1. Киришүү
Thank you for choosing the SPORTARC S830 Ebike LCD Display. This intelligent display serves as a comprehensive driving computer and control panel for your electric bicycle system. It provides essential riding data and allows for control over various e-bike functions. This manual will guide you through the installation, operation, and maintenance of your S830 display.
Видео: Бүттүview of the S830 Ebike LCD Display features and design.
2. Коопсуздук маалыматы
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage of any connected battery systems. Always ensure proper installation and secure connections to prevent accidents.
3. Пакеттин мазмуну
- 1 x S830 LCD Display Unit
- 1 x Control Switch (integrated with cable)
- Connecting Cables (SM interface or 5PIN waterproof interface, depending on selection)
4. Продукт бүтүп калдыview
The S830 LCD display is designed to provide comprehensive information and control for your e-bike. Key features include:
- Көп функциялуу дисплей: Shows current speed, average speed, maximum speed, remaining battery, clock, total travel distance (ODO), and one-way distance (TRIP).
- PAS Level Control: Allows the rider to select the required pedal-assist level (if PAS system is installed).
- Ката көрсөткүчү: Displays error codes for quick troubleshooting.
- Арткы жарык: Automatic backlight adjustment for day and night visibility.
- USB кубаттоо порту: Integrated 5V 500mA USB port for charging mobile devices.
- Туруктуу дизайн: Made from high-quality ABS material, suitable for outdoor use.
Image: S830 display illustrating Speed, Power indicator, Mileage, Error display, Gear display, Light display, Error code, and Battery display.
Image: Backlight description for the S830 display, showing day (PM 7:00 - AM 17:59) and night (PM 18:00 - AM 7:00) modes.
5. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | S830 |
| Type | E-bike Intelligent LCD Display |
| Материал | ABS |
| Электр камсыздоо | 24V/36V/48V |
| Жумушчу токту баалады | 10мА |
| Максималдуу жумушчу ток | 30мА |
| Штаттан тышкары агып чыгуу агымы | <1μA |
| Иштөө температурасы | -20℃ ~ 60℃ |
| Сактоо температурасы | -30℃ ~ 70℃ |
| Display Dimensions (H x W x T) | 92мм x 55мм x 18мм |
| Негизги кабелдин узундугу | Болжол менен 1700мм (67 дюйм) |
| Control Switch Cable Length | Болжол менен 300мм (11.81 дюйм) |
| Интерфейс параметрлери | SM interface, 5PIN waterproof interface |
| USB чыгышы | 5V 500mA |
Image: Detailed dimensions of the S830 LCD Display unit.
Image: S830 display showing the main cable length (1700mm) and control switch cable length (300mm).
6. Орнотуу
6.1 Дисплейди орнотуу
- Identify a suitable position on your e-bike's handlebar for the S830 display.
- Интегралдык cl колдонуңузamps to securely attach the display to the handlebar. Ensure it is positioned for optimal visibility and accessibility.
- Tighten the mounting screws firmly, but do not overtighten to avoid damage.
6.2 Зымдарды туташтыруу
The S830 display is available with either an SM interface or a 5PIN waterproof interface. Ensure you have the correct version for your e-bike system.
- Locate the corresponding connector on your e-bike's controller or wiring harness.
- Carefully align the pins and connect the display's cable to the e-bike system.
- For the 5PIN waterproof interface, ensure the connection is fully seated and the waterproof seal is intact.
- Connect the control switch cable to the designated port on the main display cable.
Image: S830 display with SM interface, showing the connection details and wire colors (red, blue, yellow, green, black).
Image: S830 display with 5PIN waterproof interface, showing the secure connector.
6.3 Initial Settings (Wheel Size)
The wheel size can be configured on the S830 display to ensure accurate speed and mileage readings. Refer to your e-bike's controller manual or the display's advanced settings menu (if available) for instructions on how to adjust this parameter. Typically, this involves entering a settings mode by holding down specific buttons.
7. Иштөө нускамалары
7.1 Күйгүзүү/өчүрүү
- To power on the display, press and hold the 'M' button on the control switch for a few seconds.
- To power off the display, press and hold the 'M' button again until the screen turns off.
7.2 Дисплей функциялары
The S830 display provides the following information:
- CUR: Учурдагы ылдамдык
- ЫЛДАМ: Учурдагы ылдамдык (км/саат же миль/саат)
- Батарея көрсөткүчү: Калган батареянын деңгээлин көрсөтөт.
- PAS: Pedal Assist System level (0-5, or similar range).
- ОО, ЭМНЕ: Total Odometer (total distance traveled).
- САПАР: Trip Distance (distance for the current ride).
- Жарык көрсөткүчү: Shows if headlights are on.
- Ката коду: Displays specific error codes if a fault is detected.
7.3 Control Switch Functions
Image: The three-button control switch for the S830 display.
- Жогору баскычы (▲): Increases PAS level, navigates up in menus.
- Төмөн баскычы (▼): Decreases PAS level, navigates down in menus.
- M Button (M): Power On/Off, cycles through display modes (e.g., ODO, TRIP), enters/exits settings.
7.4 USB кубаттоо
The S830 display features a USB port for charging external devices.
- Locate the USB port on the side or back of the display unit.
- Аспабыңызды туура келген USB кабели аркылуу туташтырыңыз.
- The output is 5V 500mA.
Image: S830 display showing the integrated USB charging port and its function.
8. Техникалык тейлөө
- Тазалоо: Дисплейдин экранын жана корпусун жумшак менен сүртүңүз, damp кездеме. Экранга же экранга зыян келтириши мүмкүн болгон абразивдүү тазалоочу каражаттарды же эриткичтерди колдонуудан алыс болуңуз.asing.
- Сактагыч: When not in use for extended periods, store the display within the recommended temperature range (-30℃ ~ 70℃) and away from direct sunlight or extreme moisture.
- Байланыштары: Бардык кабелдик туташуулардын бекем жана дат баспагандыгын же бузулбагандыгын текшерүү үчүн мезгил-мезгили менен текшерип туруңуз.
- Суу каршылык: While the 5PIN version is waterproof, avoid prolonged submersion of the display unit.
9. Кыйынчылыктарды
- Дисплей күйбөйт:
- Check all cable connections to ensure they are firmly seated.
- Verify that your e-bike's battery is charged and powered on.
- Ensure the display's power supply (24V/36V/48V) matches your e-bike system.
- Туура эмес ылдамдык/километр көрсөткүчтөрү:
- Confirm that the wheel size setting on the display is correctly configured for your e-bike.
- Check the speed sensor connection and ensure it is properly installed and functioning.
- Ката коддору көрсөтүлүүдө:
- The S830 can display error codes. Consult your e-bike controller's manual or contact technical support with the specific error code for diagnosis.
- USB заряддоо иштебей жатат:
- Дисплейдин күйгүзүлгөнүн текшериңиз.
- Check the USB cable and the device you are trying to charge.
- Verify the device's charging requirements are within the 5V 500mA output of the display.
10. Колдонуучунун кеңештери
- Айдоо алдындагы текшерүү: Always perform a quick check of your display and e-bike system before each ride to ensure all functions are working correctly.
- Өзүңүз менен таанышыңыз: Take some time to familiarize yourself with the button functions and display modes in a safe, stationary environment before riding.
- Батарея мониторинги: Keep an eye on the battery indicator to avoid running out of power unexpectedly during your ride.
- Кабелдик башкаруу: Secure all cables neatly to prevent them from getting snagged or damaged during use.
11. Кепилдик жана колдоо
Кепилдик жөнүндө маалымат, техникалык колдоо же бул колдонмодо камтылбаган башка суроолор боюнча сатуучуга же өндүрүүчүгө түздөн-түз кайрылыңыз. Сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.
