Godox FT-16 Wireless Studio Flash Trigger

Introduction

The Godox FT-16 Wireless Studio Flash Trigger is a versatile system designed for remote control and triggering of compatible studio flashes and camera flashes. It offers sensitive reactions and stable signal transmission, making it an essential tool for creative photography. This system supports flash grouping and remote power control, and is compatible with various Godox flash series including QT, Gemini GT & GS, DP/DE, and WITSTRO flashes, as well as Godox Cells series Transceivers.

Image: Godox FT-16 Transmitter and multiple FTR-16 Receivers, showcasing толук комплект.

Продукт бүттүview

The FT-16 system provides comprehensive control over your flash units, enhancing flexibility in your lighting setups.

Негизги өзгөчөлүктөрү:

• Зымсыз башкаруу: Remotely adjust flash power (on/off), power level, modeling light (on/off), buzzer (on/off), and trigger flashes.
• Алыстан кубаттуулукту жөндөө: Each flash group can be set to 16 different power levels for precise lighting control.
• Flash Grouping: Fire up to 16 groups of flashes independently for complex and creative lighting scenarios.
• One-for-Multiple: Flexible combinations of one transmitter controlling multiple receivers.
• Power Display Modes: Supports two power display modes (5.0-10.0 or 1/1-1/128).
• Кеңейтилген диапазон: Operates effectively up to 50 meters (164 feet) in open areas.
• High Sync Speed: Achieves a maximum sync speed of 1/250 seconds.
• Чоң LCD дисплей: The transmitter features a clear LCD for easy monitoring of settings.
• Special Receiver Design: Compact, battery-free receiver powered directly by the flash unit, offering stronger interference capability.

Пакеттин мазмуну

The Godox FT-16 system is available in different configurations:

• 1 to 1 Set:
  • 1 x FT-16 Transmitter
  • 1 x FTR-16 Receiver
  • 1 x User Manual
• 1 to 2 Set:
  • 1 x FT-16 Transmitter
  • 2 x FTR-16 Receivers
  • 1 x User Manual
• 1 to 3 Set:
  • 1 x FT-16 Transmitter
  • 3 x FTR-16 Receivers
  • 1 x User Manual

Please verify the contents of your package against your purchase order.

Орнотуу жана орнотуу

1. Өткөргүчтүн батареясын орнотуу

1. Locate the battery compartment on the back of the FT-16 Transmitter.
2. Батареянын капкагын жылдырыңыз.
3. Insert two (2) AA Ni-MH or alkaline batteries, ensuring correct polarity. (Batteries are not included).
4. Батареянын капкагын бекем жабыңыз.

Image: FT-16 Transmitter with its battery compartment open, next to an FTR-16 Receiver.

2. Receiver Connection to Flash

1. Identify the wireless control port on your compatible flash unit (e.g., Godox QT, Gemini GT/GS, DP/DE series).
2. Plug the FTR-16 Receiver's USB-like connector firmly into this port. The receiver draws power directly from the flash unit, so no separate batteries are required for the receiver.

Image: FTR-16 Receiver, showing its connection port for compatible flash units.

3. Transmitter Mounting to Camera

1. Slide the FT-16 Transmitter onto your camera's hot shoe. Ensure it is securely seated.
2. The FT-16 is compatible with single-point hot shoe cameras from brands like Canon, Nikon, Pentax, Sony, Minolta, Olympus, and Panasonic.

4. Channel Synchronization

1. On both the FT-16 Transmitter and each FTR-16 Receiver, locate the channel switches (labeled 1, 2, 3, 4).
2. Set these switches to the exact same position on all units you intend to use together. This ensures proper communication and prevents interference from other wireless systems.

Image: Close-up of the FT-16 Transmitter and FTR-16 Receiver, highlighting the channel switches and power dials.

Иштөө нускамалары

1. Күйгүзүү

• The Transmitter powers on automatically once batteries are inserted and it's mounted on the camera.
• The Receiver powers on automatically when correctly connected to a powered-on flash unit.

2. Adjusting Flash Power

• Use the 'POWER' dial on the FT-16 Transmitter to adjust the output level of the connected flashes.
• The LCD display on the transmitter will show the current power setting, which can be displayed as 5.0-10.0 or 1/1-1/128, depending on the selected display mode.

3. Flash Grouping

• Each FTR-16 Receiver has a dial (labeled A-F) to assign it to a specific group.
• To control flashes in different groups independently, set each receiver to a unique group (A, B, C, etc.).
• On the FT-16 Transmitter, select the desired group to adjust its power or trigger it.

4. Controlling Flash Functions

• SET баскычы: Used to confirm selections or enter settings menus (if applicable).
• BUZZ баскычы: Toggles the flash unit's audible beep (buzzer) on or off.
• LAMP Баскыч: моделдештирүүнү башкаратamp or AF-assist beam on/off for compatible flashes.

5. Test Fire

• Press the 'TEST' button on the FT-16 Transmitter to manually trigger all synchronized flashes. This is useful for checking your lighting setup before taking a shot.

Техникалык тейлөө

• Тазалоо: Өткөргүчтүн жана кабыл алгычтардын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Катуу химиялык заттарды же абразивдүү материалдарды колдонуудан алыс болуңуз.
• Сактагыч: When not in use for extended periods, remove the batteries from the transmitter to prevent leakage. Store the units in a cool, dry place, away from direct sunlight and extreme temperatures.
• Колдонуу: Handle the units with care. Avoid dropping them or subjecting them to strong impacts, which can damage internal components.
• Нымдуулук: Keep the units away from water and high humidity. They are not waterproof.

Проблемаларды чечүү

Flashes Not Triggering:

• Батареяларды текшерүү: Ensure fresh batteries are correctly installed in the FT-16 Transmitter.
• Алуучу туташуусу: Verify that the FTR-16 Receiver is securely plugged into the flash unit's wireless control port and that the flash is powered on.
• Channel Match: Double-check that the channel switches on both the transmitter and all receivers are set to the exact same position.
• Өткөргүч орнотуу: Ensure the transmitter is properly seated on the camera's hot shoe.
• Иштөө аралык: Confirm you are within the effective operating range of 50 meters (164 feet). Obstacles can reduce this range.
• Flash Functionality: Ensure the flash unit itself is functioning correctly when triggered manually.

Ыйгарымсыз триггер:

• Аралыкты кыскартуу: Try reducing the distance between the transmitter and receivers.
• Интерференция: Check for potential sources of wireless interference (e.g., Wi-Fi routers, other wireless devices) in the environment.
• Батарея деңгээли: Low battery in the transmitter can lead to inconsistent performance. Replace with fresh batteries.

Power Adjustment Not Working:

• Group Assignment: Confirm that the receiver is correctly assigned to a group (A-F) and that the corresponding group is selected on the transmitter for adjustment.
• Flash Compatibility: Ensure your specific flash unit supports remote power adjustment via its wireless control port.

Техникалык шарттар

Колдонуучу сунуштар

• Pre-Shoot Testing: Always perform a test fire of your flash setup before a critical shoot to ensure all units are communicating correctly and power levels are as desired.
• Understanding Power Display: Familiarize yourself with both power display modes (5.0-10.0 and 1/1-1/128) to quickly adjust settings based on your preference or flash unit's native display.
• Батареянын иштөө мөөнөтү: Keep spare AA batteries for the transmitter on hand, especially during long shooting sessions, as low battery can affect performance.
• Экологиялык факторлор: Be aware that dense environments or areas with high radio frequency interference can reduce the effective range of the trigger.

Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the authorized Godox dealer or K SALFOTO Store directly. Keep your proof of purchase for any warranty claims.