1. Киришүү
This manual provides essential information for the safe and efficient operation of your ANERN Hybrid Solar Inverter. Please read this manual thoroughly before installation and use, and keep it for future reference. The ANERN Hybrid Solar Inverter is designed to integrate solar power, battery power, and utility power to provide a reliable energy solution for your home or small commercial systems. It features a built-in MPPT solar controller and pure sine wave output.
2. Коопсуздук чаралары
- Always install circuit breakers for all lines.
- Do not connect or disconnect lines at will after power is applied.
- Инвертордун туура жерге туташтырылышын камсыз кылыңыз.
- Avoid exposing the inverter to moisture or extreme temperatures.
- Монтаждоо жана тейлөөнү квалификациялуу кызматкерлер гана аткарышы керек.
- The starting power of inductive load electrical appliances should be at least three times the rated power of the appliances to prevent damage to the inverter.
3. Продукт бүтүп калдыview
The ANERN Hybrid Solar Inverter is a versatile device designed for both grid-tied and off-grid applications. It features a user-friendly LCD display and multiple connection ports for various power sources and loads.
- LCD дисплей
- Статус көрсөткүчү
- Заряддоо көрсөткүчү
- Ката көрсөткүчү
- Функция баскычтары
- Күйгүзүү/өчүрүү
- AC киргизүү
- Негизги чыгаруу
- Экинчи чыгаруу
- Батарея киргизүү
- PV киргизүү
- Чаңга каршы комплект
- RS-232 communication port / WiFi-port
The inverter provides a pure sine wave output, ensuring compatibility with sensitive electronics.
4. Орнотуу жана зымдар
Proper installation and wiring are crucial for the safe and efficient operation of your inverter. Refer to the following steps and diagrams.
4.1 Кутудан чыгаруу жана алгачкы текшерүү
Upon receiving your inverter, carefully unbox it and inspect for any physical damage. Ensure all components listed in the packing list are present.
4.2 Электр зымдары боюнча нускамалар
Before connecting any wires, ensure the inverter is turned off and disconnected from all power sources. Open the cover plate by removing the screws to access the wiring terminals.
- **Connect the Battery**: Connect the positive (+) and negative (-) terminals of your battery bank to the corresponding BATTERY terminals on the inverter. Ensure a secure connection.
- **Connect the PV Panels**: Loosen the screws for the PV IN terminals and connect the positive (+) and negative (-) wires from your solar panel array. Tighten the screws securely.
- **Connect the Ground Wire**: Connect the ground wire to the COMM terminal.
- **Connect AC Input/Output**: Connect the AC input (utility grid) and AC output (loads) wires to the respective AC IN and MAIN OUT/SECOND OUT terminals. Ensure correct line (L) and neutral (N) connections.
After completing all wiring, close the cover plate and secure it with screws.
5. Иштөө нускамалары
5.1 Инверторду ишке киргизүү
Follow this sequence to safely start the inverter:
- Батарея которгучту күйгүзүңүз.
- Turn on the inverter using its power switch.
- Once the inverter is working, turn on the PV input, mains (AC input), and load switches.
Attention: AC and PV inputs can only be turned on after the inverter is working. Otherwise, the unit may be damaged easily.
5.2 Мониторинг жана орнотуулар
ЖК дисплей сизге мүмкүнчүлүк берет view various operational data and configure inverter settings. Use the function buttons (up, down, enter) to navigate through the menus.
Models with WiFi functionality allow for remote monitoring and control via a dedicated app for iOS and Android devices.
5.3 Load Output Modes
The inverter supports three load output modes:
- **Utility First (USB)**: Utility power is the primary source for loads. Solar power and battery energy will only supply power when utility power is unavailable.
- **Solar First (Default - SUB)**: Solar energy is the primary source for loads. If solar energy is not sufficient to power all connected loads, utility power will supplement. Battery power is used next if both solar and utility are insufficient.
- **SBU Priority (SBU)**: Solar energy is the primary source for loads. If solar energy is not sufficient to power all connected loads, battery energy will supplement. Utility power is used last if both solar and battery are insufficient.
5.4 Operation with/without Battery
The AN-SCI-ECO-4200 and AN-SCI-ECO-6200 models can operate with or without batteries. The AN-SCI-ECO-2000 and AN-SCI-ECO-3200 models require a battery to operate.
5.5 Shutting Down the Inverter
Follow this sequence to safely shut down the inverter:
- Turn off the switches for the load, PV input, and mains (AC input).
- Turn off the inverter using its power switch.
- Finally, turn off the battery switch.
6. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин инверторуңуздун узак иштөөсүн жана оптималдуу иштешин камсыздайт.
- **Cleaning**: Periodically clean the exterior of the inverter and ensure ventilation openings are free from dust and debris. Use a dry cloth for cleaning.
- **Connection Checks**: Regularly inspect all wiring connections (battery, PV, AC input/output, ground) to ensure they are tight and free from corrosion.
- **Environmental Conditions**: Ensure the operating environment maintains the specified humidity (5% to 95% Relative Humidity, non-condensing) and temperature (–10°C to 50°C).
- **Battery Health**: Monitor battery health and charge levels. Ensure the battery type is compatible and correctly configured in the inverter settings.
7. Кыйынчылыктарды
This section addresses common issues you might encounter with your ANERN Hybrid Solar Inverter.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Inverter not starting/no output | Incorrect startup sequence, battery not connected, low battery voltage, power switch off. | Follow the correct startup sequence (Section 5.1). Check battery connections and voltage. Ensure inverter power switch is ON. |
| Error Code 09 displayed | Өзгөчө ички ката. | Refer to the detailed error code section in the full user manual (if available) or contact technical support. |
| Inverter "hung" or unresponsive | Temporary software glitch or overload. | Perform a full shutdown (Section 5.5) and restart the inverter. If the issue persists, contact technical support. |
| PV input displayed as 0 | Solar panel not connected, insufficient lighting, or PV input not enabled. | Check solar panel connections. Ensure adequate sunlight. Verify PV input is enabled after inverter startup. |
| Appliances not starting (inductive loads) | Inverter power is insufficient for the inductive load's starting power. | Ensure the inverter's power rating is at least three times the starting power of inductive appliances. Consider reducing the number of inductive loads or upgrading the inverter. |
8. Техникалык шарттар
Below are the general specifications for the ANERN Hybrid Solar Inverter series. Specific values may vary by model.
8.1 Specifications for SCI-ECO-4200 & SCI-ECO-6200
| Өзгөчөлүк | SCI-ECO-4200 | SCI-ECO-6200 |
|---|---|---|
| Генерал | ||
| Номиналдуу кубаттуулук | 4200 Вт | 6200 Вт |
| Максималдуу PV киргизүү күчү | 6200 Вт | 6500 Вт |
| Өлчөмү (D x W x Y) | 420*350*110мм | 450*350*110мм |
| Салмагы | 13кг | |
| Output Type | БИР | |
| Акылдуу түзмөк | Ооба | |
| Сертификация | CE, RoHS | |
| Grid-Tied Operation (PV Input - DC) | ||
| Номиналдуу DC Voltage/Максималдуу туруктуу токтун көлөмүtage | 360VDC/500VDC | |
| Start-up Voltage/Баштапкы тамактандыруунун көлөмүtage | 90VDC/120VDC | |
| Максималдуу DC Voltage | 60-450VDC | |
| MPPT трекерлеринин саны/максималдуу киргизүү тогу | 18A | 22A |
| Тордун чыгышы (AC) | ||
| Номиналдуу AC Output Voltage | 220/230 / 240VAC | |
| AC Output Voltage Диапазон | 195.5-253VAC | |
| Номиналдык чыгуу агымы | 18.2A | 27.0A |
| Power Factor | >0.99 | |
| Feed-In Grid жыштык диапазону | 49-51±1Hz / 59-61±1Hz | |
| Натыйжалуулук | ||
| Максималдуу конвертациялоо эффективдүүлүгү (күн энергиясынан AC энергиясына) | 98% | |
| Two Loads Output Power | ||
| Толук жүк | 4200 Вт | 6200 Вт |
| Максималдуу негизги жүк | 4200 Вт | 6200 Вт |
| Максималдуу экинчи жүктөө (батарея режими) | 1400 Вт | 2067 Вт |
| Main Load Cut Off Voltage | 22VDC | 44VDC |
| Main Load Return Voltage | 26VDC | 52VDC |
| Тармактан сырткары иштөө | ||
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC | |
| Кабыл алынуучу AC киргизүү Voltage Диапазон | 90-280VAC же 170-280VAC | |
| Максималдуу AC киргизүү агымы | 30A | 40A |
| Номиналдуу иштөө жыштыгы | 50/60 Гц | |
| Толук күч | 7200 Вт | 12400 Вт |
| Батарея режиминдеги чыгуу (AC) | ||
| Номиналдуу Чыгуу Voltage | 220/230 / 240VAC | |
| Output Waveform | Таза синус толкун | |
| Натыйжалуулук (DC AC) | 94% | |
| Батарея жана заряддагыч | ||
| Номиналдуу DC Voltage | 24VDC | 48VDC |
| Максималдуу заряддоо агымы (Күн энергиясы менен AC) | 120A | |
| Максималдуу AC заряддоо агымы | 100A | |
| Иштөө чөйрөсү | ||
| Нымдуулук | 5%дан 95%га чейин Салыштырмалуу нымдуулук (конденсацияланбаган) | |
| Иштөө температурасы | –10°C - 50°C | |
| Сактоо температурасы | –15°C - 60°C | |
8.2 Specifications for AN-SCI-ECO-2000 & AN-SCI-ECO-3200
| Өзгөчөлүк | AN-SCI-ECO-2000 | AN-SCI-ECO-3200 |
|---|---|---|
| Генерал | ||
| Номиналдуу кубаттуулук | 2000VA/1600W | 3200VA/3000W |
| Өлчөмү (D x W x Y) | 360*270*100мм | 390*270*100мм |
| Output Type | БИР | |
| Акылдуу түзмөк | Ооба | |
| Сертификация | CE, RoHS | |
| AC киргизүү | ||
| AC Input Voltage | 230VAC | |
| Тандалма томtage Range (Personal Computers) | 170-280 VAC | |
| Тандалма томtage Range (Home Appliances) | 90-280 VAC | |
| Жыштык диапазону | 50 Гц / 60 Гц (Авто сезүү) | |
| AC Output | ||
| AC Voltage Регламент (Батт. Режим) | 230VAC ± 5% | |
| Толук күч | 4000VA | 6400VA |
| Натыйжалуулук (чоку) PVден инверторго | 98% | |
| Натыйжалуулук (чоку) Батареядан инверторго | 94% | |
| Transfer Time (Personal Computers) | 10 мс | |
| Transfer Time (Home Appliances) | 20 мс | |
| Толкун формасы | Таза синус толкун | |
| Батарея жана AC кубаттагыч | ||
| Батарея Voltage | 12VDC | 24VDC |
| Floating Charge Voltage | 13.5VDC | 27VDC |
| Ашыкча заряддан коргоо | 16VDC | 33VDC |
| Максималдуу AC заряддагы ток | 60A | |
| Күн кубаттагыч | ||
| PV Array кубаттуулугу | 2000 Вт | 3000 Вт |
| MPPT диапазону @ Operating Voltage | 30-400VDC | |
| Максималдуу PV Array Open Circuit Voltage | 400VDC | |
| Максималдуу кубаттоо тогу | 80A | |
| Иштөө чөйрөсү | ||
| Нымдуулук | 5%дан 95%га чейин Салыштырмалуу нымдуулук (конденсацияланбаган) | |
| Иштөө температурасы | –10°C - 50°C | |
| Сактоо температурасы | –15°C - 60°C | |
9. Кепилдик жана колдоо
The ANERN Hybrid Solar Inverter comes with a two-year warranty period. For any technical assistance, warranty claims, or questions, please contact ANERN customer support.
ANERN is dedicated to providing clean energy solutions and has over 12 years of experience in the solar energy and LED lighting industry, serving over 200 countries globally.
10. Колдонуучунун кеңештери
- **Battery Compatibility**: The inverter is compatible with Lead-acid, Gel, AGM, Lithium Iron Phosphate (LiFePo4), and Lithium batteries. Ensure the battery voltage matches the inverter's requirements (e.g., 24V for 3.6KW/4.2KW, 48V for 6.2KW) and the capacity is not less than 100AH.
- **Inductive Loads**: When connecting inductive loads like refrigerators or air conditioners, ensure the inverter's power rating is at least three times the appliance's starting power to prevent operational issues.
- **Simultaneous Power Sources**: The inverter can utilize PV, battery, and grid supply simultaneously. The default mode prioritizes PV.
- **AC Output Voltage**: Note that the inverter provides 220V/230V/240V AC output. If your region uses 110V AC, a step-down transformer or a different inverter model may be required as these models do not support 110V output.
- **WiFi Module**: Some models come with a WiFi module for remote monitoring. Verify your model's specifications if this feature is desired.
- **PV Input for 2000W/3200W Models**: The upgraded 2000W and 3200W models can operate with an open-circuit voltage of the solar panel higher than 35VDC, and a stable input of 30VDC is sufficient, eliminating the need for a continuous 90VDC input like some other series.
