AFYEEV EV Charger Schuko to CEE Adapter Instruction Manual

1. Киришүү

This manual provides instructions for the safe and efficient use of your AFYEEV EV Charger Schuko to CEE Adapter. This adapter is designed to connect your portable EV charger to a standard power socket, converting the power output to suit your electric vehicle's charging requirements. It supports both 11KW and 7.2KW EV chargers, offering flexibility for various charging setups.

Figure 1: AFYEEV EV Charger Schuko to CEE Adapter (Red and Blue variants)

2. Коопсуздук маалыматы

Сураныч, жаракат же зыянга жол бербөө үчүн бул продуктуну колдонуудан мурун бардык коопсуздук эскертүүлөрүн жана нускамаларын кылдат окуп чыгыңыз. Бул колдонмону келечекте маалымат алуу үчүн сактаңыз.

• Электр коопсуздугу: Always ensure the power source matches the adapter's specifications. Do not use the adapter if it is damaged or if the cables are frayed.
• Экологиялык шарттар: The adapter has an IP55 rating, indicating protection against dust and low-pressure water jets. However, avoid submerging it in water.
• Иштөө температурасы: Use the adapter within the specified operating temperature range of -30℃ to 50℃.
• Current Compatibility (Important Notice): The blue CEE adapter supports a maximum output current of 32A. If paired with a 16A EU (Schuko) plug, it will only output 16A current, and the charger must be adjusted to a maximum of 16A. It cannot be used directly with a 32A current charger without proper current conversion. If you need to use it with a 32A current charger, you must connect the adapter to other control switches to convert the current to 32A before connecting it to the 32A current charger. Failure to do so may cause the charger to overheat.
• Материал: The adapter is constructed from high-strength anti-lock brake system plastic and copper alloy for durability.

3. Пакеттин мазмуну

Your package should contain one of the following adapter types:

• For 11KW EV Charger (Red CEE Adapter): Schuko Plug to CEE Red Power Female Plug 5 Pins Socket Adapter.
• For 7.2KW EV Charger (Blue CEE Adapter): Schuko Plug to CEE Blue Power Female Plug 3 Pins Socket Adapter (with bare wire connection for CEE side).

Бардык компоненттердин бар экенин жана бузулбаганын текшерүү үчүн, алгандан кийин мазмунун текшериңиз.

4. Техникалык шарттар

Figure 2: Red CEE Adapter Specifications

Figure 3: Blue CEE Adapter Specifications

Figure 4: Red 5-Pins 16A Connector Dimensions

Figure 5: Blue 3-Pins 32A Connector Dimensions

5. Орнотуу

Follow these steps to properly set up your EV charger adapter:

1. Identify Adapter Type: Determine if you have the Red CEE adapter (for 11KW chargers) or the Blue CEE adapter (for 7.2KW chargers).
2. Кубат булагына туташуу: Insert the Schuko plug end of the adapter into a compatible wall power socket. Ensure the socket is properly grounded and can handle the required current.
3. Connect to EV Charger: Connect the CEE female end of the adapter to the CEE male plug of your portable EV charger. Ensure a secure and snug connection.
4. For Blue CEE Adapter (Important): If you are using the blue CEE adapter with a 32A charger, and your power source is a 16A EU (Schuko) plug, you MUST use an additional control switch to convert the current to 32A before connecting to the charger. Directly connecting a 32A charger to a 16A EU plug via this adapter without current conversion will limit the charger to 16A and may cause overheating if the charger is not manually adjusted.
5. Байланышты текшерүү: Double-check all connections to ensure they are firm and correctly seated.

Figure 6: Schuko to CEE Red Socket Extend Cable Connection Diagram

Figure 7: Red CEE Adapter Connection

Figure 8: Blue CEE Adapter Connection

6. Иштөө нускамалары

Once the adapter is properly set up, follow these steps to begin charging your EV:

1. Заряддоону баштоо: Plug your EV charger into the vehicle's charging port.
2. Күйгүзүү: Turn on the power supply to the Schuko plug.
3. Монитор заряддоо: Observe your EV charger's indicators to confirm that charging has begun.
4. Кубаттын конверсиясы: When using the adapter, the charging capacity of an 11KW EV Charger will convert from 3 Phase 16A 11KW to 1 Phase 16A 3.5KW. Similarly, a 7.2KW EV Charger's capacity will convert from 1 Phase 32A 7.2KW to 1 Phase 32A 3.5KW when connected via the adapter to a standard Schuko outlet.
5. Коопсуз ажыратыңыз: To stop charging, first disconnect the charger from the vehicle, then unplug the Schuko adapter from the wall socket.

Figure 9: EV Charging Scenario

7. Техникалык тейлөө

• Тазалоо: Wipe the adapter with a dry, clean cloth. Do not use harsh chemicals or abrasive cleaners.
• Сактагыч: Store the adapter in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
• Текшерүү: Periodically inspect the cable and connectors for any signs of wear, damage, or corrosion. If any damage is found, discontinue use immediately and contact support.

8. Кыйынчылыктарды

Adapter not providing power:

• Ensure the wall socket is active and providing power.
• Check all connections for tightness and proper seating.
• Inspect the adapter cable and connectors for visible damage.

Charger overheating (Blue CEE Adapter):

• This is likely due to using a 32A charger with a 16A EU (Schuko) plug without proper current conversion.
• Ensure the charger's current setting is manually adjusted to 16A, or use an external control switch to convert the current to 32A if your power source and charger support it.

Жай кубаттоо ылдамдыгы:

• The adapter converts the power output. An 11KW (3 Phase 16A) charger will operate at 1 Phase 16A (3.5KW) when connected via this adapter to a standard Schuko outlet. A 7.2KW (1 Phase 32A) charger will also operate at 1 Phase 32A (3.5KW) when connected via this adapter to a standard Schuko outlet. This is normal operation due to the power conversion.
• Ensure your portable EV charger is set to the correct current limit for the connected power source (e.g., 16A for a standard Schuko outlet).

9. Колдонуучунун кеңештери

• This adapter is designed for portable use, making it convenient for charging your EV in various locations with compatible power outlets.
• Always verify the compatibility of the adapter with your specific EV charger (11KW or 7.2KW) to ensure optimal performance and safety.
• Be mindful of the power conversion when using the adapter, as it will adjust the charging capacity of your EV charger to 3.5KW when connected to a standard Schuko plug.

10. Кепилдик жана колдоо

Бул продукт менен келет 1 жылдык кепилдик from the date of purchase. If you encounter any quality problems or require assistance, please contact the seller directly. All inquiries will be addressed promptly, typically within 24 hours.

Figure 10: Warranty & Service Information