VXDIAG VCX NANO NX600 OBD2 диагностикалык куралынын колдонуучу колдонмосу

1. Introduction and Overview

The VXDIAG VCX NANO NX600 is a professional vehicle communication interface designed for comprehensive diagnostics, ECU programming, and advanced service functions for GM and Opel vehicles. This tool supports a wide range of models from 2005 to 2020, including Chevrolet, Cadillac, Buick, and select Opel and Saab models. It offers lifetime free updates for its license and firmware, along with a 5-year warranty and dedicated technical support.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• All System Diagnostics
• ECU Programming & Coding
• 30+ Special Reset Services
• Active Test (Bi-directional Control)
• Толук OBD2 функциялары
• Автоматтык VIN сканерлөө
• Support for J2534 and ISO 2290 PDU protocols

Figure 1: VXDIAG VCX NANO device with a laptop, illustrating its core functions.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before using the device. Failure to do so may result in injury or damage to the device or vehicle.

• Аппаратты дайыма жакшы желдетилген жерде иштетиңиз.
• Do not operate the device near open flames or combustible materials.
• Wear appropriate personal protective equipment, such as safety glasses, when working on vehicles.
• Ensure the vehicle's ignition is off before connecting or disconnecting the device, unless instructed otherwise by a specific diagnostic procedure.
• Keep the device dry and clean. Avoid exposure to extreme temperatures.
• Only use the provided cables and accessories.

3. Пакеттин мазмуну

Upon opening your VXDIAG VCX NANO NX600 package, please verify that all the following items are included:

• VXDIAG VCX NANO NX600 Vehicle Communication Interface (USB or WIFI version)
• OBD2 Extension Cable (for USB version)
• USB Cable (for USB version)
• Колдонуучунун Колдонмосу (бул документ)
• Пакет куту

Figure 2: Typical package contents for the VXDIAG VCX NANO NX600.

4. Техникалык шарттар

5. Орнотуу жана орнотуу

5.1 Системалык талаптар

• Операция системасы: Windows 7 (32-bit or 64-bit) or Windows 10 (Professional or Enterprise editions). Home editions are not supported.
• Байланыш: Available USB port for USB version, or Wi-Fi capability for WIFI version.

5.2 Программалык камсыздоону орнотуу

The VXDIAG VCX NANO NX600 requires the 'VX-Manager' driver application for operation and updates. Please download the latest version of VX-Manager from the official VXDIAG webсайт. Орнотуу үчүн экрандагы нускамаларды аткарыңыз.

5.3 Аппараттык туташуу

For USB Version:

1. Connect the VXDIAG VCX NANO device to your laptop using the provided USB cable.
2. Connect the OBD2 extension cable to the VXDIAG device.
3. Locate your vehicle's OBD2 diagnostic port (typically under the dashboard on the driver's side) and connect the other end of the OBD2 extension cable to it.
4. Унаанын от алдыруучу системасын "ON" абалына коюңуз (кыймылдаткыч өчүрүлгөн).

For WIFI Version:

1. Connect the VXDIAG VCX NANO device to your vehicle's OBD2 diagnostic port.
2. Унаанын от алдыруучу системасын "ON" абалына коюңуз (кыймылдаткыч өчүрүлгөн).
3. On your laptop, connect to the Wi-Fi network broadcast by the VXDIAG device.

Figure 3: Connection diagram for J2534 programming, illustrating the link between the vehicle, VCX NANO, and software on a laptop.

6. Иштөө нускамалары

Once the device is connected and the VX-Manager software is running, you can access various diagnostic and programming functions.

6.1 Бардык системаларды диагностикалоо

The Diagnostics application allows you to establish a data link with the electronic control systems of your vehicle. It performs functional tests and retrieves diagnostic information such as trouble codes, event codes, and live data for systems including:

• ABS (блокировкага каршы тормоз системасы)
• SRS (Кошумча чектөө системасы)
• Мотор системасы
• Трансмиссия системасы
• Тормоз системасы
• Эмиссия системасы
• Күйүүчү май системасы
• Жарык системасы
• Сүргүч системасы
• Жана дагы көптөгөн.

Figure 4: Visual representation of the All System Diagnosis capability, showing various vehicle systems.

6.2 Толук OBD2 функциялары

The device supports all 10 modes of OBD2 tests for comprehensive emission-related diagnostics:

1. Окуу коддору: Диагностикалык көйгөй коддорунун (DTC) кеңири сүрөттөмөлөрүн көрсөтөт.
2. Erasing коддору жана баштапкы абалга келтирүү: Check Engine жарыгын (MIL) өчүрөт, коддорду тазалайт жана мониторлорду баштапкы абалга келтирет.
3. Маалымат агымы: Графикалык чиймелерди түзүү жана кадр маалыматтарын сактоо менен түз эфирдеги ECU/PCM маалымат агымын окуп жана көрсөтөт.
4. I/M даярдыгы абалы: Чыгарууларга байланыштуу системалардын туура иштеп жатканын жана текшерүүгө даяр экенин көрсөтөт.
5. Түз эфирдеги маалыматтарды окуңуз: Displays continuous data stream from the vehicle in live graphic (waveform) format.
6. View Кадр дайындарын тоңдуруп коюу: Зыяндуу заттар бөлүп чыгарууга байланыштуу мүчүлүштүктөр пайда болгондо, борттогу компьютер тарабынан жазылган унаанын абалын текшерет.
7. O2 сенсор тести: O2 сенсорунун мониторунун сыноо жыйынтыктарын алат жана көрсөтөт.
8. Борттогу монитор тести: Чыгарууларга байланыштуу кыймылдаткычтын компоненттеринин сыноо жыйынтыктарын алат жана көрсөтөт.
9. Унаа жөнүндө маалыматты окуу: VIN, CID жана CVN көрсөтөт.
10. Компоненттик тест: Унаанын айрым компоненттеринин иштешин текшерүү үчүн сканерден келген буйруктар аркылуу аларды иштетет.

6.3 ECU программалоо жана коддоо

The VCX NANO NX600 supports advanced ECU functions:

• Online/Offline Programming: Perform programming and coding within the Service Programming System (SPS). Note: An online account for OEM software is required and not provided with the device.
• Increased Reprogramming Speed: Reprogramming speed can be increased by 20-70% compared to traditional methods.
• J2534 Original ECU Programming: Supports ECU software upgrades, calibration, and replacement flashing/programming.

Figure 5: ашыкview of ECU Coding & Programming functions, including modifications, ECU matching, refreshing hidden features, activating high-end features, and customizing OE-settings.

6.4 J2534 Protocol Support

The device is a standard OBD2 automotive diagnostic tool that supports J2534 and ISO 2290 PDU protocols. It is designed to meet four major automotive industry standards:

• EURO 2534 менен SAE-J1-2/5 Pass-Thru
• ISO-22900 MVCI & D-PDU

6.5 Active Test (Bi-directional Control)

Active Test, also known as actuation test or bi-directional control, involves sending and retrieving information from a vehicle control module. This function allows you to command the control module to perform specific actions, such as system tests, actuator tests, functional tests, or reinitialization, significantly reducing diagnostic time. For example, you can command the fuel pump to activate to check fuel pressure.

6.6 Special Functions (30+ Reset Services)

The VCX NANO NX600 offers over 30 special functions for various scheduled services and maintenance tasks:

• Нефть Лamp/Oil Reset: Resets the engine oil life system.
• Электрондук кол тормозду (EPB) баштапкы абалга келтирүү: Maintains the electronic braking system.
• Руль бурчу сенсорун (SAS) калибрлөө: Рул бурчу сенсорду калибрлейт.
• ABS кан агуу: Performs bi-directional tests for the Anti-lock Braking System.
• Дөңгөлөк басымын көзөмөлдөө системасын (TPMS) баштапкы абалга келтирүү: Looks up tire sensor IDs and performs replacement/test procedures.
• Жабдууларды үйрөнүү: Кыймылдаткычтын иштөө процедуралары үчүн бөлүштүргүч валдын абалын сенсорлордон көзөмөлдөйт.
• Инжектор коддоо: Codes injectors to optimize engine performance.
• Battery Maintenance System (BMS) Reset: Re-matches control modules and sensors for accurate battery detection.
• Дизель бөлүкчөлөрүнүн чыпкасын (DPF) калыбына келтирүү: Carries out DPF regeneration and component replacement teach-in.
• Электрондук дроссель абалын калыбына келтирүү: Makes initial settings to throttle actuators.
• Gearbox Matching: Completes gearbox self-learning for improved shifting quality.
• Adaptive Front-lighting System (AFS) Reset: Адаптивдүү башты баштапкы абалга келтиретamp системасы.
• Люкту баштапкы абалга келтирүү: Sets sunroof lock-off, rain-closing, and memory functions.
• Suspension Calibration: Adjusts body height and performs level calibration for air suspension systems.
• Other functions include: Maintenance Light Reset, throttle learning, tire modification, door and window calibration, urea reset, NOx reset, start-stop setting, language setting, seat calibration, shielding failure, and more.

Figure 6: A selection of the 30+ maintenance and special functions available.

6.7 Авто VIN сканерлөө

This feature allows for quick identification of vehicle information, such as manufacturer, model, year, and place of manufacture, by automatically reading the Vehicle Identification Number (VIN) and running diagnostics on the selected system.

7. Техникалык тейлөө

The VXDIAG VCX NANO NX600 is designed for ease of maintenance, primarily through software and firmware updates.

7.1 Программалык камсыздоо жана микропрограмма жаңыртуулары

The device includes a lifetime license, meaning you do not need to pay for license renewals. If the license time expires, you can directly update it using the 'VX-Manager' driver application. Regularly check for and install updates to ensure optimal performance, compatibility with new vehicle models, and access to the latest features and bug fixes.

• Open the 'VX-Manager' application on your computer.
• Connect the VCX NANO device to your computer.
• Navigate to the 'Firmware' or 'License' section within VX-Manager.
• Follow the prompts to check for and install available updates.

8. Кыйынчылыктарды

If you encounter issues with your VXDIAG VCX NANO NX600, please refer to the following common problems and solutions:

• Түзмөк компьютер тарабынан таанылган жок:
  - USB кабели аппаратка да, компьютерге да бекем туташканын текшериңиз.
  - Try a different USB port or cable.
  - For WIFI versions, ensure your computer is connected to the device's Wi-Fi network.
  - Verify that the VX-Manager software is installed correctly and drivers are up-to-date.
• Software prompts for OEM software purchase:
  - The VXDIAG device provides the hardware interface. Specific OEM diagnostic or programming software (e.g., for GM's SPS) must be acquired separately through legal channels. The device does not include these proprietary software licenses.
• Diagnostic functions not working or incomplete:
  - Ensure the vehicle's ignition is ON (engine off).
  - Verify that the device firmware and license are up-to-date via VX-Manager.
  - Check vehicle compatibility for the specific function you are trying to perform (e.g., year range, model support).
• Slow reprogramming speed:
  - Ensure a stable connection (preferably wired USB for critical operations).
  - Close other unnecessary applications on your computer to free up resources.
• Түзмөк күйбөй жатат:
  - Ensure the device is correctly plugged into the vehicle's OBD2 port.
  - Check the vehicle's battery voltage; төмөнкү көлөмtage түзмөктүн күйүп кетишине жол бербейт.

9. Колдонуучунун кеңештери

• OEM Software: Remember that while the VXDIAG VCX NANO NX600 is a powerful interface, it does not include proprietary OEM diagnostic or programming software. You will need to acquire these licenses separately through official channels for advanced functions like online ECU programming.
• Туруктуу байланыш: For critical operations such as ECU programming or coding, always use a stable USB connection to your laptop. This minimizes the risk of data corruption or interruption.
• Операция системасы: Confirm your computer's operating system is Windows 7 (32-bit or 64-bit) or Windows 10 (Professional or Enterprise). Home versions of Windows are not supported and may lead to compatibility issues.
• Үзгүлтүксүз жаңыртуулар: Periodically check for and install software and firmware updates via the 'VX-Manager' application to ensure your device has the latest features and vehicle compatibility.
• Унаа шайкештиги: Always verify that your vehicle's make, model, and year fall within the supported range (2005-2020 for GM cars, including Chevrolet, Cadillac, Buick, and some Opel/Saab models) before attempting advanced diagnostics or programming.

10. Кепилдик жана колдоо

10.1 Кепилдик

The VXDIAG VCX NANO NX600 comes with a 5 жылдык кепилдик from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Additionally, a 365 күндүк акысыз алмаштыруу саясаты is offered: if your device problem cannot be resolved after contacting technical support, you may send it back for repair or exchange for a new unit.

10.2 Техникалык колдоо

VXDIAG provides өмүр бою техникалык колдоо for the VCX NANO NX600. If you encounter any issues or have questions regarding the device's operation, software, or vehicle compatibility, please contact VXDIAG's official support channels for assistance.