible alarm.
- Do not continuously inflate for more than 20 minutes to prevent overheating. Allow the device to cool down between uses if necessary.
- The device incorporates 12 battery protection features: Over-voltage, Under-томtage, Over-current, Over-discharge, Charge overheating, Charge low-temperature, Discharge overheating, Discharge low-temperature, Short circuit, Reverse polarity charging, Anti-reverse charging, and Start-up timeout protection.
3. Пакеттин мазмуну
Сураныч, пакетте төмөнкү нерселерди текшериңиз:
- Baseus 2-in-1 Jump Starter, Power Bank, and Air Compressor
- Smart Clamp with Reverse Polarity Protection
- Инфляциялык шланг
- Various Nozzles (e.g., for car tires, motorcycle tires, bicycle tires, basketballs, balloons)
- USB заряддоо кабели
- Сактоочу баштык
- User Manual
4. Продукт бүтүп калдыview
The Baseus 2-in-1 device integrates multiple functions into a compact design:
- LED санарип дисплей: Shows current battery level and tire pressure.
- Башкаруу баскычтары:
- Power Display Button: Press to check power level.
- '+' баскычы: Increase air pressure preset value. Long-press to speed up.
- '-' баскычы: Decrease air pressure preset value. Long-press to slow down.
- Режимди которуу баскычы: Press to switch between inflation modes (Car, Motorcycle, Bicycle, Ball, Balloon). Long-press for 2 seconds to switch displayed units (PSI-BAR-KPA).
- Жарык баскычы: Long-press for 2 seconds to turn on flashlight. Press again to change lighting modes.
- Start/Stop Inflation Button: Press to start inflation as preset value. Press again to stop.
- Порттор: Type-C input/output, USB output, EC5 Engine Start port.
- Ички компоненттери: Features a 19-cylinder high-pressure pump and a copper permanent magnet motor for powerful and stable operation.
5. Орнотуу
5.1 Аппаратты заряддоо
Before first use, fully charge the jump starter. It is recommended to keep the device charged above 75% for optimal jump-starting performance, and above 50% for zero-voltage баштоо.
- Connect the provided USB charging cable to the Type-C input port on the device.
- Connect the other end of the cable to a compatible USB power adapter (e.g., 5V/2.4A or 9V/2A).
- LED дисплей кубаттоонун жүрүшүн көрсөтөт. Толук кубаттоо болжол менен 3 саатты талап кылат.
6. Иштөө нускамалары
6.1 Jump Starting a Car
This device is suitable for 12V/4.0L gasoline cars and 12V/2.5L diesel cars.
- Connect Smart Clamps: Smart clamps into the EC5 port of the jump starter. The indicator on the smart clamp кызыл жана жашыл түстөрдө кезектешип жаркылдайт.
- Унаа батареясына туташуу: Open the engine hood of your car. Connect the red clamp унаанын аккумуляторунун оң (+) терминалына жана кара clamp to the negative (-) terminal. Ensure polarities are connected properly. If connected incorrectly, the smart clamp will sound a buzzing alarm.
- Унааны баштоо: Go back into your car and start the engine. The jump starter will discharge high voltage after it's connected.
- Ажыратуу: After your car starts, please disconnect the jump starter immediately.
Эскертүү: For better effect, please make sure the battery level of the jump starter is above 50% for zero-voltage start, and above 75% for normal start. Keep the entire jump start process within 30 seconds.
6.2 Inflating Tires and Other Items
The device features a 19-cylinder high-pressure pump for ultra-fast inflation with auto-stop functionality.
- Connect Hose and Nozzle: Connect the inflation hose to the device and attach the appropriate nozzle for your item (car tire, motorcycle tire, bicycle tire, basketball, balloon).
- Режимди тандоо: Press the mode switch button to select the desired inflation mode. Default pressures are:
- Car mode: 2.5 BAR (adjustable range: 1.8-2.8 BAR)
- Motorcycle mode: 2.6 BAR (adjustable range: 1.8-2.8 BAR)
- Bike mode: 45 PSI (adjustable range: 30-50 PSI)
- Ball mode: 8.0 PSI (adjustable range: 7-9 PSI)
- Balloon mode: 8.0 PSI (adjustable range: 7-9 PSI)
- басымды жөндөө: Use the '+' and '-' buttons to set your desired pressure.
- Инфляциянын башталышы: Press the start inflation button. The device will automatically stop when the preset pressure is reached.
Эскертүү: After your turn on the inflation mode, it will begin to test the tire pressure and display the number on the LED screen. One continuous inflation time must not exceed 20 minutes. The actual use may be slightly different depending on specific circumstances.
6.3 Power Bank катары колдонуу
The device can also function as a portable power bank to charge your electronic devices.
- Connect your phone, tablet, or other compatible device to the USB output port (5V/3A) or the Type-C port (5V/2.4A Max, 9V/2A Max).
- The device provides two 15W output ports for fast charging.
6.4 Using the Emergency Light
The built-in emergency light is useful in low-light conditions or emergencies.
- Күйгүзүү: Long-press the light button for 2 seconds to turn on the flashlight function (Normal lighting mode).
- Режимдерди өзгөртүү: Press the light button again to cycle through different lighting modes:
- Normal lighting (for general illumination)
- SOS mode (flashing alternately, for signaling help)
- Strobing mode (alarmingly bright, to scare away danger)
7. Техникалык тейлөө
- Түзмөктү таза жана кургак кармаңыз. Жумшак, кургак чүпүрөк менен сүртүңүз.amp зарыл болсо, кездеме.
- Аппаратты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
- If the device is not used for an extended period, recharge it periodically (e.g., every 3-6 months) to maintain battery health and prolong its lifespan.
- Аппаратты жерге түшүрүүдөн же катуу таасирлерден сактаныңыз.
- Аппаратта катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
8. Кыйынчылыктарды
- Device not charging / Battery level stuck: Ensure you are using a compatible charger with the correct voltagд жана amperage (e.g., 9V/2A or 5V/2.4A). Check the Type-C cable and port for damage.
- Car not starting: Verify the jump starter's battery level is sufficient (above 75% for normal start, above 50% for zero-voltage start). Check that the smart clamps are connected correctly to the car battery terminals (red to positive, black to negative). If an alarm sounds, correct the polarity. Ensure the car battery is not severely damaged or completely dead beyond the device's capacity.
- Inflation issues: Check that the inflation hose is securely connected to both the device and the item's valve. Ensure the correct inflation mode and preset pressure are selected. If the device stops prematurely, check if the 20-minute continuous inflation limit has been reached and allow it to cool down.
- Аппараттын ысып кетиши: If the device feels excessively hot, stop use immediately and allow it to cool down in a well-ventilated area. Avoid continuous operation for prolonged periods, especially during inflation.
9. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Продукт аты | Baseus Super Energy 2-in-1 Jump Starter (1000A) |
| Модель № | BS-CH003 |
| Түс | Кара |
| Материал | ABS |
| Салмагы | About 1360g (Including packaging) |
| Батарея сыйымдуулугу | 8000mAh/29.6Wh |
| Чыгуунун кубаттуулугу | 4800mAh |
| Баштоо агымы | 500A |
| Жогорку ток | 1000A |
| Type-C киргизүү | 5V/2.4A (Max), 9V/2A (Max) |
| USB чыгышы | 5V/3A |
| Заряддоо убактысы | 3 саатка жакын |
| Inflation Pump Power | 54 Вт |
| басым диапазону | 5-150psi (display shows 150 if over 150psi, supports pressure within 120psi) |
| Inflation Time (R195 tire) | 7-9 мүнөт |
| Иштөө температурасы | -10°Cден 60°Cге чейин |
| Сертификаттар | CE, FCC, MSDS, RoHS |
10. Колдонуучунун кеңештери
- For optimal performance when jump starting a vehicle, ensure the jump starter is sufficiently charged (above 75%).
- When inflating, avoid exceeding 20 minutes of continuous operation to prevent overheating and ensure device longevity.
- If the device is not charging properly, verify that you are using a compatible charger with the correct voltagд жана amperage (e.g., 9V/2A or 5V/2.4A).
- The device can inflate various items like car tires, motorcycle tires, bicycle tires, basketballs, and balloons. Always select the appropriate mode and preset pressure for best results.
- The device is designed to operate in a wide temperature range (-10°C to 60°C), making it reliable in various weather conditions.
11. Кепилдик жана колдоо
For warranty information and customer support, please refer to the seller's policies or contact Baseus customer service directly. Keep your proof of purchase for any claims.
