ANERN AN-SCI-MAX-10200, AN-SCI-ECO-6200

ANERN Hybrid Solar Inverter User Manual

1. Киришүү

This manual provides detailed instructions for the ANERN Hybrid Solar Inverter, covering models AN-SCI-MAX-10200 and AN-SCI-ECO-6200. It includes information on installation, operation, charging and output modes, Wi-Fi monitoring, and specifications for these pure sine wave off-grid inverters with built-in MPPT solar charge controllers. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the inverter.

ANERN Hybrid Solar Inverter MAX-10200 with key features: 10.2KW 48V, 160A Max. Charging Current, 500VDC Max PV Array Voltage, 10200W Rated Output Power, Optional WiFi Mode.

Figure 1: ANERN Hybrid Solar Inverter MAX-10200

2. Коопсуздук маалыматы

Attention: This is an off-grid inverter.

Low power inverters of 3.2KW and below need to be connected to batteries for use.

  • Install circuit breakers for all lines. Do not connect or disconnect lines at will after power is applied.
  • The starting power of inductive load electrical appliances shall be at least three times the rated power of the electrical appliances. If the starting power exceeds the inverter power, the inverter may be damaged. Please select a suitable model before purchasing.
  • Connect the circuits correctly and install circuit breakers for each circuit.
Safety warning showing incorrect wiring leading to sparks and correct wiring with circuit breakers.

Figure 2: Importance of installing circuit breakers for safety.

3. Продукт бүтүп калдыview

The ANERN Hybrid Solar Inverter features a user-friendly interface and robust design for reliable power conversion. Key components are identified below:

Diagram of the inverter showing front, side, and bottom views with numbered components.

3-сүрөт: Продукт бүттүview Диаграмма

  1. LCD дисплей
  2. Статус көрсөткүчү
  3. Заряддоо көрсөткүчү
  4. Ката көрсөткүчү
  5. Функция баскычтары
  6. Күйгүзүү/өчүрүү
  7. AC киргизүү
  8. Негизги чыгаруу
  9. Экинчи чыгаруу
  10. Батарея киргизүү
  11. PV киргизүү
  12. Чаңга каршы комплект
  13. RS-232 communication port / Wifi-port

4. Техникалык шарттар

4.1 General Specifications (AN-SCI-MAX-10200)

АтрибутНарк
Бренд атыАНЕРН
Модель номериAN-SCI-MAX-10200
Номиналдуу кубаттуулук8200 Вт/10200 Вт
Толук күч16400 Вт/20400 Вт
Output Current160A/180A
Чыгуу күчү1 - 200 кВт
Өлчөмү630*420*250мм
Output TypeБИР
Салмагы20кг
Чыгуу жыштыгы50Гц/60Гц
Акылдуу түзмөкОоба
OriginМатерик Кытай
СертификацияCE, RoHS
Которуу убактысы10 ms (UPS) ; 20 ms ( Appliances)
DescriptionPure sine wave inverter charger
Батарея Voltage48V
Киргизүү көлөмүtage230Vac
ФункцияHybrid inverter 48V
Функция 1Solar inverter 230V
Торчонун түрүOn/Off-grid inverter
Толкун формасыТаза синус толкун
Floating Charge Voltage54VDC
Max. Заряддоо тогу160A
PV Array Power8200 Вт/10200 Вт
MPPT диапазону @ Operating Voltage90 ~ 500 VDC
Maxmium PV Array Open Circuit Voltage500VDC
Байланыш интерфейсиWIFI
Maxmium Efficiency98%

4.2 Detailed Specifications (SCI-MAX-6200)

ПараметрНарк
МоделSCI-MAX-6200
НИНАЛДУУ КҮЧ6200 Вт
Максималдуу PV киргизүү күчү8200 Вт
PV INPUT (DC)
Номиналдуу DC Voltage/Максималдуу туруктуу токтун көлөмүtage360VDC/500VDC
Start-up Voltage/Баштапкы тамактандыруунун көлөмүtage90VDC/120VDC
MPPT DC көлөмүtage Диапазон90-450VDC
MPPT трекерлеринин саны/максималдуу киргизүү тогу1/27A
ТОРГО ЧЫГЫШЫ (AC)
Номиналдуу AC Output Voltage220/230 / 240VAC
AC Output Voltage Диапазон195.5-253VAC
Номиналдуу AC чыгыш ток35.6A
Power Factor>0.99
Feed-In Grid жыштык диапазону49-51Гц / 59-61Гц
НАТЫЙЖАЛУУЛУК
Максималдуу конвертациялоо эффективдүүлүгү (күн энергиясынан AC энергиясына)98%
ЭКИ ЖҮКТӨНҮН ЧЫГУУ КУБАТЫ
Толук жүк6200 Вт
Максималдуу негизги жүк6200 Вт
Максималдуу экинчи жүктөө (батарея режими)2733 Вт
Main Load Cut Off Voltage44VDC
Main Load Return Voltage48VDC
ТАРМАДАН ТЫШКАН ИШ
AC Start-up Voltage/Auto Restart Voltage120-140VAC/180VAC
Кабыл алынуучу AC киргизүү Voltage Диапазон90-280VAC же 170-280VAC
Максималдуу AC киргизүү агымы40A
Номиналдуу иштөө жыштыгы50/60 Гц
Толук күч16400 Вт
БАТАРЕЯ РЕЖИМИНИН ЧЫГЫШЫ (AC)
Номиналдуу Чыгуу Voltage220/230 / 240VAC
Output WaveformТаза синус толкун
Натыйжалуулук (DC AC)94%
БАТАРЕЯ ЖАНА ЗАРЫНДАГЫЧ
Номиналдуу DC Voltage48VDC
Максималдуу заряддоо агымы (Күн энергиясы менен AC)160A
Максималдуу AC заряддоо агымы140A
ГЕНЕРАЛ
Өлчөмү, D x W x Y (мм)500*390*130мм
Таза Салмагы (кг)13.1кг
Байланыш интерфейсиWIFI
Нымдуулук5%дан 95%га чейин Салыштырмалуу нымдуулук (конденсацияланбаган)
Иштөө температурасы-10°C - 50°C
Сактоо температурасы-15°C - 60°C

4.3 Detailed Specifications (SCI-ECO-3600)

ПараметрНарк
МоделSCI-ECO-3600
НИНАЛДУУ КҮЧ3600 Вт
Максималдуу PV киргизүү күчү6200 Вт
PV INPUT (DC)
Номиналдуу DC Voltage/Максималдуу туруктуу токтун көлөмүtage360VDC/500VDC
Start-up Voltage/Баштапкы тамактандыруунун көлөмүtage90VDC/120VDC
MPPT DC көлөмүtage Диапазон90-450VDC
MPPT трекерлеринин саны/максималдуу киргизүү тогу1/27A
ТОРГО ЧЫГЫШЫ (AC)
Номиналдуу AC Output Voltage220/230 / 240VAC
AC Output Voltage Диапазон195.5-253VAC
Номиналдуу AC чыгыш ток15.7A
Power Factor>0.99
Feed-In Grid жыштык диапазону49-51Гц / 59-61Гц
НАТЫЙЖАЛУУЛУК
Максималдуу конвертациялоо эффективдүүлүгү (күн энергиясынан AC энергиясына)98%
ЭКИ ЖҮКТӨНҮН ЧЫГУУ КУБАТЫ
Толук жүк3600 Вт
Максималдуу негизги жүк3600 Вт
Максималдуу экинчи жүктөө (батарея режими)1200 Вт
Main Load Cut Off Voltage22VDC
Main Load Return Voltage26VDC
ТАРМАДАН ТЫШКАН ИШ
AC Start-up Voltage/Auto Restart Voltage120-140VAC/180VAC
Кабыл алынуучу AC киргизүү Voltage Диапазон90-280VAC же 170-280VAC
Максималдуу AC киргизүү агымы30A
Номиналдуу иштөө жыштыгы50/60 Гц
Толук күч7200 Вт
БАТАРЕЯ РЕЖИМИНИН ЧЫГЫШЫ (AC)
Номиналдуу Чыгуу Voltage220/230 / 240VAC
Output WaveformТаза синус толкун
Натыйжалуулук (DC AC)94%
БАТАРЕЯ ЖАНА ЗАРЫНДАГЫЧ
Номиналдуу DC Voltage24VDC
Максималдуу заряддоо агымы (Күн энергиясы менен AC)120A
Максималдуу AC заряддоо агымы100A
ГЕНЕРАЛ
Өлчөмү, D x W x Y (мм)420*350*110мм
Таза Салмагы (кг)9
Байланыш интерфейсиWIFI
Нымдуулук5%дан 95%га чейин Салыштырмалуу нымдуулук (конденсацияланбаган)
Иштөө температурасы-10°C - 50°C
Сактоо температурасы-15°C - 60°C

5. Орнотуу жана орнотуу

5.1 General Wiring Diagram

The following diagram illustrates a typical wiring setup for the hybrid solar inverter in a residential application. Ensure all connections are made securely and according to local electrical codes.

Wiring diagram showing solar panel array connected to a combiner box, then to a DC disconnect, then to the inverter. The inverter is connected to a DC breaker panel, an AC breaker panel, and an kWh meter, which then connects to the grid and to AC loads for property use.

Figure 4: Typical Solar Inverter Wiring Diagram

5.2 PV Module Connection

Before connecting to PV modules, install a DC circuit breaker separately between the inverter and PV modules. This is crucial for system safety and efficient operation. Use appropriate cables for PV module connection to reduce the risk of injury.

МоделЗым өлчөмүКабель (мм²)Моменттин мааниси (макс)
3.6KW/4.2KW/6.2KW1 x 2AWG252 Нм

5.3 Dual AC Output and Input (MAX-10.2KW)

The MAX-10.2KW model features dual AC outputs and dual MPPT inputs. The dual input allows for two channels with 18A each, totaling 36A for solar panel connection.

Diagram showing the dual AC output and dual PV input connections on the ANERN MAX-10200 inverter. Primary input and secondary input for PV1 and PV2 channels are 18A each. Main output and second output for AC are shown.

Figure 5: Dual AC Output and Dual PV Input for MAX-10.2KW

5.4 ECO Series Upgrade (ECO-3600 & ECO-6200)

The AN-SCI-ECO3600 & 6200 series are upgraded versions. They feature dual AC outputs, allowing you to power two different loads simultaneously. The MC4 connector at the PV end has been eliminated to reduce logistics and transportation damage.

Diagram showing the upgraded back panel of AN-SCI-ECO3600 & 6200 series inverters, highlighting the added dual AC outputs (Main Out and Second Out) and the elimination of the MC4 connector at the PV input end.

Figure 6: ECO Series Upgraded Back Panel

6. Иштөө нускамалары

6.1 Power On/Off Sequence

  • Баштапкы ырааттуулук: First, turn on the battery switch, then start the inverter, and finally turn on the circuit breakers for photovoltaic (PV), mains, and load switches.
  • Өчүрүү ырааттуулугу: Turn off the switches of load, PV, and mains, then turn off the inverter, and finally turn off the battery.

6.2 заряддоо режимдери

The inverter offers three charging modes to fulfill different application requirements:

Diagram illustrating three charging modes: 1. Solar energy priority, 2. Solar + Utility at the same time, 3. ONLY Solar Charge Batteries. Also shows two output modes: 1. Solar Priority Output, then Utility, 2. Solar Priority Output, then Battery, finally Power Supplier.

Figure 7: Charging and Output Modes

  1. Күн энергиясынын артыкчылыгы: Prioritizes charging from solar panels.
  2. Күн энергиясы + бир эле учурда коммуналдык кызматтар: Utilizes both solar and utility power for charging.
  3. Күн батареялары гана: Charges batteries exclusively from solar energy.

6.3 чыгаруу режимдери

The inverter provides two output modes to cover a wide range of appliance electricity needs:

  1. Күн энергиясынын артыкчылыктуу чыгышы, андан кийин пайдалуулугу: Prioritizes solar power for output, switching to utility power when solar is insufficient.
  2. Solar Priority Output, then Battery, finally Power Supplier (SBU Mode): Prioritizes solar power, then battery power, and finally utility power as a last resort.

6.4 Батареянын шайкештиги

The inverter is compatible with various battery types, including AGM, GEL, FLD, SLD, LI (Lithium Iron Phosphate), and USER-defined settings. Selecting the correct battery type maximizes charging efficiency and extends battery life.

Image showing the inverter compatible with Lead-Acid and Lithium batteries, specifically GEL, AGM, FLD, LI, SLD types.

Figure 8: Battery Compatibility

The inverter can be used without batteries. However, if no battery is connected, the voltage of the solar module should be more than 360 volts DC.

6.5 Dual AC Output Function (MAX-10.2KW)

The primary and secondary AC outputs are normally active. If there is no PV input and no mains supply, and the battery voltage is too low, the primary circuit will switch off, and only the secondary output will remain active to conserve power. The maximum PV array power for PV1 and PV2 channels is 5400W each.

6.6 RGB LCD Display (ECO-6.2KW)

The ECO-6.2KW model features a high-resolution RGB LCD display, providing clear and easy-to-read information even in daylight. It uses RGB sign language for various operating modes.

Image showing the AN-SCI-ECO 6200 inverter with its RGB LCD display and dual AC output feature.

Figure 9: AN-SCI-ECO 6200 with RGB LCD Display

7. Мониторинг

The inverter supports Wi-Fi monitoring, allowing you to control and monitor the system's operation via a cell phone application. The application is available on Google Play and the App Store.

Diagram showing Wi-Fi monitoring capabilities of the inverter, with a Wi-Fi module connected to the inverter, and data displayed on a computer and mobile phone app (available on Google Play and App Store).

Figure 10: Wi-Fi Monitoring Setup

8. Техникалык тейлөө

To ensure optimal performance and longevity of your ANERN Hybrid Solar Inverter, regular maintenance is recommended:

  • Үзгүлтүксүз текшерүү: Мезгил-мезгили менен бардык электр туташууларын бекемдигин жана коррозия белгилерин текшерип туруңуз.
  • Тазалоо: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow and prevent overheating. Use a soft, dry cloth for cleaning the exterior.
  • Экологиялык шарттар: Ensure the inverter is installed in a dry, well-ventilated area, away from direct sunlight, moisture, and corrosive substances.
  • Программалык камсыздоонун жаңыртуулары: Check for any available firmware updates through the Wi-Fi monitoring application to ensure your inverter operates with the latest features and improvements.

9. Кыйынчылыктарды

If you encounter any issues with your ANERN Hybrid Solar Inverter, consider the following basic troubleshooting steps:

  • Эч кандай кубаттуулугу жок: Check all circuit breakers (AC, DC, battery) to ensure they are in the ON position. Verify battery connections and voltage. Check PV input voltage жана байланыштар.
  • Инвертор иштебей жатат: Ensure the power-on sequence (battery, inverter, PV/mains/load switches) is followed correctly.
  • ЖКдагы ката коддору: Refer to the inverter's LCD display for any error codes. Consult the specific error code section in the full product manual (if available) or contact customer support with the error code.
  • Төмөндөтүлгөн аткаруу: Check PV panel cleanliness and shading. Ensure proper ventilation around the inverter. Verify battery health and charge levels.

For complex issues or persistent problems, please contact ANERN customer support.

10. Кепилдик жана колдоо

ANERN products are designed and manufactured to high-quality standards. This inverter is certified with CE and RoHS, ensuring compliance with relevant safety and environmental directives.

For warranty information, technical support, or service inquiries, please contact your point of purchase or visit the official ANERN webсайт. Колдоо кызматына кайрылганда сатып алуу дүмүрчөгүңүздү жана продуктунун сериялык номерин жаныңызда кармаңыз.

Тектеш документтер - AN-SCI-MAX-10200, AN-SCI-ECO-6200

Preview ANERN FGI-S12000 Hybrid Solar Inverter User Manual
User manual for the ANERN FGI-S12000 Hybrid Solar Inverter. This guide details the installation, operation, safety, and specifications of the 12KW solar energy storage system, featuring MPPT charge control and UPS functionality.
Preview AN-SCI-EVO-2000 & AN-SCI-EVO-3200 инвертор колдонуучу колдонмосу
Anern AN-SCI-EVO-2000 жана AN-SCI-EVO-3200 Pure Sine Wave Күн гибриддик инверторлору үчүн комплекстүү колдонуучу колдонмо. Орнотуу, эксплуатациялоо, спецификациялар жана бузулууларды оңдоону камтыйт.
Preview Anern AN-SCI-EVO сериясындагы гибриддик инвертордун колдонуучу колдонмосу
Anern AN-SCI-EVO сериясындагы гибриддик инверторлор үчүн колдонуучу колдонмосу, анын ичинде AN-SCI-EVO-4200 жана AN-SCI-EVO-6200 моделдери. Үй жана кеңсе шаймандарын кубаттоо үчүн орнотуу, иштетүү жана мүнөздөмөлөр жөнүндө маалымат берет.
Preview Посібник користувача гибридного инвертора Anern AN-SCI-EVO
Anern AN-SCI-EVO сериї 3600, 4200 та 6200. Детальный опис встановлення, эксплуатації та усунення несправностей үчүн вертикальных инверторыв бридних инверторыв.
Preview Посібник користувача Anern AN-SCI-EVO-2000 / AN-SCI-EVO-3200: Инвертор / MPPT SCC / AC Зарядний пристрий
Анерн AN-SCI-EVO-2000 жана AN-SCI-EVO-3200 үчүн детальний посибник користувача. Охоплює встановлення, эксплуатацію, техничны характеристика та усунення несправностей үчүн цих бридних сонячних инверторыв.
Preview ANERN AN-SCI-EVO-3600/6200 гибриддик инвертор колдонуучусунун колдонмосу
ANERN AN-SCI-EVO-3600 жана AN-SCI-EVO-6200 гибриддик күн инверторлору үчүн орнотууну, иштетүүнү, мүнөздөмөлөрдү, бузулууларды оңдоону жана техникалык тейлөөнү камтыган кеңири колдонуучу колдонмосу.