NEWONE 18V/20V MAX Brushless Lithium-Ion Cordless 12-Tool Combo Kit

Introduction

Thank you for choosing the NEWONE 18V/20V MAX Brushless Lithium-Ion Cordless 12-Tool Combo Kit. This versatile kit provides a powerful brushless motor main body and 12 interchangeable attachments, offering a wide range of functionalities for various tasks. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

Продукт бүттүview & Компоненттери

The NEWONE 12-Tool Combo Kit features a robust brushless motor main body designed for quick attachment changes. The kit includes the following components:

Main Tool Body Features:

• Unlocking Lever: For attaching and detaching tool heads.
• Brushless Motor: Натыйжалуу кубаттуулукту жана шаймандын узак иштөө мөөнөтүн камсыз кылат.
• Багыт которуштуруу: Controls forward and reverse rotation.
• Күйгүзүү/өчүрүү: Негизги кубаттуулукту башкаруу.
• туткасы: Ыңгайлуу колдонуу үчүн эргономикалык кармагыч.
• Unlock Button for Battery: Батарея пакетин чыгарат.
• Кайра заряддалуучу батарея: 18V/20V Lithium-Ion battery.
• LED жарык: Жумуш аймагын жарык кылат.

Камтылган Тиркемелер:

• Impact Drill Attachment (Ø13mm, No: 0-305/0-1400min⁻¹, Impact Frequency: 0-4450/0-17550BPM)
• Impact Screwdriver Attachment (No: 0-2700/min, Impact Frequency: 0-3300BPM)
• Jigsaw Attachment (No: 0-2300/min)
• Chainsaw Attachment (Guide bar length: 4inch, Chain speed: 4.8m/S)
• Mouse Sander Attachment (No: 0-10000/min, 138×97mm)
• Multi-tool (No: 0-21000/min, Oscillation angle: 3°)
• Reciprocating Saw (No: 0-3500/min, Stroke Length: 15mm)
• Circular Saw Attachment (No: 5000/min)
• Electric Wrench Attachment
• Grass Mover & Hedge Trimmer Attachment
• Screwdriver Attachment
• Impact Driver Attachment

Жайгашуу

Battery Installation & Removal:

1. To install, align the battery with the base of the main tool body and slide it in until it clicks securely into place.
2. To remove, press the 'Unlock Button for Battery' and slide the battery out.

Attaching & Detaching Tool Heads:

1. Ensure the battery is removed before changing attachments.
2. Press the 'Unlocking Lever' on the main tool body.
3. Align the desired attachment head with the main body and push it firmly until it locks into place.
4. To detach, press the 'Unlocking Lever' and pull the attachment head off.

Иштөө нускамалары

Жалпы коопсуздук:

• Ар дайым коргоочу көз айнек, кол кап жана угууну коргоо сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
• Даярдоочу бөлүктүн бекем clamped or held before operation.
• Колдорду жана кенен кийимдерди кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Do not operate tools in wet conditions or near flammable materials.
• Always remove the battery before making adjustments, changing accessories, or storing the tool.

Impact Drill / Impact Screwdriver Operation:

1. Select the appropriate drill bit or screwdriver bit for your task.
2. Insert the bit into the Keyless Chuck (for drill) or Drive Bit Retaining Ring (for impact driver/screwdriver) and tighten securely.
3. Adjust the Torque Adjustment Ring to the desired setting (for drill).
4. Use the Low/High Speed Button to select the appropriate speed.
5. Press the Trigger to start the tool. Use the Direction Switch for forward or reverse.

Reciprocating Saw / Jigsaw Operation:

1. Select the correct blade for the material (wood, metal, etc.).
2. For Reciprocating Saw: Insert the blade into the Locking Ring and ensure it's secure.
3. For Jigsaw: Insert the blade into the Accessory Locking Lever and ensure it's secure.
4. Place the Shoe/Sole Plate firmly against the workpiece.
5. Press the Trigger to start cutting.

Circular Saw Operation:

1. Ensure the correct Circular Saw Blade is installed and secured.
2. Adjust the Guide Bar and Guard for desired cutting depth and angle.
3. Place the Sole Plate on the workpiece.
4. Press the Trigger to start the saw and guide it along the cutting line.

Chainsaw Operation:

1. Ensure the 4" Chain is properly tensioned and lubricated (if applicable). Tension can be adjusted with a screwdriver.
2. The Chainsaw attachment features a separate safety switch that must be pressed for operation.
3. Куралды эки колуңуз менен бекем кармаңыз.
4. Press the safety switch and then the main trigger to begin cutting.

Grass Mover & Hedge Trimmer Operation:

1. Select either the short blade (for grass in hard-to-reach areas) or the long blade (for hedges/shrubs).
2. Attach the desired blade securely using the Blade Release Button.
3. Ensure the Safety Lock-off is disengaged before pressing the On/Off Switch.
4. Hold the tool firmly and guide it along the area to be trimmed.

Sander / Multi-tool Operation:

1. Attach the appropriate sanding pad or multi-tool accessory.
2. Ensure the accessory is securely fastened using the Accessory Locking Lever or Accessory Drive Spindle.
3. Place the tool on the workpiece and press the Trigger to begin sanding or cutting/scraping.

Техникалык тейлөө

Жалпы тазалоо:

• Тазалоодон мурун дайыма батареяны ажыратыңыз.
• Wipe down the tool body and attachments with a clean, damp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
• Remove any sawdust, debris, or grime from vents and moving parts.

Blade and Accessory Care:

• Inspect blades and accessories regularly for wear, damage, or dullness. Replace as needed.
• Keep blades sharp for optimal performance and safety.
• For chainsaw, ensure the chain is properly tensioned and lubricated according to manufacturer recommendations.

Батареяга кам көрүү:

• Батареяларды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Батареяларды заряды түгөнгөн абалда узак убакытка сактабаңыз.
• Батареяларды биринчи колдонуудан мурун жана ар бир колдонуудан кийин толук заряддаңыз.

Проблемаларды чечүү

Курал башталбай жатат:

• Батарея толук заряддалганын жана туура салынганын текшериңиз.
• Check if the safety lock-off (if present on the attachment) is disengaged.
• Verify that the attachment is correctly secured to the main body.

Төмөндөтүлгөн аткаруу:

• Батарея зарядынын деңгээлин текшериңиз.
• Ensure blades/bits are sharp and not worn.
• Clean any debris from the tool and attachment.

Ашыкча титирөө же ызы-чуу:

• Ensure all attachments and accessories are securely fastened.
• Ар кандай бош же бузулган бөлүктөрүн текшериңиз.

Техникалык шарттар

Колдонуучу сунуштар

• Батарея шайкештиги: The main tool body is compatible with both NEWONE 20V MAX Lithium-Ion batteries and Makita 18V Lithium-Ion batteries, offering flexibility if you own other tools from these brands.
• Jigsaw Visibility: When using the Jigsaw, sawdust can accumulate and obscure the cutting line. It is recommended to frequently clear the sawdust or use a vacuum attachment (if available) to maintain clear visibility for precise cuts.
• Sander Vibration: The sander attachment can produce strong vibrations. Ensure a firm grip and take breaks during extended use to prevent fatigue.

Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the official NEWONE product webсайтка же сатуучуга кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.