1. Киришүү
This manual provides detailed instructions for the setup, operation, and maintenance of your Scimagic-RC ERREKA KUMA KU02 compatible remote control. This device is designed for cloning existing 433.92MHz fixed code remote controls for garage doors, gates, and other access systems. Please read this manual carefully before use.
2. Пакеттин мазмуну
Пакетти ачканда, төмөнкү нерселердин бардыгы бар экенин текшериңиз:
- 1 x Remote Control (SMG-002)
- 1 x Англис колдонуучу колдонмо
- 1 x 12V 27A Battery (pre-installed)
- 1 х брелок
3. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд аты | Scimagic-RC |
| Модель номери | ERREKA KUMA KU02 (SMG-002) |
| Коддоо ыкмасы | Fixed Code (Clone) |
| Жыштык | 433.92 МГц |
| баскычтардын саны | 4 (A, B, C, D) |
| Электр камсыздоо | 12V 27A Батарея |
| Иштөө диапазону | 10-50 метр (ачык аянт) |
| Өлчөмдөр | 5.4cm x 3.0cm x 1.4cm |
| Салмагы | 0.05 кг |
| Сертификация | CE |
| Origin | Материк Кытай |
Маанилүү эскертүү: Бул алыстан башкаруу болуп саналат not compatible with rolling code systems. It is designed for fixed code cloning only.
4. Орнотуу жана программалоо
The SMG-002 remote control uses a face-to-face cloning method. Follow these steps carefully to program your new remote:
1-кадам: Тарых кодун дубликатордон тазалаңыз
- Press and hold buttons A and B simultaneously on the new remote control until the LED flashes three times.
- While still holding button A, release button B. Then, press button B slowly three times. The LED will flash three times again.
- Release button A. The history code is now cleared.
Step 2: Copy Code from the Original Transmitter
- Place the new remote control (duplicator) and your original remote control side-by-side, as close as possible.
- Press and hold button A on your original transmitter. Simultaneously, press and hold button A on the new remote control until its LED flashes.
- Эки баскычты бошотуңуз. А баскычынын коду азыр көчүрүлдү.
- Repeat the process for other buttons (B, C, D) if desired, using the corresponding buttons on both the original and new remotes.
Баскыч функциялары:
- Баскыч А: Кулпу функциясы
- B баскычы: Кулпуну ачуу функциясы
5. Иштөө нускамалары
After successful programming, your new remote control is ready for use. Simply press the corresponding button (A, B, C, or D) to activate the programmed function (e.g., open/close garage door, open/close gate).
6. Техникалык тейлөө
Батареяны алмаштыруу
The remote control uses a 12V 27A battery. When the remote's range decreases significantly or the LED indicator becomes dim, it's time to replace the battery. To replace:
- Алыстан башкаруу пультун c этияттык менен ачыңызasing (usually by unscrewing small screws on the back or prying gently along the seam).
- Эски 12V 27A батареясын алып салыңыз.
- Insert a new 12V 27A battery, ensuring correct polarity.
- в жабууasing коопсуз.
Тазалоо
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
7. Кыйынчылыктарды
- Remote not responding after programming: Ensure the original remote uses a fixed code and operates at 433.92MHz. This duplicator is not compatible with rolling code systems.
- LED does not flash during programming: Make sure you are pressing the buttons correctly and continuously as described in the programming steps. The battery might also be low; try replacing it.
- Cloning fails repeatedly: Try clearing the history code again (Step 1) and then repeat the cloning process (Step 2). Ensure the original and new remotes are as close as possible during cloning. Sometimes, adjusting the angle or distance slightly can help.
- Кыскартылган иштөө диапазону: This typically indicates a low battery. Replace the 12V 27A battery.
8. Колдонуучунун кеңештери
- Always perform the cloning process in a quiet environment to minimize potential signal interference.
- If you have multiple fixed code remotes to clone, it's often best to clear the duplicator's history before cloning each new original remote.
- Keep your original remote control in a safe place.
9. Кепилдик жана колдоо
This product comes with a 1-year warranty from the store. For detailed instructions or further assistance, you may refer to the User Manual PDF available at https://manuals.plus/m/cb83f0d650c550b5a78a3187192f017a3595d07dc48ad4f17849bb32711c3f93.
Өндүрүүчү: Shenzhen Scimagic Development Technology Co.Ltd
Дарек: Honghai Gebu Building 2301, Baoan Road, Songgang Baoan District Shenzhen Guangdong China.
