Introduction
Thank you for choosing the POSEIDON Tattoo Machine Kit. This manual provides essential information for the safe and effective use of your new tattoo equipment. Please read it thoroughly before operation and keep it for future reference.
Комплекттин мазмуну
Your POSEIDON Tattoo Machine Kit (Model HM121) includes the following components:
- Tattoo Pen (1 unit)
- Foot Pedals (1 unit)
- Wireless Power Source (1 unit)
- Havers (1 unit)
- RCA Connector (1 unit)
- Poseidon Tattoo Cartridge Needles (20 units: 1205RL/5PCS, 1207RL/5PCS, 1209RS/5PCS, 1007CM/5PCS)
- 5cm Black Bandage (1 unit)
- Brushes (1 unit)
- Tattoo Clean Pad (4 units)
- Gloves (1 Pair)
- Tattoo Transfer Paper (2 units)
- Tattoo Practice Leather (2 units)
- Tattoo Ink Cups (20 medium size, 20 small-sized)
Орнотуу нускамалары
- Компоненттерди таңгактан чыгаруу: Carefully remove all items from the packaging and verify against the kit contents list.
- Кубат булагына туташтыруу: Attach the RCA connector to the RCA Jack on the tattoo pen. If using the wireless power source, ensure it is charged and securely connected to the RCA Jack.
- Install Needle Cartridge: Insert the desired tattoo cartridge needle into the needle insertion port of the tattoo pen. Twist gently to secure it.
- Ийненин тереңдигин тууралоо: Rotate the non-slip grip of the tattoo pen to adjust the needle depth according to your tattooing requirements.
- Prepare Workstation: Set up your workstation with the tattoo practice leather, ink cups, and other accessories. Ensure a clean and sterile environment.
Иштөө нускамалары
Күйгүзүү жана Орнотууларды тууралоо
- Күйгүзүү: Connect the foot pedal or activate the wireless power source. The tattoo pen requires a starting voltage of 8V.
- Тtage Тууралоо: жумушчу томtage range is 5-12V. Adjust the voltage on your power supply to achieve the desired speed and needle force.
- Ылдамдыгы: The motor operates at approximately 1000RPM, with a speed of 8V10000RPM.
- Инсульттун узундугу: The pen has a fixed stroke length of 3.5MM.
Wireless Power Supply Usage
The wireless power supply features a 1500mAh battery capacity, providing approximately 6 hours of working time. A full charge takes about 2 hours.
Needle Cartridge Information
The kit includes premium cartridge needles made from strictly selected 316 stainless steel material. Each needle is sterilized by ethylene oxide to ensure safety. The optimized needle design facilitates easier ink loading, improves efficiency, reduces the number of stitches, and minimizes skin lesions.
Техникалык тейлөө
- Тазалоо: After each use, disassemble the tattoo pen and clean all reusable components thoroughly with appropriate sterilization solutions. Use the provided brushes and clean pads.
- Ийне алмаштыруу: Always use new, sterile needle cartridges for each client and dispose of used needles safely in a sharps container.
- Майлоо: Periodically apply a small amount of machine lubricant to moving parts as recommended by professional tattoo equipment guidelines to ensure smooth operation and longevity of the motor.
- Сактагыч: Store the tattoo machine and accessories in a clean, dry place away from direct sunlight and extreme temperatures.
- Коргоо катмары: The aluminum alloy protective layer at the interface of the needle cylinder and the tattoo pen is designed for wear resistance. Inspect it regularly for any signs of damage.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Tattoo pen not turning on | Power supply not connected/charged, faulty RCA cable, foot pedal issue | Check power supply connection and charge level. Ensure RCA cable is secure. Test foot pedal functionality. |
| Pen vibrates excessively or is noisy | Loose needle cartridge, motor issue, incorrect voltage | Ensure needle cartridge is securely installed. Verify voltage setting. If problem persists, contact support. The pen is designed for quiet stability. |
| Needle not extending/retracting properly | Incorrect needle depth adjustment, faulty cartridge, debris in mechanism | Re-adjust needle depth. Replace needle cartridge. Clean the pen mechanism. |
| Pen feels uncomfortable or slips | Grip not clean, hand fatigue | Ensure the non-slip grip is clean and dry. Take breaks during long sessions. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | HM121 |
| Материал | Алюминий эритмеси |
| Working Voltage | 5-12V |
| Баштtage | 8V |
| Working Frequency / Speed | 1000RPM / 8V10000RPM |
| Stroke Length | 3.5MM |
| Түс | Кара |
| Колдонмо | Embroidery tattoo |
| Кит Салмагы | Болжол менен 950г-1100г |
| Wireless Power Supply Battery Capacity | 1500mAh |
| Wireless Power Supply Working Time | Болжол менен 6 саат |
| Wireless Power Supply Charging Time | Болжол менен 2 саат |
| Needle Material | 316 Stainless Steel (Ethylene Oxide Sterilized) |
Колдонуучу сунуштар
- For optimal performance and to minimize skin trauma, ensure your needle depth is correctly set for the specific area and technique you are working on.
- While the kit is suitable for 'Embroidery tattoo', which includes cosmetic tattooing, always consult with a qualified professional or undergo proper training before attempting procedures like micropigmentation on eyebrows, lips, or eyelids.
- Regularly check the wireless power supply's charge level to avoid interruptions during a session.
Көп берилүүчү суроолор (FAQ)
- Q: Can this tattoo machine be used for micropigmentation of eyebrows, lips, and eyelids?
- A: The product is specified for 'Embroidery tattoo', which is a broad term that can include cosmetic tattooing procedures like micropigmentation. However, for sensitive areas such as eyebrows, lips, and eyelids, it is crucial to have specialized training and understand the specific requirements and techniques for these procedures. Always prioritize safety and professional standards.
Кепилдик жана колдоо
For any product inquiries, technical support, or warranty claims, please contact the seller directly. Information regarding return and refund policies can be found on the purchase platform.
