ORICO 6829C3-C Hard Drive Docking Station User Manual

1. Киришүү

The ORICO 6829C3-C is a dual-bay hard drive docking station designed for 2.5-inch and 3.5-inch SATA HDDs/SSDs. It features a high-speed USB 3.2 Gen2 Type-C interface, supporting up to 10Gbps data transfer rates. A key feature is its offline clone function, allowing direct disk-to-disk copying without a computer. The docking station supports up to 18TB per bay, totaling 36TB maximum capacity, and includes a 12V3A power supply for stable operation.

Image: ORICO 6829C3-C Hard Drive Docking Station highlighting 10Gbps speed, power supply, and offline clone capability.

2. Коопсуздук маалыматы

• Колдонуудан мурун кубат адаптери туура туташтырылганын текшериңиз.
• Do not move or remove hard drives during data transfer or cloning operations to prevent data loss.
• Түзмөктү суудан, оттон жана өтө жогорку температурадан алыс кармаңыз.
• Аппаратты өз алдынча бөлүүгө же оңдоого аракет кылбаңыз. Жардам алуу үчүн кардарларды тейлөө кызматына кайрылыңыз.
• Always back up important data before performing any disk operations, especially cloning.

3. Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

• ORICO 6829C3-C Hard Drive Docking Station
• 12V3A кубат адаптери
• 2-in-1 Multi USB Cable (Type-C to Type-C/USB-A, supports PD 60W)
• Колдонуучунун Колдонмосу (бул документ)

Image: The ORICO 6829C3-C docking station along with its 12V3A power adapter and versatile USB cable.

4. Продукт бүтүп калдыview

The docking station features two bays for hard drives, indicator lights for power and activity, and a clone function switch. It is designed with dust-proof baffles and anti-slip pads for durability and stability.

Image: The vertical design of the docking station, which provides an increased heat dissipation area for optimal performance.

Image: The docking station connected to its 12V/3A power adapter, highlighting built-in protections against over-voltage, over-current, leakage, and short-circuits.

5. Техникалык шарттар

Image: Detailed specifications table for various ORICO Hard Drive Docking Stations, including the 6829C3-C model.

6. Орнотуу колдонмосу

6.1 Кубат адаптерин туташтыруу

1. Connect the provided 12V3A power adapter to the DC input port on the back of the docking station.
2. Кубат адаптерин розеткага сайыңыз.

6.2 Inserting Hard Drives

The docking station supports both 2.5-inch and 3.5-inch SATA HDDs/SSDs. It is tool-free and drive-free.

1. Ensure the docking station is powered off.
2. Gently slide your 2.5-inch or 3.5-inch SATA HDD/SSD into the desired bay (Source or Target slot) until it is firmly seated.
3. The spring cover dust-proof design will help protect the drives.

Image: Illustration of compatible 2.5-inch and 3.5-inch SATA hard drives, and incompatible IDE hard drives.

6.3 Компьютерге туташуу

1. Connect one end of the provided 2-in-1 multi USB cable to the Type-C port on the docking station.
2. Connect the other end of the cable to a compatible USB port (Type-C or Type-A) on your computer, laptop, or other device.
3. Turn on the power switch on the docking station. The LED indicator will light up.

Image: The docking station connected to a computer, demonstrating full-speed, fast data transfer at 10Gbps.

6.4 Initial Disk Formatting (for new drives)

If your new hard disk is not recognized by your computer, it may need to be formatted:

1. Right-click on 'This PC' (or 'My Computer') and select 'Manage'.
2. In the Computer Management window, select 'Disk Management'.
3. Locate the new disk (it might appear as 'Unallocated Space').
4. Right-click on the disk and select 'Initialize Disk'.
5. Бөлүм стилин тандаңыз:
   • For Disk Capacity ≤ 2TB, choose **MBR**.
   • For Disk Capacity > 2TB, choose **GPT**.
6. Follow the prompts to create a 'New Simple Volume' and complete the formatting process.

7. Иштөө нускамалары

7.1 Normal Data Transfer

Once connected to a computer and recognized, the inserted hard drives will appear as removable storage. You can drag and drop files, copy, paste, or use any file management software to transfer data between your computer and the drives, or between the two drives in the docking station (via the computer).

7.2 Оффлайн клондоо функциясы

The offline clone function allows you to duplicate a source disk to a target disk without needing a computer. This is ideal for system backups or disk upgrades.

Image: The ORICO 6829C3-C docking station demonstrating the offline clone function, copying data between two disks without a computer.

Important Note: The target disk (Disk B) will be formatted when starting the offline clone. Please back up any data on Disk B before starting the clone process.

1. Insert Disks: Ensure the docking station is disconnected from the computer and powered off. Insert the source disk (Disk A) into the 'Source' slot and the target disk (Disk B) into the 'Target' slot.
2. Туташуу кубаты: Connect the power adapter to the docking station and plug it into a wall outlet.
3. Клондоону баштоо: Switch the button at the back of the docking station to 'Clone' mode. Turn on the power.
4. Start Clone: Press the 'Start' button at the back of the docking station. The indicator lights will flash, indicating the cloning process has begun.
5. Аяктоо: The indicator lights will become constantly on once the clone is finished.

Эскертүүлөр:

• The target drive (Disk B) must be equal to or larger in capacity than the source drive (Disk A).
• Do not move or remove disks during the cloning process.
• Do not connect the docking station to a computer during an offline clone.
• After cloning, the target disk may need to be activated by connecting it to a computer (PC Management – Disk Management – Online).
• The offline clone speed is approximately 500GB per 2 hours.

8. Техникалык тейлөө

8.1 Авто уйку режими

The docking station features a 10-minute auto sleep mode. This function effectively extends the lifespan of your hard drives and helps prevent data loss or corruption by putting the drives into a low-power state when inactive.

Image: Illustration of the 10-minute auto sleep mode, designed to extend hard drive lifespan and prevent data loss.

Notice: If you need to disable auto sleep mode, be aware that operations might lead to data loss if not handled carefully. It is recommended to keep this function enabled for data safety and drive longevity. If you need to reset the sleep mode, please contact customer service.

8.2 Тазалоо

Use a soft, dry cloth to clean the exterior of the docking station. Do not use liquid cleaners or solvents.

9. Кыйынчылыктарды

9.1 Көп берилүүчү суроолор (FAQ)

Q: What kind of hard disks does this dock support?

A: 2.5/3.5-inch SATA SSD or HDD are supported.

Q: What devices does this dock support?

A: It supports laptops, PCs, smart TVs, PS4/5, phones (with OTG function), iPads, routers, projectors, DVDs, and TV boxes.

Q: What's the transmission speed?

A: The theoretical transmission speed is 10Gbps via the Type-C port. The SATA port speed is 6Gbps. The offline clone speed is approximately 500GB/2hrs. Actual speed may be affected by the host and terminal devices used, as well as the capacity of the target disk.

Q: What is the difference between the docking station and an SSD enclosure?

A: They share the same function (data storage/transfer) but vary in appearance. An SSD enclosure is typically more portable, while a docking station is more user-friendly for frequent drive swapping and often offers better heat dissipation.

Q: Does the dock need to connect the power adapter while using it?

A: Yes, the docking station requires the external 12V3A power adapter for operation.

Q: Why is the new hard disk not recognizable?

A: Please format the new disk before use. Refer to section 6.4 for detailed formatting instructions.

Q: Why can't the PC recognize the HDD/SSD?

A: First, check if your HDD/SSD is functional. Try with another known working drive. If the issue persists, ensure all cables are securely connected and the power is on. If still unresolved, contact customer service.

Q: Can't achieve 10Gbps speed?

A: 10Gbps is an ideal state. Actual speeds are affected by the host device, cables, and the hard drive itself. Ensure you are using a USB 3.2 Gen2 compatible port and the provided Type-C to Type-C cable for optimal performance.

С: Кайсы операциялык системалар колдоого алынат?

A: The docking station is fully compatible with Windows, Mac OS, and Linux systems. It is backward compatible with Windows 10/9/8 systems.

Q: Which brands of SSD/HDD are supported?

A: It supports major brands such as Seagate, Toshiba, Western Digital, Samsung, Hitachi, etc.

9.2 Колдонуучуга кеңештер

• For optimal performance, always use the provided ORICO power adapter and USB cable.
• When performing an offline clone, double-check that the source and target drives are correctly identified to avoid accidental data loss.
• If connecting to a phone, ensure the phone supports the OTG (On-The-Go) function.
• Regularly check for firmware updates from the ORICO official website, if available, to ensure compatibility and performance.

10. Кепилдик жана колдоо

For any issues, questions, or technical support regarding your ORICO 6829C3-C Hard Drive Docking Station, please contact ORICO customer service. Provide your product model number and a detailed description of the issue for faster assistance.