Anern 10.2KW Hybrid Inverter User Manual

1. Киришүү жана коопсуздук маалыматы

This manual provides essential information for the safe and efficient operation of your Anern 10.2KW Hybrid Inverter. Please read it thoroughly before installation and use.

Маанилүү коопсуздук эскертүүсү:

• The starting power of inductive load electrical appliances should be at least three times the rated power of the appliances. Exceeding the inverter's power capacity can cause damage. Select a suitable model before purchase.
• Connect the circuit correctly according to these instructions and install switches for each circuit.
• Always find a qualified electrician to install the inverter. Installing it yourself can cause danger or damage to the equipment.

2. Продукт бүтүп калдыview

The Anern 10.2KW Hybrid Inverter is a pure sine wave solar inverter designed for both off-grid and on-grid applications. It features a built-in 160A MPPT solar controller and supports various battery types.

Figure 2.1: Anern 10.2KW Hybrid Inverter with key specifications (160A Max Charging Current, 2/18A MPPT Trackers/Max Input Current, 500 VDC Max. PV Array Voltage)

Продукт компоненттери:

Figure 2.2: Inverter front and rear panel overview

Негизги өзгөчөлүктөрү:

• Pure Sine Wave Solar Hybrid Inverter.
• Capable of running without a battery (solar panel voltage must exceed 360 VDC).
• One-key restoring to factory default settings.
• PV automatically activates lithium batteries.
• Орнотулган 160A MPPT күн энергиясын башкаруучу.
• Max 8200W & 10800W solar input power respectively (depending on model variant).
• Wide PV кириш томtage диапазону (90-450VDC).
• Катаал чөйрөлөр үчүн орнотулган чаңга каршы комплект.
• Smart battery charge design to maximize battery lifespan.
• Dual PV Input & Dual AC output.
• WIFI available for iOS and Android systems for monitoring.

3. Техникалык шарттар

Сүрөт 3.1: Продукциянын өлчөмдөрү

4. Орнотуу & Орнотуу

Орнотуу тартиби:

1. Батарея которгучту күйгүзүңүз.
2. Инверторду иштетиңиз.
3. Turn on the PV, mains, and load switches.

Өчүрүү ырааттуулугу:

1. Turn off the switches of load, PV, and mains.
2. Инверторду өчүрүңүз.
3. Finally, turn off the battery.

Зымдар диаграммасы:

4.1-сүрөт: Системанын зымдарынын схемасы

Батарея шайкештиги:

The inverter supports Lead-Acid batteries (GEL, AGM, FLD, SLD) and Lithium batteries. It can also be used without batteries, provided the solar panel voltage 360 VDC ашат.

4.2-сүрөт: Колдоого алынган батареянын түрлөрү

• The inverter can be used without batteries.
• It can only be connected to PACE BMS, not to BMS from other manufacturers.
• The inverter cannot communicate with other battery brands.
• If you are using a lithium battery, please connect it by clicking on the 'User-defined' battery type in program 05.

5. Иштөө режимдери

Заряддоо режимдери:

The inverter offers three distinct charging modes to meet various application requirements:

Figure 5.1: Three Charging Modes

• Күн биринчи: Prioritizes solar energy for charging and powering loads.
• Solar and Utility at the same time: Utilizes both solar and grid power concurrently.
• Күн энергиясы гана: Exclusively uses solar power.

Dual AC Output Distribution:

The primary and secondary AC outputs can be used simultaneously under normal conditions.

Figure 5.2: AC Dual Output Configuration

• The combined load of the primary output + secondary output must not exceed 10.2KW.
• If power is supplied only in battery mode, the primary output is not affected.
• When powered by battery mode only, the secondary output cannot exceed 3400W (total primary + secondary still cannot exceed 10.2KW).
• If there is no utility power, no PV input, and the battery voltage drops below 44V, the main circuit will be directly closed. The secondary circuit will remain open until the battery reaches its discharge protection voltage. In this scenario, the secondary output will be retained at 3400W.

RGB Working Mode Indicators:

The inverter features RGB lights that automatically switch colors based on the working mode (off-grid, hybrid, or on-grid).

Figure 5.3: RGB Working Mode Indicators

6. Мониторинг

Wi-Fi мониторинги:

The inverter supports Wi-Fi and GPRS monitoring, allowing you to control and monitor the system via a mobile application available for both iOS and Android devices.

Figure 6.1: Wi-Fi Monitoring Setup

7. Техникалык тейлөө

Removable Dust Net:

The inverter is equipped with a removable dust shield. This feature effectively prevents short circuits inside the machine caused by dust and makes cleaning easier, ensuring optimal performance and longevity.

Intelligent Cooling Fans:

The inverter includes three intelligent cooling fans for better heat dissipation, preventing overheating and maintaining stable operation.

Figure 7.1: Dust Net and Cooling Fans

8. Кыйынчылыктарды

Жалпы суроолор жана жооптор:

• Q: What is the maximum PV power input this inverter can take?
  A: For the SCI-MAX-10.2KW model, the maximum PV array power is 5400W per channel for PV1 and PV2, totaling 10800W. For the SCI-MAX-8.2KW model, it is 8200W.
• Q: Does it support lithium batteries?
  A: Yes, it supports lithium batteries. When using lithium batteries, select the 'User-defined' battery type in program 05. Note that it is designed to connect with PACE BMS and may not communicate with other battery brands.
• Q: What is the maximum charging current when connected to national grid power?
  A: The maximum AC charging current is 140Amp. The maximum charging current (AC charger plus solar charger) is 160Amp.
• Q: Why are there two MPPT controllers?
  A: The dual MPPT controllers (PV1 and PV2) allow for two independent solar panel inputs, each with its own maximum power point tracking. This provides greater flexibility in system design and improved stability, as damage to one MPPT does not affect the other.
• Q: Is this model on-grid? Does it have a function to feed into the grid?
  A: Yes, it is a hybrid inverter that can be both off-grid and on-grid connected. Whether it can sell electricity back to the grid depends on local government policy. Please note that Anern solar inverters do not have VDE certification, which may affect on-grid connection in some countries.
• С: Киргизилген том деген эмнеtage range for each string?
  A: The PV Array MPPT Voltage Range is 90-450VDC, with a maximum PV Array Open Circuit Voltage of 500Vdc.

9. Колдонуучунун кеңештери

• For optimal performance and safety, always ensure professional installation by a qualified electrician.
• Regularly check the removable dust net and clean it to prevent dust accumulation, which can lead to short circuits and reduced efficiency.
• Utilize the Wi-Fi monitoring feature to keep track of your system's performance and adjust settings as needed from your mobile device.
• When operating without batteries, ensure your solar panel array consistently provides voltage above 360 VDC for stable operation.

10. Сертификаттар

The Anern Hybrid Inverter is CE certified, ensuring compliance with European safety, health, and environmental protection requirements.

Сүрөт 10.1: Продукциянын сертификаттары

11. Продукт видеосу бүттүview

Watch this video for a visual guide to the Anern Hybrid Inverter, including unboxing and a detailed look at its features and connections.

12. Кепилдик жана колдоо

For any questions or support needs, please contact Anern Solar Store customer service. Provide relevant details such as product model and a description of the issue for faster processing.

Anern products are 100% original. We are committed to providing good service and satisfactory solutions to our customers.