Колдонмолор+

WinAPEX ET8101/ET8102

WINAPEX 6000 Counts Digital Multimeter User Manual

Моделдер: ET8101 / ET8102

Brand: WinAPEX

1. Бүттүview

The WINAPEX 6000 Counts Digital Multimeter is a pocket-sized 3 5/6-bit automatic digital instrument designed for stable performance, high precision, and clear, reliable readings with overload protection. Powered by AAA 1.5V batteries, it features a large-screen LCD display with high brightness backlight, even in low battery conditions. The backlight can be automatically turned off after 15 seconds to conserve power. This series of instruments is versatile, capable of measuring DC voltage, AC томtage, DC current, AC current, resistance, capacitance, diode, continuity, zero fire wire judgment, frequency, and True RMS. The ET8102 model specifically includes temperature measurement functionality, while the ET8101 does not. It is an ideal tool for use in laboratories, factories, and by radio enthusiasts and families.

WINAPEX ET8102 Digital Multimeter showing various functions like AC/DC voltage, current, temperature, capacitance, diodes, continuity, data hold, backlight, frequency, NCV, and duty cycle.
WINAPEX ET8102 Digital Multimeter highlighting its various measurement functions.

2. Коопсуздук чаралары

This instrument is designed to comply with IEC1010 safety standards. Please read the following precautions carefully before use:

  1. Көлөмдү өлчөгөндөtage, do not exceed the limit voltage of DC 1000V or AC 750V RMS.
  2. Тtages below 36V are considered safe. When measuring above 36V DC or 25V AC, ensure test leads have reliable contact, are correctly connected, and have proper insulation to prevent electric shock.
  3. When changing functions or ranges, ensure the test leads are removed from the test point.
  4. Always select the correct function and range to prevent accidental operation. While the instrument has full-range protection, caution is advised.
  5. When measuring current, do not input more than 10A.
  6. Коопсуздук белгисинин сүрөттөлүшү:
    • !: Indicates dangerous voltage.
    • ⏚: Ground.
    • ☐: Double insulation.
    • △: Operator must refer to the instruction manual.
    • ⎕: Төмөн көлөмtage символу.

3. Орнотуу

3.1. Батареяны орнотуу

The multimeter requires AAA 1.5V batteries (not included). To install or replace batteries:

  1. Мультиметрдин артындагы батарея бөлүкчөсүн табыңыз.
  2. Батареянын капкагын ачыңыз.
  3. Insert the AAA 1.5V batteries, ensuring correct polarity as indicated inside the compartment.
  4. Батареянын капкагын бекем жабыңыз.
Back of the multimeter with the battery compartment open, showing where to insert batteries.
Battery compartment for AAA 1.5V batteries.

3.2. Сыноо линияларын туташтыруу

Before performing any measurements, ensure the test leads are correctly connected to the multimeter:

  • Кара сыноо өткөргүчтү орнотуңуз

    Тектеш документтер - ET8101/ET8102

    Preview WinAPEX 268 сериясындагы санариптик Clamp Метрдин колдонуучусу
    WinAPEX 268A, 268B жана 268C санариптик клапандары үчүн кеңири колдонуучу колдонмосуamp метрлер, анын ичинде функциялар, спецификациялар, коопсуздук чаралары, өлчөө жол-жоболору жана бузулууларды оңдоо.
    Preview WinAPEX 9999counts чөнтөк санариптик мультиметр Колдонуучунун колдонмосу (ET8104)
    WinAPEX 9999counts чөнтөк санариптик мультиметри (ET8104 модели) үчүн колдонуучунун колдонмосу. Бул жогорку тактыктагы колго жүрүүчү аспаптын эксплуатациясы, коопсуздугу, техникалык мүнөздөмөлөрү жана бузулууларды жоюу боюнча ар тараптуу жетекчиликти камсыз кылат.
    Preview ET8201, ET8202, ET8203 Intelligent Clamp Meters | WinAPEX
    Бүттүview of WinAPEX ET8201, ET8202, and ET8203 intelligent clamp meters, detailing features like AC/DC voltage, current, resistance, capacitance, temperature, NCV, True RMS, and more.