1. Киришүү
This manual provides essential information for the proper installation, function, and care of your new original water tank sensor. This sensor is a critical component for the mopping function of your Xiaomi Mi Robot Vacuum Mop 2 or Mijia Sweeping Vacuum Cleaner 2C, ensuring accurate water level detection and efficient operation.
Figure 1: Water Tank Sensor
2. Коопсуздук маалыматы
- Always disconnect the robot vacuum from its power source before performing any maintenance or part replacement.
- Статикалык электр энергиясынан зыян келтирбөө үчүн электрондук компоненттерди этияттык менен кармаңыз.
- If you are unsure about any step, consult a qualified technician or the robot vacuum's main service manual.
3. Орнотуу жана орнотуу
This water tank sensor is a replacement part. Installation requires accessing the internal components of your robot vacuum. Please follow these general steps, referring to your robot vacuum's specific disassembly instructions if available.
- Өчүрүү: Ensure the robot vacuum is turned off and disconnected from its charging dock and any power source.
- Мүмкүнчүлүк: Carefully disassemble the robot vacuum to gain access to the water tank sensor location. This typically involves removing the main brush, side brush, dustbin, water tank, and potentially the top cover and internal panels.
- Эски сенсорду табыңыз: Identify the existing water tank sensor. It is usually a small circuit board with wires connected to a connector.
- Эски сенсорду ажыратыңыз: Gently disconnect the wiring harness from the old sensor. Note the orientation of the connector.
- Эски сенсорду алып салуу: Carefully remove the old sensor from its mounting position.
- Жаңы сенсорду орнотуу: Place the new water tank sensor into the mounting position.
- Жаңы сенсорду туташтырыңыз: Connect the wiring harness to the new sensor, ensuring it is securely seated and in the correct orientation.
- Кайра чогултуу: Carefully reassemble the robot vacuum, ensuring all components are correctly placed and secured.
- Сыноо: Place the robot on its charging dock and power it on. Fill the water tank and initiate a mopping cycle to verify proper sensor function.
2-сүрөт: Жалпысынан view of the water tank sensor with its wiring.
Figure 3: Detail of the sensor's electrical connector.
Сүрөт 4: Жакын пландан view of the sensor board.
5-сүрөт: Арткы view of the sensor board, showing model/version markings (HALL-WATER_V1_0).
4. Иштөө принциптери
The water tank sensor is a Hall effect sensor designed to detect the presence or absence of water in the robot vacuum's water tank. It works by sensing changes in a magnetic field, which are influenced by the water level. When the water level drops below a certain point, the sensor signals the robot's main control unit, which can then trigger alerts or adjust mopping operations.
5. Техникалык тейлөө
To ensure the longevity and accurate function of your water tank sensor:
- Үзгүлтүксүз текшерүү: Periodically inspect the sensor area for any debris, dust, or water residue that might interfere with its operation.
- Тазалоо: If necessary, gently clean the sensor and its immediate surroundings with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
- Суунун сапаты: Using clean, filtered water in the tank can help prevent mineral buildup that might affect sensor performance over time.
6. Кыйынчылыктарды
If you experience issues with your water tank sensor after replacement, consider the following:
- No Water Detected / Mop Not Working:
- Ensure the water tank is properly filled and inserted.
- Check the sensor's wiring connection to ensure it is secure and correctly oriented.
- Inspect the sensor for any visible damage or obstructions.
- Constant Water Detected (even when empty):
- Verify that the sensor area is completely dry and free of moisture.
- Recheck the wiring connection.
- Ката билдирүүлөрү: If the robot displays specific error codes related to the water tank or mopping function, consult your robot vacuum's main user manual for their meaning and recommended actions.
If troubleshooting steps do not resolve the issue, the sensor may be faulty, or there might be an issue with the robot vacuum's main control board. Contact customer support for further assistance.
7. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Продукт түрү | Water Tank Sensor (Vacuum Cleaner Part) |
| Model Number (Sensor) | HALL-WATER_V1_0 (20201126) |
| Шайкештик | Xiaomi Mi Robot Vacuum Mop 2 (STYTJ03ZHM), Mijia Sweeping Vacuum Cleaner 2C |
| Аныктык | Original |
| Материал | Plastic, Electronic Components |
| Түс | Кара |
| Шарт | Жаңы |
Note: Product color may vary slightly due to photographic lighting sources or your monitor settings. Measurements may have a slight error margin of +/- 1-3 cm.
8. Колдонуучунун кеңештери
Re'ден колдонуучунун конкреттүү кеңештери жокviews or Q&A were available for this product. However, general advice for replacement parts includes:
- Сатып алуудан мурунasing, verify the compatibility of the sensor with your specific robot vacuum model number.
- Кайра чогултууга жардам берүү үчүн демонтаж учурунда сүрөткө тартыңыз.
- Keep small screws and parts organized during the replacement process.
9. Кепилдик жана колдоо
For information regarding warranty coverage, returns, or technical support, please refer to the seller's policies or contact the seller directly. Keep your purchase receipt as proof of purchase.
