ANCEL HD601 Heavy Duty Truck Scanner User Manual

1. Киришүү

The ANCEL HD601 is a professional handheld diagnostic tool designed for heavy-duty commercial vehicles. It provides quick and easy access to the vehicle's Electronic Control Units (ECUs) and sensors, enabling users to read and clear fault codes, and analyze live sensor data. This device supports all major truck models that comply with standard protocols such as SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4, ISO 9141-2, and ISO 27145-4.

Figure 1: ANCEL HD601 Scanner and included diagnostic cables.

2. Пакеттин мазмуну

Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы камтылганын текшериңиз:

• 1 x ANCEL HD601 Handheld Truck Code Reader
• 1 x 6/9 pin connect cable
• 1 x User Manual

Figure 2: ANCEL HD601 Product Package.

3. Продукциянын өзгөчөлүктөрү

The ANCEL HD601 offers comprehensive diagnostic capabilities for heavy-duty vehicles:

• HD OBD: Diagnostic procedures for diesel 6/9 OBD vehicles, supporting SAE J1587/J1708, J1939 protocol, and ISO 27145 protocol.
• WWH-OBD (World-Wide Harmonized On-Board Diagnostics): Diagnostic procedures for vehicles complying with ISO 27145-4, ISO 14230-4, ISO 15764-4, and ISO 9141-2 protocols.
• Full System Scan: Capable of scanning all major truck systems including Engine System, TPMS, EBS System, SCOT System, Injector System, ABS, Transmission, SRS, TPS System, ESP System, Gas Treatment System, Instrument System, Battery Control Module, and Vehicle Interface Module.
• Негизги диагностикалык функциялар:
  • Read ECU Information: Retrieve and display control system module information.
  • Read Fault Codes: Access and display current and historical Diagnostic Trouble Codes (DTCs).
  • Clear Fault Codes: Erase DTCs and freeze frame data from the vehicle system module.
  • Жандуу маалыматтар: View real-time operating parameters of the current system module, often presented in graph format.
  • Freeze Frame Test: Capture a snapshot of sensor data when a fault code is triggered.
  • DTC Look-Up: Provides definitions for diagnostic trouble codes.
• Колдонуучу интерфейси: Intuitive menu navigation with a 2.8-inch LCD display.
• Тилди колдоо: English and Spanish.
• Программалык камсыздоону жаңыртуу: Lifetime free updates via PC.

Figure 3: All-System Scan Tool Capabilities.

Figure 4: Key Diagnostic Functions Overview.

4. Орнотуу жана туташуу

To begin using your ANCEL HD601 scanner, follow these steps to connect it to your vehicle:

1. Locate the diagnostic port on your heavy-duty truck. This is typically a 6-pin, 9-pin, or standard OBDII (16-pin) connector.
2. Select the appropriate diagnostic cable from the package (6/9 pin cable or the integrated OBDII connector).
3. Connect the scanner's cable to the vehicle's diagnostic port. Ensure a secure connection.
4. Turn the vehicle's ignition to the ON position (engine can be off or running, depending on the diagnostic task).
5. The scanner will power on automatically. If not, check the connection and vehicle ignition.

Figure 5: Interface Connection Diagram.

5. Сканерди иштетүү

The ANCEL HD601 features a user-friendly interface with dedicated buttons for navigation and function selection.

Figure 6: ANCEL HD601 in use.

5.1. Меню навигациясы

Багыттоочу жебе баскычтарын колдонуңуз (▲, ▼, ◀, ▶) меню параметрлери аркылуу өтүү үчүн басыңыз. O (Enter) button to confirm a selection, and the ↩ (Return) button to go back to the previous screen.

Figure 7: Main Menu Interface.

5.2. HD OBD Diagnostics

From the main menu, select "HD OBD" to access diagnostic functions for diesel 6/9 OBD vehicles. This menu typically includes:

• Fast Scan: Performs a quick scan of the vehicle's systems.
• Complete Scan: Conducts a thorough scan (approx. 60 seconds).
• Унаа маалыматы: Displays VIN, calibration IDs, and other vehicle details.
• J1939 Protocol / J1708/J1587 Protocol: Specific protocol diagnostics.
• SAE J2012 DTC Display: Displays DTCs according to SAE J2012 standards.

5.3. WWH-OBD Diagnostics

Select "WWH-OBD" for diagnostics on vehicles complying with ISO 27145-4 and other harmonized protocols. This section includes:

• Generic OBDII and EOBDII: Standardized diagnostic functions.
• DTC издөө: Provides definitions for retrieved trouble codes.

5.4. Ката коддорун окуу жана тазалоо

To read fault codes:

1. Navigate to the "Information" menu under either HD OBD or WWH-OBD.
2. Select "Read Current Codes" or "Read History Codes". The scanner will display any detected fault codes.

Ката коддорун тазалоо үчүн:

1. From the "Information" menu, select "Clear Current Codes" or "Clear History Codes".
2. A confirmation prompt will appear. Ensure the ignition is ON and the engine is stopped. Confirm to proceed.
3. Note: Clearing codes will erase DTCs and Freeze Frame data.

5.5. Live Data Analysis

The Live Data function allows you to monitor real-time sensor readings and operational parameters.

1. From the "Information" menu, select "Live Data".
2. Choose the specific parameters you wish to monitor (e.g., Accelerator Pedal Position, Engine Gas Flow Rate).
3. The data will be displayed, often with options to view in graph format for easier analysis.

6. Программаны жаңыртуу

The ANCEL HD601 supports lifetime free software updates to ensure compatibility with new vehicle models and diagnostic protocols. Follow these steps to update your device:

1. Download the upgrade program from the official ANCEL webсайт (www.anceltech.com) to a Windows 10 computer.
2. Connect the HD601 scanner to your Windows 10 computer via a mini USB cable.
3. On the scanner, navigate to the "ABOUT" menu and select "Update Mode". The scanner will enter update mode.
4. Launch the update program on your Windows 10 computer and select the appropriate communication port.
5. Click the "Start Upgrade" button within the software to initiate the update process.
6. Once the upgrade is complete, a confirmation message will appear on the screen. You can verify the new version number in the "ABOUT / Tool Information" menu on your scanner.

Figure 8: Software Upgrading Process.

6.1. Troubleshooting Update Issues

If the update process is interrupted or the system crashes, you can re-enter update mode by following these steps:

1. Disconnect the USB cable from the scanner.
2. басып кармап турганда O (Enter) key, reconnect the scanner to the Windows 10 computer via the mini USB cable.
3. бошотуңуз O (Enter) key when three indicator lights on the scanner illuminate. The scanner will then re-enter update mode.

7. Унаа шайкештиги

The ANCEL HD601 is designed to support a wide range of heavy-duty trucks. Below is a list of some supported models and the systems they can diagnose:

Figure 9: Supported Heavy Duty Truck Models.

Эскертүү: This list is not exhaustive. For specific model and system compatibility, please refer to the official ANCEL webсайтка же кардарларды колдоо менен байланышыңыз.

8. Техникалык шарттар

Figure 10: ANCEL HD601 Dimensions and Connectors.

9. Колдонуучунун кеңештери

• Always ensure the vehicle's ignition is in the ON position before connecting the scanner for diagnostics.
• For optimal performance and access to the latest vehicle data, regularly update the scanner's software using the provided instructions.
• When diagnosing specific truck models, especially those from less common manufacturers, it is advisable to confirm compatibility with ANCEL's official resources.

10. Кепилдик жана колдоо

The ANCEL HD601 comes with a 1-year warranty from the date of purchase. ANCEL also provides lifelong free engineer technical guidance. For any technical assistance or inquiries, please contact ANCEL customer support.

• Кепилдик: 1 year on all products.
• Техникалык жетекчилик: Lifelong free engineer technical guidance.
• Кардарларды колдоо: All emails will be answered within 24 hours.