1. Introduction and Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your Denso Auto Waterproof Wire Connectors. These connectors are designed for reliable electrical connections in automotive, truck, and other sealed applications, offering protection against water and dust ingress. They are available in various pin configurations from 1-pin to 16-pin to suit diverse wiring needs.
2. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | Connector Series |
| Тtage Рейтинг | 415 V |
| Сертификация | CE |
| Origin | Материк Кытай |
| Пакет Салмагы | 0.01 кг |
| Пакеттин өлчөмдөрү (L x W x Y) | 10 см х 10 см х 10 см |
Dimensional Specifications by Pin Configuration
| Пин түрү | Male (L/mm, W/mm, H/mm) | Female (L/mm, W/mm, H/mm) | ||||
|---|---|---|---|---|---|---|
| 1P (DJ7011Y-1.8) | 32.5 | 13.4 | 12.8 | 27.3 | 21.7 | 15.6 |
| 2P (DJ70216Y-1.8) | 32.7 | 18.3 | 14.1 | 27.7 | 20.5 | 22.8 |
| 3P (DJ70316Y-1.8) | 32.9 | 23.5 | 13.4 | 27.4 | 25.5 | 22.5 |
| 4P (DJ70416Y-1.8) | 35.4 | 18.3 | 20.4 | 27.3 | 20.4 | 29.6 |
| 6P (DJ70616Y-1.8) | 35.8 | 23 | 20.2 | 28 | 25 | 30.3 |
| 8P (DJ70816Y-1.8) | 36.4 | 28 | 26.6 | 27.3 | 30.6 | 33 |
| 10P (DJ71016Y-1.8) | 36 | 32.2 | 26 | 27.4 | 35.5 | 32.6 |
| 12P (DJ71216Y-1.8) | 35.8 | 37.4 | 22.6 | 27.4 | 40.5 | 32.8 |
| 16P (DJ71616Y-1.8) | 36 | 41 | 30 | 32 | 44 | 26 |
3. Пакеттин мазмуну
Each set of Denso Auto Waterproof Wire Connectors typically includes:
- Male Connector Housing
- Female Connector Housing
- Corresponding Male Terminals
- Corresponding Female Terminals
- Rubber Seals (for terminals and housing)
4. Орнотуу жана орнотуу
Proper installation is crucial for ensuring the waterproof integrity and electrical performance of these connectors. Follow these general steps:
- Зымдарды даярдоо: Strip approximately 3-5mm of insulation from the end of each wire. Ensure the wire gauge is appropriate for the terminals provided.
- Кысуучу терминалдар: Slide a rubber seal onto each stripped wire. Using a suitable crimping tool, securely crimp the male terminals onto the male wires and the female terminals onto the female wires. Ensure a strong mechanical and electrical connection. The rubber seal should be positioned correctly to provide a watertight seal around the wire insulation.
- Терминалдарды корпуска киргизүү: Carefully insert the crimped terminals into the corresponding male or female connector housing. Listen for a click, indicating the terminal is locked in place. Ensure the terminals are inserted in the correct orientation and pinout sequence for your application.
- Verify Sealing: Once all terminals are inserted, ensure the rubber seals are properly seated within the connector housing to prevent moisture ingress.
- Connect Connectors: Align the male and female connector housings and push them firmly together until they latch securely.
Always double-check your wiring diagram and connections before applying power.
5. Иштөө нускамалары
Once properly installed, these connectors function as passive electrical interfaces. Ensure the connectors are fully mated and latched to maintain their waterproof and secure connection. Avoid pulling on the wires directly to disconnect; always grasp the connector housings firmly.
6. Техникалык тейлөө
These connectors are designed for durability and minimal maintenance. However, periodic inspection is recommended, especially in harsh environments:
- Визуалдык текшерүү: Check for any signs of physical damage, cracks, or discoloration on the connector housings.
- Мөөрдүн бүтүндүгү: Ensure the rubber seals are still intact and properly seated. Replace any damaged or missing seals.
- Туташуу коопсуздугу: Verify that the connectors remain securely latched.
- Тазалоо: If exposed to dirt or debris, gently clean the exterior of the connectors with a damp cloth. Avoid using harsh chemicals that could degrade the plastic or rubber materials.
7. Кыйынчылыктарды
Most issues with electrical connectors stem from improper installation. Here are some common problems and their solutions:
- Электр туташуусу жок:
- Check if terminals are fully crimped and inserted correctly into the housing.
- Ensure the male and female connectors are fully mated and latched.
- Verify continuity of wires and terminals using a multimeter.
- Water or Moisture Ingress:
- Ensure all rubber seals are present, undamaged, and correctly seated around the wires and within the connector housing.
- Confirm the connector housings are fully latched, creating a tight seal.
- Бошоң байланыш:
- Inspect terminals for proper crimp and ensure they are securely locked into the housing.
- Check for any deformation in the connector pins or sockets.
8. Колдонуучунун кеңештери
- Amperage рейтинги: While a general voltage rating of 415V is provided, the actual amperage capacity depends heavily on the wire gauge used with the terminals. Always match your wire gauge to the current requirements of your circuit and ensure the terminals are rated for that current. Consult a wire gauge chart for appropriate current handling.
- Кысуучу курал: Using a high-quality, dedicated crimping tool for automotive terminals will significantly improve the reliability and longevity of your connections.
- Сыноо байланыштары: After assembly, always test your connections for continuity and proper function before final deployment.
9. Кепилдик жана колдоо
For any questions regarding the product, technical support, or warranty claims, please contact the seller directly through your purchase platform. Ensure you have your order details available for faster assistance.
