XTOOL Anyscan A30D BT OBD2 Scanner Instruction Manual

1. Киришүү

The XTOOL Anyscan A30D V2.0 is a powerful Bluetooth-enabled OBD2 diagnostic scanner designed for comprehensive vehicle analysis. It inherits the robust features of previous A30 models and introduces new capabilities like CAN FD and FCA protocol support, along with a built-in battery voltage display and flashlight function. This tool provides lifetime free software updates, ensuring you always have access to the latest diagnostic developments and vehicle coverage.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Өмүр бою акысыз программалык камсыздоо жаңыртуулары: No subscription fees for all functions.
• Толук системалык диагностика: Accesses all available system modules (Engine, ABS, SRS, Transmission, etc.).
• Bi-directional Control & Active Tests: Perform various active tests to check component integrity.
• 19+ Hot Service Resets: Solve common maintenance tasks.
• Full 10 Mode OBD2 Functions: Comprehensive engine diagnostics.
• CAN FD & FCA AutoAuth Support: Broader compatibility for newer vehicles.
• 8-in-1 Live Data Graphing: Detailed real-time data analysis.
• Батарея Voltage Display & Flashlight: Added convenience for users.
• Көп тилдүү колдоо: Over 22 languages available.

2. Орнотуу колдонмосу

Follow these steps to set up your XTOOL Anyscan A30D V2.0 scanner:

2.1. Колдонмону жүктөп алуу жана орнотуу

• iOS түзмөктөрү үчүн: Download the "Anyscan" App from the Apple App Store.
• Android түзмөктөрү үчүн: Download the "Anyscan" App from Google Play or the official XTOOL website (Support -> Download APP -> Anyscan).

2.2. Каттоо жана активдештирүү

Locate the Serial Number (S/N) and activation code on the quality certificate included with your device. Open the Anyscan app and follow the prompts to register your account and activate the dongle.

2.3. Connecting to Your Vehicle

1. Plug the A30D V2.0 interface adapter into your vehicle's OBD2 Port. The device will light up (red light for power supply). The built-in flashlight can assist in locating the port in dark areas.
2. Унааңыздын от алдыргычын күйгүзүңүз.

2.4. Bluetooth Жупташтыруу

• iOS түзмөктөрү үчүн: Go to both the Anyscan app's Bluetooth settings and your device's system Bluetooth settings to pair with the A30D V2.0.
• Android түзмөктөрү үчүн: Only use the Bluetooth settings within the Anyscan app to pair with the A30D V2.0.

Once connected, the device's indicator lights will change (e.g., blue for Bluetooth, green for communication).

3. Иштөө нускамалары

After successful setup and connection, you can begin diagnosing your vehicle using the Anyscan app.

3.1. Толук системаны диагностикалоо

The A30D V2.0 can access and diagnose all available electronic control units (ECUs) in your vehicle. This includes, but is not limited to, Engine, ABS, SRS (Airbag), Transmission, TPMS (Tire Pressure Monitoring System), SAS (Steering Angle Sensor), BMS (Battery Management System), EPB (Electronic Parking Brake), Chassis, and Air Conditioning systems.

• Check Engine System: Reads fault codes, identifies the cause of the check engine light, and displays live data streams.
• ABS системасы: Retrieves DTCs, views live data, and offers you specific info of pending codes.
• SRS системасы: Reads SRS information to detect problems and ensure driving safety.
• Трансмиссия системасы: This car Bluetooth diagnostic tool reads diagnostic codes from the transmission system and detects whether the car’s speed and load match its transmission’s power output.

Within each system, you can typically perform the following actions:

• Кыйынчылык коддорун окуңуз: Displays detailed DTC information.
• Көйгөй коддорун өчүрүү: Clears DTCs and other data from the ECU, turning off warning lights.
• ECU маалымат: Provides detailed information about the ECU.
• Жандуу маалыматтар: Retrieves and displays real-time data and parameters from the vehicle's ECU.

3.2. Bi-directional Control & Active Tests

This function allows you to send commands to vehicle systems and components to test their operational status directly from the scanner, without using the vehicle's controls. This significantly speeds up troubleshooting and helps identify malfunction causes efficiently.

Exampактивдүү тесттердин түрлөрү төмөнкүлөрдү камтыйт:

• Turning on the radiator fan
• Дросселди модуляциялоо
• Терезелерди ачуу/жабуу
• Күзгүлөрдү иштетүү
• Turning on/off lights or the sound horn
• Testing door locks
• EVAP system tests
• ABS auto-bleed
• A/C Configuration
• Adaptive Headlamp Тууралоо
• Mirrors Folding/Unfolding
• Interior lights / Inside mirrors / Steering wheel heating

3.3. Special Functions (19+ Hot Service Resets)

The A30D V2.0 offers over 19 special reset and maintenance functions to address common vehicle service needs. These functions are continuously updated and expanded.

• Майды калыбына келтирүү: Resets service intervals after an oil change and turns off the oil light.
• EPB баштапкы абалга келтирүү: Resets brake pads after replacement of the brake system.
• SAS баштапкы абалга келтирүү: Performs calibration of the steering angle sensor.
• BMS баштапкы абалга келтирүү: Registers a new battery to the ECU after replacement.
• ABS кан агуу: Cycles the ABS pump to bleed air out of the ABS module for firm brake pedals.
• Инжектор коддоо: Codes injectors after replacement.
• Дроссельди кайра үйрөнүү: Initializes throttle actuators to return "learned" values to the default state.
• Crank Sensor Relearn (Tooth Learning): Learns crankshaft tooth machining tolerance for accurate engine misfire diagnosis.
• DPF/GPF Reset Service: Regenerates Diesel/Gasoline Particulate Filters to clear PM and stabilize performance.
• TPMS баштапкы абалга келтирүү: Relearns TPMS sensors so new sensors are recognized by the ECU.
• Gearbox Match (Transmission/Gearbox Matching): Resets adaptive shifting points in the automatic Transmission Control Unit.
• Коопсуздук жаздыкчасын оңдоо: Resets Airbag data and clears collision data after replacement.
• Tire Upgrade (Tire Pressure Reset): Resets tire pressure and turns off the tire pressure MIL after tire-related changes.
• Орунду калибрлөө: Matches seats with memory function after replacement or repair.
• ECU Control Unit Reset: Restores ECU parameters to factory default settings.
• Терезени инициализациялоо: Performs door window matching to recover ECU initial memory and automatic ascending/descending function.
• Люкту баштапкы абалга келтирүү: Similar to window initialization for sunroofs.
• GPF Reset: (Gasoline Particulate Filter) Similar to DPF reset.
• Camshaft Learning: Helps remove the engine or timing belt after replacing the ckp sensor or ECU.

3.4. Full 10 Mode OBD2 Functions

The A30D V2.0 provides comprehensive OBD2 functionality for all cars manufactured after 1996.

1. Түз эфирдеги маалыматтарды окуңуз: Reads and displays live ECU/PCM data stream, plotting functions graphically.
2. Кадрдын маалыматтарын тоңдурууну окуу: Records specific vehicle conditions when an emission-related fault occurs.
3. Read DTCs (Diagnostic Trouble Codes): Shows detailed descriptions of DTCs.
4. DTCлерди тазалоо: Turns off Check Engine Light (MIL), clears codes, and resets monitors.
5. Oxygen Sensor Monitoring: Алып чыгууга мүмкүндүк берет жана viewO2 сенсорунун мониторунун сыноо жыйынтыктарын чыгаруу.
6. Системанын мониторинги: Checks whether various emissions-related systems are operating properly.
7. Read Pending DTCs: Displays diagnostic trouble codes that have not yet confirmed a malfunction.
8. Control Operation of On-Board System (Component Test): Actuates certain vehicle components by commands from the scanner to test their operability.
9. Унаа жөнүндө маалыматты окуу: VIN (унаанын идентификациялык номери), CID (калибрлөө ID) жана CVN (калибрлөөнү текшерүү номери) көрсөтөт.
10. DTC издөө китепканасы: Provides direct definitions of OBD2 fault codes, including descriptions, causes, and maintenance suggestions.

3.5. Live Data Graphing

The A30D V2.0 allows you to read and display vehicle live data in an 8-in-1 graphical format. You can customize specific PIDs (Parameter IDs) and merge graphs for up to 8 data PIDs simultaneously, providing a comprehensive view of your car's health status and aiding in the analysis of abnormal parameters.

3.6. FCA AutoAuth & CAN FD Protocols

The A30D V2.0 supports FCA AutoAuth for main FCA vehicles (Fiat, Chrysler, Dodge, Jeep, etc.) manufactured after 2018. This allows the scanner to communicate with the FCA Authentication System, bypassing the need for a bypass cable for diagnostics and bi-directional controls. Note that a personal AutoAuth account and active subscription may be required for full access to FCA's Secure Gateway Module.

It also features built-in CAN FD protocol support, making it compatible with the latest GM vehicles manufactured after 2020. CAN FD offers advantages such as shorter latency, more accuracy, better real-time performance, and higher bandwidth for efficient information transmission.

3.7. Отчет түзүү

The Anyscan A30D V2.0 automatically generates diagnostic reports after completing a car diagnostic session. These reports can be saved, shared via email, or printed as PDF files, providing a clear record of vehicle conditions and diagnostic findings.

4. Техникалык тейлөө

4.1. Программалык камсыздоону жаңыртуу

The XTOOL Anyscan A30D V2.0 comes with lifetime free software updates. These updates are released frequently to improve capabilities, expand vehicle coverage, and optimize the app/software. To update, access the "Updates" menu in the Anyscan app and select "Update All" to download the latest software versions.

4.2. Жалпы кам көрүү

• Аппаратты чаңдан жана нымдан таза, таза кармаңыз.
• Аппаратты колдонбогондо салкын, кургак жерде сактаңыз.
• Аппаратты жерге түшүрүүдөн же катуу таасирлерден сактаныңыз.
• Түзмөктү өз алдынча бөлүктөргө бөлүүгө же оңдоого аракет кылбаңыз, анткени бул кепилдикти жокко чыгарышы мүмкүн.

5. Кыйынчылыктарды

Бул жерде сиз кабылышы мүмкүн болгон жалпы маселелер боюнча чечимдер:

5.1. "VCI Connect Failed", "License Expired", or "Software Package Updated, but Update Interface Not Available"

These issues often indicate that the VCI (Vehicle Communication Interface) firmware version is too low. XTOOL technicians frequently optimize the firmware. If your firmware is not updated, it may cause communication problems.

Чечим: Upgrade the firmware version according to the video operation in the setup section. If the issue persists, please contact XTOOL support for assistance.

5.2. Automatic Scan Unsuccessful

If the automatic VIN scan fails to identify your vehicle, you may need to manually enter the vehicle information. If manual entry also faces issues, please contact XTOOL support with your 17-digit VIN number for technical assistance.

5.3. Missing Activation Code

If your activation code is missing, please send your device's Serial Number (S/N) to XTOOL support (xtooldirect@outlook.com) to retrieve it.

5.4. Language Switching Issues

When switching the language in the app, the factory presets the language and model software in English. After changing the language, you will need to re-download the model software in the corresponding new language. If the software prompts that a language is not supported, contact XTOOL support for authorization.

6. Техникалык шарттар

7. Колдонуучунун кеңештери

• Тилди өзгөртүү: Remember that after switching the app language, you need to re-download the specific vehicle model software in the newly selected language for it to function correctly.
• Шайкештикти текшерүү: Vehicle compatibility for specific functions can vary. If you are unsure, it is recommended to provide your vehicle's VIN (Vehicle Identification Number) to XTOOL support (xtooldirect@outlook.com) to check compatibility before attempting advanced operations.
• FCA AutoAuth: While the A30D V2.0 supports FCA AutoAuth, full access to the Secure Gateway Module for 2018+ FCA vehicles may require a separate personal AutoAuth account and active subscription.
• Программалык камсыздоо жаңыртуулары: Алдын алаtage of the lifetime free software updates to ensure your tool always has the latest vehicle coverage and diagnostic capabilities. Regularly check the "Updates" section in the app.

8. Кепилдик

The XTOOL Anyscan A30D V2.0 diagnostic tool comes with a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9. Колдоо

For technical assistance, compatibility inquiries, or any other support needs, please contact XTOOL's customer service:

• Электрондук почта: xtooldirect@outlook.com
• Тейлөө сааттары: 24 hours after-sales service is available.

When contacting support, please provide your device's Serial Number (S/N) and the operating system of your smart device (iOS/Android) for faster service.