1. Киришүү
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Schneider Electric IDPNa A9 Circuit Breaker with Leakage Protection. Please read this manual thoroughly before installation and keep it for future reference.
2. Коопсуздук маалыматы
WARNING: Risk of electric shock. Installation and maintenance should only be performed by qualified personnel.
- Always disconnect power at the main supply before working on electrical circuits.
- Ensure proper grounding and wiring according to local electrical codes and standards.
- Эгер аппарат бузулуп калса, аны иштетпеңиз.
- This device is designed for specific voltage and current ratings. Do not exceed these limits.
- Wear appropriate personal protective equipment (PPE) when working with electricity.
3. Продукт бүтүп калдыview
The Schneider Electric IDPNa A9 Circuit Breaker is a single-pole plus neutral (1P+N) device designed for overcurrent and leakage protection in electrical circuits. It functions as an air switch, providing reliable circuit interruption. Variants are available with different current ratings and a 30mA leakage protection threshold.
Сүрөт 3.1: Алдыңкы view of the Schneider Electric IDPNa Vigi+ C10 30mA circuit breaker, showing the model, voltage, current, and leakage protection ratings.
Сүрөт 3.2: Алдыңкы view of the Schneider Electric IDPNa Vigi+ C20 30mA circuit breaker, illustrating a different current rating variant.
3.3-сүрөт: Каптал view of the circuit breaker, displaying the Merlin Gerin branding and a product identification barcode.
4. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Моделдер сериясы | IDPNa |
| Тtage Рейтинг | 230V~ |
| Current Ratings Available | 10А, 16А, 20А, 25А, 32А |
| Leakage Protection Current | 30мА |
| Үзүү жөндөмдүүлүгү | 4500 (kA or A, as indicated on device) |
| поляктар | 1P+N (Single Pole + Neutral) |
| Origin | Материк Кытай |
| Пакет Салмагы | 0.6 кг |
| Пакеттин өлчөмдөрү (L x W x Y) | 31 см х 13 см х 6 см |
Өлчөмдөр
Figure 4.1: Detailed dimensional drawing of the circuit breaker in millimeters.
| Өлчөө | Маани (мм) |
|---|---|
| Жалпы Width | 18 |
| Жалпы бийиктиги | 96.1 |
| Дене бийиктиги | 92.5 |
| Жалпы тереңдик | 65.8 |
| Дене тереңдиги | 49.3 |
| Handle Extension Depth | 20 |
| Mounting Clip Height | 5.5 |
5. Орнотуу жана орнотуу
Installation of this circuit breaker should only be carried out by a qualified electrician in accordance with all applicable national and local electrical codes.
5.1 Монтаждоо
- The IDPNa circuit breaker is designed for DIN rail mounting.
- Ensure the DIN rail is securely fastened within the electrical panel.
- Snap the circuit breaker onto the DIN rail, ensuring it is firmly seated.
5.2 Электр зымдары
- Before wiring, ensure the main power supply is OFF.
- Connect the incoming live (phase) wire to the designated terminal (typically marked 'L' or '1').
- Connect the incoming neutral wire to the designated terminal (typically marked 'N' or '2').
- Connect the outgoing live (phase) wire to the load side terminal.
- Connect the outgoing neutral wire to the load side neutral terminal.
- Ensure all connections are tight and secure to prevent loose contacts and overheating.
- Verify correct polarity and connections before restoring power.
6. Иштөө нускамалары
The circuit breaker features a simple ON/OFF lever for operation.
- Күйгүзүү: Push the lever upwards to the 'I' (ON) position.
- Өчүрүү: Push the lever downwards to the 'O' (OFF) position.
- Катуу абалы: If an overcurrent or leakage fault occurs, the lever will automatically move to an intermediate or 'OFF' position. To reset, first move the lever fully to the 'O' (OFF) position, then push it upwards to the 'I' (ON) position. If it trips again immediately, do not force it; investigate the cause of the fault.
7. Техникалык тейлөө
The Schneider Electric IDPNa circuit breaker is designed for minimal maintenance. However, periodic checks are recommended:
- Визуалдык текшерүү: Regularly inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections.
- Тазалоо: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquids or abrasive cleaners.
- Функционалдык текшерүү: Periodically test the leakage protection function if a test button is present (refer to device markings).
- Кесиптик текшерүү: It is advisable to have your electrical system, including circuit breakers, inspected by a qualified electrician periodically.
8. Кыйынчылыктарды
- Circuit Breaker Trips Frequently:
- Себеби: Overload, short circuit, or ground fault (leakage).
- Чечим: Disconnect some appliances from the circuit to reduce load. Check for damaged wiring or faulty appliances. If it's a leakage fault, identify the source of the current leakage. Consult a qualified electrician if the issue persists.
- Circuit Breaker Does Not Reset:
- Себеби: Persistent fault or internal damage.
- Чечим: Ensure the fault has been cleared. If the breaker still won't reset after clearing the fault, it may be damaged and require replacement by a qualified electrician.
- No Power to Circuit, Breaker is ON:
- Себеби: Loose connection, fault elsewhere in the circuit, or internal breaker failure.
- Чечим: Check all wiring connections. Inspect other components in the circuit. If all else fails, consult a qualified electrician.
9. Колдонуучунун кеңештери
Re'ден колдонуучунун конкреттүү кеңештери болгон жокviews же бул продукт үчүн С&Ж.
10. Кепилдик жана колдоо
Кепилдик маалыматы жана техникалык колдоо үчүн расмий Schneider Electricке кайрылыңыз webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
