1. Продукт бүтүп калдыview
This portable LED work light adapter is designed to convert your Erbauer 18V/20V EXT Lithium-ion battery into a convenient, cordless light source. It features an E27 bulb socket, allowing for the installation of standard E27 LED bulbs, and an integrated on/off switch for easy operation. This product is ideal for various indoor applications where portable lighting is needed.
2. Коопсуздук маалыматы
- Оптималдуу иштеши үчүн колдонуудан мурун батареянын толук заряддалганын текшериңиз.
- Аппаратты сууга же ашыкча нымдуулукка дуушар кылбаңыз.
- Use only compatible Erbauer 18V/20V EXT Lithium-ion batteries.
- Адаптерди бөлүктөргө бөлүүгө же өзгөртүүгө аракет кылбаңыз.
- Always turn off the light using the switch before removing the bulb or battery.
3. Орнотуу
- E27 лампочкасын орнотуу: Carefully screw an E27 LED bulb (not included) into the lamp holder socket until it is secure. Ensure the bulb is rated for appropriate voltage (14.4V-21V compatible bulbs are suitable).
- Батареяны тиркөө: Slide your compatible Erbauer 18V/20V EXT Lithium-ion battery (e.g., EBAT18-Li-5, EBAT18-Li-4, EBAT18-Li-2) onto the adapter until it clicks into place. Ensure a firm connection.
4. Иштөө нускамалары
- Once the bulb and battery are securely attached, locate the ON/OFF switch on the side of the adapter.
- Flip the switch to the 'ON' position to illuminate the bulb.
- To turn off the light, flip the switch back to the 'OFF' position.
- When not in use, it is recommended to remove the battery from the adapter to prevent accidental discharge.
Video demonstrating the assembly and operation of the LED work light.
5. Техникалык тейлөө
- Тазалоо: Адаптерди кургак, жумшак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Лампаны алмаштыруу: Ensure the adapter is turned off and the battery is removed before replacing the E27 bulb. Allow the bulb to cool down if it has been in use.
- Сактагыч: Store the adapter in a dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
6. Кыйынчылыктарды
- Жарык күйбөйт:
- Check if the battery is properly attached and charged.
- Ensure the E27 bulb is securely screwed into the socket and is not faulty.
- ON/OFF которгучу 'ON' абалында экенин текшериңиз.
- Жарык жымыңдайт:
- Check the battery charge level; a low battery can cause flickering.
- Ensure the bulb is fully screwed in and making good contact.
- Try a different E27 bulb to rule out a faulty bulb.
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Элемент түрү | LED Work Light Adapter |
| Lumen (typical bulb) | 500LM |
| Rated Power (typical bulb) | 5W |
| Түс температурасы | 6000K (муздак ак) |
| Которуу | 1x control LED on/off |
| Материал | 3D басып чыгаруу |
| Бири -бирине шайкеш батареялар | Erbauer 18V Lithium-ion Batteries (EBAT18-Li-5, EBAT18-Li-4, EBAT18-Li-2) |
| Туура келген Лamp Тtage | 14.4V-21V |
| Пакет узундугу | 15 см |
| Пакет туурасы | 10 см |
| топтом Бийиктиги | 5 см |
| Пакет Салмагы | 0.13 кг |
8. Колдонуучунун кеңештери
- For maximum brightness and runtime, use a fully charged, high-capacity Erbauer 18V/20V EXT Lithium-ion battery.
- Consider using an LED bulb with a wide beam angle for general area lighting, or a narrower beam for more focused illumination.
- Always ensure the bulb is rated for the appropriate voltage range (14.4V-21V) to prevent damage to the bulb or adapter.
9. Кепилдик жана колдоо
For any questions, technical assistance, or support regarding this product, please contact the seller directly through the platform where the purchase was made. Please provide your order details when contacting support.
