1. Продукт бүтүп калдыview
This manual provides instructions for the original speed control handle with key style, designed as a replacement part for INMOTION P1, P1F, and P2 electric bicycles. It integrates speed control (throttle), an ignition switch with a key, and a wiring harness for connection to your e-bike's system.
Figure 1: ашыкview of the Speed Control Handle with Keys and Wiring
Video 1: Product showcase of the speed control handle.
2. Коопсуздук маалыматы
⚠ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage of your electric bicycle's battery. Improper handling can lead to serious injury or damage.
Always ensure the electric bicycle is powered off and the battery is disconnected before performing any installation or maintenance.
3. Орнотуу жана орнотуу
This speed control handle is designed for replacement on INMOTION P1, P1F, and P2 electric bicycles. Professional installation is recommended if you are unfamiliar with e-bike wiring.
3.1 Компоненттер
- Speed Control Handle with integrated ignition switch
- Эки ачкыч
- Wiring harness with a 6-pin connector (5 wires connected)
3.2 Орнотуу кадамдары
Даярдоо: Ensure your electric bicycle is turned off and the battery is safely disconnected to prevent electrical shock or damage.
Эски тутканы алып салуу: Carefully remove the existing speed control handle from your e-bike's handlebar. This may involve unscrewing clamps and disconnecting the wiring harness.
Mount New Handle: Slide the new speed control handle onto the handlebar. Position it comfortably and securely tighten the clamp. Ensure the handle does not interfere with braking or other controls.
2-сүрөт: астыңкы жагы view showing the handlebar clamp and 'KH-DX 36V' label.
Зымдарды туташтыруу: Locate the corresponding wiring harness on your electric bicycle. Connect the 6-pin connector from the new speed control handle to the e-bike's wiring. The connector has 5 active wires (red, yellow, blue, green, black) and one empty slot. Ensure the connection is firm and correctly aligned.
Figure 3: Close-up of the 6-pin wiring connector with 5 colored wires.
Note on Wiring: Some users have noted a discrepancy where their original unit might have 6 active wires while this replacement has 5. It is crucial to verify the wiring configuration of your specific INMOTION P1, P1F, or P2 model and ensure compatibility. If your original unit has a different number of wires or a different pinout, consult a qualified technician or the e-bike manufacturer's wiring diagram before proceeding to avoid damage.
Коопсуз зымдар: Route and secure the wiring harness to prevent it from snagging or being damaged during operation.
Сыноо функциясы: Reconnect the e-bike battery. Insert the key into the ignition, turn it to the 'ON' position, and test the throttle response and power indicator (if present). Ensure all functions operate correctly before riding.
4. Иштөө нускамалары
4.1 Күйгүзүү/өчүрүү
- Insert one of the provided keys into the ignition switch located on the speed control handle.
- Turn the key clockwise to the 'ON' position to power on your electric bicycle.
- Turn the key counter-clockwise to the 'OFF' position to power off the electric bicycle and remove the key for security.
4.2 Speed Control (Throttle)
- Once the e-bike is powered on, gently twist the handle grip (throttle) towards you to engage the motor and accelerate.
- Release the throttle to reduce speed or stop.
- Always operate the throttle smoothly and be aware of your surroundings.
5. Техникалык тейлөө
Тазалоо: Regularly wipe down the speed control handle with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the plastic or electronic components.
Зымдарды текшерүү: Periodically check the wiring harness and connector for any signs of wear, fraying, or loose connections. Ensure all connections are secure.
Негизги кам көрүү: Keep the keys safe and avoid bending or damaging them. It is advisable to keep one key as a spare.
Рутка Clamp: рулду камсыз кылуу clamp remains tight. If it loosens, carefully re-tighten it to prevent the handle from rotating during use.
6. Кыйынчылыктарды
6.1 No Power When Key is Turned
Check Key Position: Ensure the key is fully inserted and turned to the 'ON' position.
Check E-bike Battery: Verify that your electric bicycle's battery is charged and properly connected.
Зымдарды текшерүү: Disconnect the e-bike battery, then check the wiring harness connection to the speed control handle. Ensure it is securely plugged in and there are no visible damages to the wires.
6.2 Throttle Unresponsive
Күйгүзүү: Confirm the e-bike is powered on via the ignition key.
Зымдар: Check the wiring connection as described above. A loose or damaged wire in the throttle circuit can prevent it from functioning.
Физикалык тоскоолдук: Ensure there is no physical obstruction preventing the throttle from twisting freely.
6.3 Wiring Discrepancy (e.g., 6 vs 5 wires)
If your original speed control handle had a different number of wires than this replacement (e.g., 6 wires on original vs. 5 on replacement), it is critical to ensure compatibility. Refer to the wiring diagram of your specific INMOTION P1, P1F, or P2 model. Incorrect wiring can lead to malfunction or damage. If unsure, seek professional assistance.
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Продукт түрү | Speed Control Handle with Key Style |
| Шайкештик | INMOTION P1, P1F, P2 Electric Bicycles |
| Тtage | 36V (KH-DX 36V model) |
| Туташтыргыч түрү | 6-pin (5 wires connected) |
| Origin | Материк Кытай |
| Пакеттин өлчөмдөрү (L x W x Y) | 13 см х 9 см х 9 см |
| Пакет Салмагы | 0.25 кг |
8. Колдонуучунун кеңештери
Зымдарды текшерүү: Before installation, always compare the wiring of your original handle with the replacement. Pay close attention to the number and color of wires to ensure proper function and prevent electrical issues.
Коопсуз орнотуу: A loose handle can be dangerous. Ensure the clamp is securely fastened to the handlebar, but do not overtighten to avoid damaging the handle or handlebar.
Негизги башкаруу: Keep your spare key in a safe, accessible place. Avoid leaving keys in the ignition when the e-bike is unattended.
9. Кепилдик жана колдоо
For specific warranty information regarding this speed control handle, please refer to the original purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.
If you encounter issues that cannot be resolved using the troubleshooting guide, please contact the seller or a certified electric bicycle repair technician for assistance.
