Anern Hybrid Solar Inverter Instruction Manual

1. Introduction and Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Anern Hybrid Solar Inverter. The Anern Hybrid Solar Inverter is a pure sine wave inverter designed for off-grid solar systems, capable of running with or without a battery (note: low power inverters of 3.2KW and below require battery connection for use). It features a built-in MPPT solar charge controller and offers multiple charging and output modes to suit various application requirements.

The AN-SCI-MAX series includes models up to 10.2KW, while the AN-SCI-ECO series covers models up to 6.2KW. Both series are designed for efficiency and reliability in managing solar power.

2. Коопсуздук маалыматы

WARNING: This is an off-grid inverter. Please read all safety instructions carefully before installation and operation.

• Low power inverters (3.2KW and below) must be connected to batteries for proper operation.
• The starting power of inductive loads should be at least three times the inverter's rated power to prevent damage.
• Ensure all circuits are connected correctly and install appropriate circuit breakers for each circuit.
• Always follow the correct power-on and power-off sequence.

Power On Order:

1. First, turn on the battery.
2. Инверторду иштетиңиз.
3. Then, turn on the circuit breakers for photovoltaic (PV), mains, and load.

Power Off Order (Reverse of Power On):

1. First, turn off the circuit breakers for load, mains, and photovoltaic (PV).
2. Инверторду өчүрүңүз.
3. Finally, turn off the battery.

3. Продукциянын өзгөчөлүктөрү

The Anern Hybrid Solar Inverter offers a range of advanced features for efficient solar power management:

• Таза синус толкунунун чыгышы: Provides high-quality and stable AC current, compatible with most loads, protecting electrical devices and extending their service life.
• Батареясыз иштөө: Capable of running without a battery (for models above 3.2KW). For battery-free operation, the solar module voltage must exceed 360V DC.
• One-Key Factory Reset: Convenient function for restoring default settings.
• PV Automatic Lithium Battery Activation: Solar input can automatically activate lithium batteries.
• Integrated MPPT Solar Controller:
• 160A MPPT solar controller for 10.2KW models.
• 120A MPPT solar controller for AN-SCI-ECO series.
• High Solar Input Power: Max 7500W (for 4.2KW) & 10800W (for 6.2KW) solar charge.
• Wide PV Input Voltage диапазону: 90-450VDC for AN-SCI-MAX, 60-450VDC for AN-SCI-ECO.
• Anti-Dust Kit: Built-in for enhanced durability in harsh environments.
• Smart Battery Charge Design: Optimizes battery lifespan.
• Dual PV Input & AC Output (10.2KW models):
• Two independent MPPTs for convenient solar panel wiring and reduced need for sink boxes.
• Dual AC output with primary and secondary circuits. If PV and mains are absent and battery voltage is low, the primary circuit shuts down, and only the secondary output is maintained (Super Power Saving mode).
• WIFI Monitoring: Available for iOS and Android systems, allowing remote system control and monitoring.
• Шайкеш батареянын түрлөрү: Supports Lead-acid, Lithium iron phosphate (LiFePO4), Gel, AGM, FLD, SLD, and user-defined battery types.
• Touch Button & LED Display: User-friendly interface for monitoring and control.

4. Пакеттин мазмуну

Таңгактан чыгаргандан кийин, бардык буюмдар бар экенин жана бузулбаганын текшериңиз:

• Anern Hybrid Solar Inverter Unit
• Колдонуучунун Колдонмосу (бул документ)
• Байланыш кабели (эгер бар болсо)
• Орнотуу жабдуулары (эгер бар болсо)
• PV Cover (if applicable)

5. Орнотуу жана орнотуу

Proper installation is crucial for the safe and efficient operation of your inverter. Refer to the system diagram and port overview байланыштар үчүн.

5.1 Системалык диаграмма

The inverter connects to solar panels, an optional generator, utility grid, external battery packs, and powers home appliances. Ensure all connections are secure and correctly polarized.

5.2 Продукт бүттүview жана портту аныктоо

Key components and ports:

1. LCD дисплей
2. Статус көрсөткүчү
3. Заряддоо көрсөткүчү
4. Ката көрсөткүчү
5. Функция баскычтарына тийүү
6. Күйгүзүү/өчүрүү
7. AC киргизүү
8. Негизги чыгаруу
9. Экинчи чыгаруу
10. PV1 жана PV2 киргизүү
11. RS-232/WIFI/ ЖК байланыш портун алып салуу
12. Батарея киргизүү
13. Чаңга каршы комплект

5.3 Connection Guidelines

• PV киргизүү: Connect solar panels to PV1 and PV2 inputs (10). Ensure PV input voltage is within the specified range (90-450VDC for AN-SCI-MAX, 60-450VDC for AN-SCI-ECO).
• Батарея туташуу: Connect battery bank to Battery input (12). Observe correct polarity (+/-). Remember, low power inverters (3.2KW and below) require battery connection.
• AC киргизүү: Connect utility grid to AC input (7).
• AC чыгаруу: Connect main loads to Main output (8) and secondary loads to Second output (9).
• Байланыш: Use the RS-232/WIFI/Remove LCD communication port (11) for monitoring and control via WIFI.

Refer to the Safety Information section for the correct power-on and power-off sequence.

6. Иштөө нускамалары

The inverter features an intuitive LCD display and touch buttons for easy operation and monitoring.

6.1 Дисплей жана башкаруу элементтери

The LCD display (1) shows real-time system status, including input/output voltage, current, power, and battery status. Use the touch function buttons (5) to navigate menus, adjust settings, and view ар кандай параметрлер.

6.2 Кубат менен камсыздоо режимдери

The inverter supports three priority power supply modes:

1. Коммуналдык кызмат көрсөтүүлөрдүн артыкчылыгы: The inverter primarily uses utility power, with solar and battery as backup.
2. Solar Panel Priority: The inverter prioritizes solar power, using utility or battery as backup when solar is insufficient.
3. Battery Priority: The inverter prioritizes battery power, using solar or utility as backup.

6.3 WIFI Monitoring

Utilize the built-in WIFI module to monitor and control your inverter system via a mobile application (available for iOS and Android). This allows for remote access to system data and settings.

7. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your Anern Hybrid Solar Inverter.

• Тазалоо: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup. The built-in anti-dust kit helps, but regular cleaning is still recommended.
• Байланыштары: Regularly check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
• Батареянын ден соолугу: Монитор батареянын көлөмүtage and charge cycles. The smart battery charge design helps optimize battery lifespan, but proper battery care is essential.
• Программалык камсыздоонун жаңыртуулары: Өндүрүүчүнү текшериңиз website or app for any available firmware updates to ensure your inverter has the latest features and bug fixes.
• Экологиялык шарттар: Ensure the inverter is installed in a well-ventilated area, free from excessive heat, moisture, and direct sunlight.

8. Кыйынчылыктарды

If you encounter issues with your inverter, refer to the following basic troubleshooting steps. For more complex problems, contact customer support.

• Кубат жок/Дисплей өчүк:
• Check the power on/off switch (6).
• Батарея туташууларын жана тtage.
• Ensure AC input is present if operating in utility-dependent modes.
• Чыгуу күчү жок:
• Check circuit breakers for PV, mains, and load.
• Verify load connections.
• Check for fault indicators (4) on the display.
• кубаттоо маселелери:
• Ensure solar panels are connected correctly and receiving sufficient sunlight.
• Фотоэлектрдик киргизүүнүн көлөмүн текшерүүtage диапазону.
• Verify battery type settings are correct for your connected battery.
• Overload/Overheating:
• Туташкан жүктү азайтыңыз.
• Инвертордун айланасында жетиштүү желдетүүнү камсыз кылыңыз.
• Check for blockages in the anti-dust kit (13) or vents.
• Communication Issues (WIFI):
• Ensure the WIFI module is properly connected.
• Тармак туташууңузду текшериңиз.
• Инверторду жана мобилдик түзмөгүңүздү кайра иштетиңиз.

Always refer to the LCD display for specific error codes or warnings, which can help diagnose the problem.

9. Техникалык шарттар

Below are the general specifications for the Anern AN-SCI-MAX-10200 model. Specifications may vary slightly between different models (e.g., 6.2KW, 4.2KW, 3.2KW, 2KW) and configurations (with/without WIFI).

10. Кепилдик жана колдоо

Anern is committed to providing high-quality products and customer satisfaction. Your inverter comes with certain guarantees and support services:

• Акысыз кайтаруу: Жеткирилгенден кийин 15 күндүн ичинде акысыз кайтарып алуудан ырахат алыңыз.
• Тез жеткирүү кепилдиги: Жеткирүү кечигип калса, сиз $1.00 купон кодун алууга укуктуу болушуңуз мүмкүн.
• Маселелер үчүн төлөмдү кайтаруу: Refunds are provided if the package is lost or items are damaged during transit.
• No Delivery Refund: A full refund is available if the item is not delivered within 20 days.

For technical support, warranty claims, or any other inquiries, please contact your seller or refer to the official Anern webбайланыш маалыматы үчүн сайт.