Japan Nidec 24H Brushless Servo Motor User Manual

1. Киришүү

This manual provides essential information for the safe and effective use of your Japan Nidec 24H Brushless Servo Motor. This motor features a built-in drive and 100-line dual-channel encoder, making it suitable for high-precision control applications. Please read this manual thoroughly before operation.

2. Safety & Warnings

Do not operate the motor under overload (stall) conditions, as this may easily damage the motor.
Select a power supply with appropriate voltage (DC).
If the load exceeds the rated value, the rotational speed will decrease.
Operating near the stall torque limit may cause internal damage.
Reducing the rotational speed will result in decreased output torque.
It is strictly forbidden to make mistakes regarding the positive and negative connections of the brushless motor.
Always use a regulated, non-surge DC power supply (e.g., a battery or regulated power supply).

Мункунуп калуу коркунучу жөнүндө эскертүү

This product may contain small parts. Keep out of reach of children under 3 years to prevent choking hazards.

3. Продукт бүтүп калдыview

The Nidec 24H Brushless Servo Motor is a compact and powerful motor designed for precision applications. It features an integrated brushless driver and a 100-line encoder for accurate feedback and control.

Nidec Brushless Servo Motor front view — Фронт view of the Nidec Brushless Servo Motor.

Төмөнкү view showing built-in brushless driver and voltage диапазону — Төмөнкү view showing the built-in brushless driver. Operating voltagдиапазону 12V-24V.

Motor in hand with Chinese text indicating features — The motor supports forward/reverse operation, PWM speed regulation, and includes an AB signal encoder.

4. Техникалык шарттар

Жалпы касиеттери

Түрү: Микро мотор
Commutation: Brushless
Келип чыгышы: Материк Кытай
Тастыктоо: CCC
Шарты: Used (dismantled, tested and in perfect working order)

Электрдик маалыматтар

Тtage	Жүктөө жок	Жүк жок ылдамдык
DC 9V	70мА	2246 RPM
DC 12V	80мА	3020 RPM
DC 24V	100мА	6100 RPM

Өлчөмдөр

Motor dimensions including shaft and body — Key dimensions: Shaft diameter (Φ6mm), Shaft length (18.5mm), Motor body diameter (42mm), Motor body length (34mm).

Жогорку view showing mounting screw holes — Жогорку view showing 3mm mounting screw holes with 30mm spacing.

Жогорку view showing mounting holes — Жогорку view showing 4mm mounting holes with 52mm spacing.

Пакет маалыматы

Салмагы: 0.15 кг
Өлчөмдөрү (L x W x Y): 9 см х 9 см х 9 см

5. Орнотуу

Wiring Instructions

Refer to the wiring diagram below for proper connections. Ensure all connections are secure before applying power.

Detailed wiring diagram for the Nidec Brushless Servo Motor — **Зымдар диаграммасы:**
**Кызыл зым:** Электр кубаты оң
**Кара зым:** Электр энергиясы терс
**Сары зым:** Start/Stop (Connect to positive power supply via a 1k resistor; below 12V, no resistor needed)
**White Wire (PWM):** PWM signal speed control (Connect to negative for high speed; input 20KHz pulse width signal for speed regulation)
**Жашыл зым:** Forward-reverse switching (Connect to negative to switch direction)
**Brown Wires (Signal A, Signal B):** Кодер сигналдары
**Кызгылт сары зым:** Encoder power supply 5V

Монтаждоо

The motor bracket can be removed if necessary for custom mounting solutions.

Motor with removable bracket — The motor bracket can be detached for flexible installation.

6. Иштөө нускамалары

Негизги операция

Connect the red wire to the positive pole and the black wire to the negative pole of your DC power supply.
Connect the yellow 'Start' line to the positive power supply via a 1k resistor. If operating below 12V, a resistor is not required.
To run at high speed, connect the white PWM line directly to the negative pole.
For speed regulation, input a 20KHz pulse width modulation (PWM) signal to the white line.
To switch between forward and reverse rotation, connect the green line to the negative pole. It is recommended to stop the motor before switching direction to prevent instantaneous surges.
The encoder requires a 5V power supply connected to the orange wire. If the encoder is not needed, this connection can be ignored.

7. Техникалык тейлөө

This brushless servo motor is designed for low maintenance. Keep the motor clean and free from dust and debris. Ensure proper ventilation to prevent overheating. No specific user-serviceable parts are inside.

8. Кыйынчылыктарды

Motor not starting or erratic operation: Check all wiring connections for correctness, especially positive/negative polarity. Ensure the power supply is regulated and within the specified voltage диапазону (9V-24V DC).
Мотордун ысып кетиши: Reduce the load on the motor. Ensure it is not operating under stall conditions. Verify that the power supply voltage is correct and not exceeding 24V.
Reduced speed or torque: The load might be exceeding the motor's rated value. Reduce the load or ensure the motor is not operating near its stall torque limit.
No encoder feedback: Ensure the encoder's 5V power supply (orange wire) is correctly connected.

9. Колдонуучунун кеңештери

Кабелдер: This motor is typically sold without connecting cables. You will need to source appropriate wires and connectors for your application.
Валдын өлчөмдөрү: For precise integration, carefully measure the helical portion of the shaft if specific dimensions are critical for your project. The shaft diameter is 6mm and length is 18.5mm.
Шарты: As these motors are often used and dismantled, minor cosmetic imperfections like oxidation or rust spots may be present, but they are tested for perfect working order.

10. Кепилдик жана колдоо

For detailed information regarding the manufacturer and EU representative, please refer to the original user manual PDF.

Өндүрүүчү: Dongguan Haodarong Trading Co., Ltd
Дарек: Room406, No.11, Jiaoyu Road, Dongcheng Street, Dongguan, China
Байланыш адам: Liao Jiansheng
E-mail: mox0903@163.com

ЕБ жооптуу адамы: QTEC EUREP GMBH
Дарек: CURTIUSSTRASSE 27, 23568 LUEBECK, Germany
E-mail: Cpcs@cpcs-tlab.hk
Телефон: +852-53700017

PDF форматындагы комплекстүү колдонуучу нускаманы жүктөп алуу үчүн жеткиликтүү: View Колдонуучунун колдонмосу (PDF)

	Nidec 24H055M020 BLDC Brushless Motor Product Manual Product manual for the Nidec 24H055M020 12V BLDC Brushless Motor, detailing voltage, polarity, and age restriction guidelines for safe operation.
	Powerdrive F300/F600 менен Nidec Dyneo+ Powerdrive F300 жана насостук диск F600 менен Nidec Dyneo+ кыймылдаткычтары үчүн 11ден 200 кВт чейинки кыймылдаткычтарды камтыган эксплуатациялоо боюнча колдонмо.
	Kato Engineering синхрондуу мотор-генератор топтомунун колдонмосу Kato Engineering синхрондуу, жалпы валдуу мотор-генератордук топтомдорун орнотуу, иштетүү жана техникалык тейлөө боюнча кеңири нускама. Мүчүлүштүктөрдү оңдоо боюнча көрсөтмөлөрдү, коопсуздук боюнча нускамаларды жана техникалык маалыматтарды камтыйт.
	Nidec PT-131 & PT-132 Contact Tachometers Operation Manual Operation manual for Nidec PT-131 and PT-132 Contact Tachometers, providing detailed instructions for measuring RPM, speed, and length, specifications, and maintenance.
	Nidec NE200/NE300 өзгөрүлмө ылдамдыктагы AC дискти тез иштетүү боюнча колдонмо Бул колдонмо Nidec NE200 жана NE300 сериясындагы өзгөрүлмө ылдамдыктагы AC дисктерин тез ишке киргизүү жана орнотуу боюнча маанилүү маалыматтарды берет. Ал коопсуздук чараларын, продуктуну камтыйт.view, моделдин сүрөттөмөлөрү жана орнотуу өлчөмдөрү.
	Guide d'installation Powerdrive MD Smart MS Nidec Leroy-Somer Powerdrive MD Smart MS өзгөрүлмө ылдамдыктагы дисктерин (60TNден 270TNге чейин) орнотуу боюнча колдонмо. Жалпы маалыматты, орнотууну, туташууларды, параметрлерди, опцияларды, коопсуздукту жана техникалык тейлөөнү камтыйт.

Nidec 24H Brushless Servo Motor