1. Коопсуздук боюнча маанилүү маалымат
⚠️ Эскертүү: It is illegal to ride electric scooters on public roads, pavements, or cycle paths in many regions. This product is intended only for use on private land with the owner's permission. Always check local regulations before use.
Please read this manual thoroughly before installation and use. Improper installation or use can lead to damage to the product, scooter, or personal injury.
2. Продукт бүтүп калдыview
This document provides instructions for the 48V 21A Intelligent Brushless Motor Controller, designed as a replacement part for M4pro Electric Scooters. This controller manages the power delivery to the scooter's brushless motor, ensuring efficient and responsive operation.
Figure 1: The 48V 21A Intelligent Brushless Motor Controller with its wiring connections.
Видео 1: Продукт бүттүview and visual details of the controller.
3. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | SPORTARC |
| Модель номери | YKYJ06DFOC01-A |
| Шайкештик | M4pro Electric Scooter |
| Тtage | DC 48V |
| Учурдагы | 21A |
| Тормоз түрү | Төмөн деңгээл |
| Low Voltage Коргоо | 39V |
| Материал | Металл + Пластик |
| Түс | Silver |
| Өлчөмдөрү (L x W x Y) | 10.5 x 7 x 3.5 см |
| Салмагы | 240г |
2-сүрөт: Негизги мүнөздөмөлөрдү көрсөткөн контроллердин этикеткасы.
4. Орнотуу боюнча колдонмо
Эскертүү: Installation of an electric scooter controller requires basic electrical knowledge and tools. If you are unsure, it is highly recommended to seek professional assistance to avoid damage or injury.
4.1 Баштоодон мурун
- Ensure the scooter is powered off and the battery is disconnected.
- Gather necessary tools (e.g., screwdrivers, wire cutters, electrical tape, multimeter).
- Familiarize yourself with the existing wiring of your M4pro scooter.
4.2 Зымдарды туташтыруу
The controller features multiple color-coded wires and connectors. Carefully match each connector from the new controller to the corresponding connector on your scooter. Refer to the image below for a visual guide to the various connections.
3-сүрөт: Детальдуу view of the controller's wiring harness.
Common connections typically include:
- Электр кабелдери: Thick red and black wires (often with XT60 or similar connector) for battery connection.
- Мотор фазасынын зымдары: Three thick wires (e.g., yellow, green, blue) connecting to the motor.
- Холл сенсорунун зымдары: A thinner multi-wire connector for motor position sensing.
- Throttle/Accelerator: Connector for the speed control.
- Тормоз рычагдары: Connectors for brake signal input (low level).
- Дисплей/Башкаруу панели: Connector for the scooter's display unit.
- Lights/Horn: Auxiliary power connections.
- Self-Learning Wires: Often two white wires that, when connected briefly, allow the controller to learn motor parameters.
Ensure all connections are secure and properly insulated. Incorrect wiring can cause damage to the controller, motor, or battery.
4.3 Орнотуудан кийинки текшерүү
- Бардык туташуулардын бекемдигин жана туура полярдуулукту эки жолу текшериңиз.
- Батареяны кайра туташтырыңыз.
- Perform a low-speed test in a safe, open area to ensure proper function of the motor, throttle, and brakes.
5. Иштөө нускамалары
Once correctly installed, the controller operates automatically to manage the electric scooter's motor. Its intelligent design ensures smooth acceleration and efficient power usage based on throttle input and other sensor data.
- Күйгүзүү/өчүрүү: The controller powers on/off with the scooter's main power switch.
- Ылдамдатуу: Use the scooter's throttle to control speed. The controller will translate your input into motor power.
- Тормоздоо: Activating the scooter's brake levers will send a low-level signal to the controller, which will cut power to the motor and engage braking.
- Low Voltage Коргоо: The controller is designed to protect the battery by cutting power when the voltage drops below 39V, preventing over-discharge.
6. Техникалык тейлөө
Мотор контроллериңиздин узак иштөөсүн жана оптималдуу иштешин камсыз кылуу үчүн:
- Кургак кармоо: Protect the controller from water and excessive moisture. While the casing бир аз коргоону сунуштайт, ал толугу менен суу өткөрбөйт.
- Тазалык: Жылуулуктун таралышына таасир этүүчү чаң менен кирдин топтолушуна жол бербөө үчүн контроллердин сыртын мезгил-мезгили менен тазалап туруңуз.
- Байланыштарды текшерүү: Regularly check all wiring connections for any signs of looseness, corrosion, or damage. Secure any loose connections.
- Ашыкча ысып кетүүдөн сактаныңыз: Ensure the controller has adequate airflow. Avoid covering it or operating the scooter in conditions that lead to excessive heat buildup.
7. Кыйынчылыктарды
If you experience issues with your scooter after installing the new controller, consider the following:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Скутер күйбөйт. | Loose battery connection, faulty power switch, low battery voltage. | Check battery connections, ensure battery is charged, test power switch. |
| Motor not responding to throttle. | Loose throttle connection, faulty throttle, incorrect motor phase/Hall sensor wiring. | Verify throttle and motor wiring. If applicable, perform self-learning procedure. |
| Motor runs intermittently or with unusual noise. | Loose motor phase wires, damaged Hall sensors, motor fault. | Check motor wiring. Consult a professional if the issue persists. |
| Brakes not engaging. | Loose brake lever connection, faulty brake lever. | Inspect brake lever wiring and functionality. |
| Контроллер өтө ысып кетет. | Overload, poor ventilation, short circuit. | Reduce load, ensure proper airflow, check for short circuits in wiring. |
If troubleshooting steps do not resolve the issue, please contact customer support or a qualified technician.
8. Колдонуучунун кеңештери
- Шайкештикти эки жолу текшерүү: Always confirm that the controller's voltage and current ratings match your scooter's motor and battery specifications before purchase and installation.
- Зымдарды уюштуруу: When replacing the controller, take photos of the original wiring setup. This can be a valuable reference during installation.
- Коопсуз орнотуу: Ensure the controller is securely mounted within the scooter's housing to prevent vibrations and physical damage.
- Баштапкы сыноо: After installation, lift the scooter's drive wheel off the ground and perform a gentle throttle test to confirm basic functionality before riding.
9. Кепилдик жана колдоо
Кепилдик жөнүндө маалымат алуу же техникалык колдоо алуу үчүн, сатып алуу платформаңыз аркылуу сатуучуга түздөн-түз кайрылыңыз. Тез жардам алуу үчүн буйрутмаңыздын номерин жана көйгөйдүн толук сүрөттөмөсүн бериңиз.
