1. Киришүү
The EARU EAPDX-63AVE-RGB is a compact, multi-function protective device designed to safeguard electrical circuits and appliances from various power anomalies. It integrates over-voltage, томдун астындаtage, and over-current protection, along with real-time voltage, current, and energy metering. This device features an adjustable self-resetting mechanism and a high-definition digital display for easy monitoring and configuration.
Сүрөт 1: Алдыңкы view of the EARU Multi-Function Protector.
2. Коопсуздук маалыматы
- Орнотуу жана тейлөө квалификациялуу электриктер тарабынан гана аткарылышы керек.
- Ensure the power supply is disconnected before any installation or wiring work.
- Verify correct wiring connections according to the provided diagram to prevent damage to the device or connected equipment.
- Do not operate the device in environments exceeding its specified operating temperature or humidity ranges.
- The device is designed for single-phase AC 230V systems. Using it with incompatible voltage systems may cause malfunction or damage.
3. Негизги өзгөчөлүктөрү
- Ашык-томtage Коргоо: Adjustable from 230V to 300V (Default: 280V).
- Томдун астындаtage Коргоо: Adjustable from 80V to 210V (Default: 160V).
- Ашыкча ток коргоо: Adjustable from 1A to 63A (Default: 50A).
- Adjustable Reconnect Time: Delay on time from 1s to 600s (Default: 5s).
- реалдуу убакыт мониторинг: Көрсөтөт томtage (V), current (A), and energy consumption (kWh).
- Автоматтык калыбына келтирүү: Automatically restores power after fault conditions clear.
- High-Definition Digital Display: Clear and precise readings.
- PC Flame-Retardant Material: Ensures safe and reliable operation.
- 35MM DIN Rail Mounting: Easy installation in standard electrical panels.
Figure 2: Adjustable self-resetting protection features.
4. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| поляктар | 1P+N |
| Номиналдуу ток | 1-63A (Жөнгө салынуучу) |
| Rated Voltage | AC 230V |
| Номиналдуу жыштык | 50/60 Гц |
| Operating Voltage Диапазон | AC 80V-400V (Single Phase) |
| Ашык-томtage Коргоо | 230V-300V (Жөнгө салынуучу) |
| Томдун астындаtage Коргоо | 80V-210V (Жөнгө салынуучу) |
| Ашыкча ток коргоо | 1A-63A (Adjustable) |
| Убакытты кайра туташтыруу | 1s-600s (Adjustable) |
| Өлчөө тактыгы | ±1% |
| Орнотуу | 35 мм динамометрдик рельс |
| Иштөө температурасы | -50-55° |
| Нымдуулук | <50% at 40℃ (Without Condensation) |
| Коргоо классы | IP20 |
| Сертификация | CE |
3-сүрөт: Продукциянын өлчөмдөрү жана параметрлери.
5. Орнотуу
5.1 Монтаждоо
The EARU Multi-Function Protector is designed for 35MM DIN rail mounting. Secure the device onto the DIN rail using its integrated clips. Ensure it is firmly attached to prevent movement.
Figure 4: Protector mounted on a DIN rail.
5.2 Электр өткөргүч схемасы
Connect the device according to the wiring diagram below. Ensure that the input (IN) and output (OUT) terminals are correctly identified and connected to the Neutral (N) and Live (L) lines of your AC power supply. The device uses single-channel wiring with tunnel-type wiring ports for secure connections.
Figure 5: Front panel and connection points.
Figure 6: Wiring Installation Diagram (refer to the diagram for detailed connections).
Зымдарды орнотуу кадамдары:
- Turn off the main power supply before starting any wiring.
- Connect the incoming Neutral (N) and Live (L) wires to the 'IN' terminals at the top of the protector.
- Connect the outgoing Neutral (N) and Live (L) wires to the 'OUT' terminals at the bottom of the protector, leading to your load.
- Бардык байланыштар бекем жана коопсуз экендигин текшериңиз.
6. Иштөө жана Орнотуулар
The device features a digital display and three buttons for operation: an 'Up' arrow, a 'Down' arrow, and a 'SET' button. The display shows real-time voltage (V), current (A), and energy consumption (kWh).
Figure 7: High-definition digital display and responsive buttons.
6.1 Navigating the Settings Menu
To enter the setting state, press and hold the 'SET' button for more than 3 seconds. Use the 'Up' and 'Down' arrow buttons to navigate through the menu options and adjust values. Press 'SET' again to confirm a selection or move to the next parameter.
Орнотуулар менюсу төмөнкүлөрдү камтыйт:
- Pt (Power-on delay time): 1s-600s
- rE (Protection recovery delay): 1s-600s
- OU (Over-voltage protection setting): 230V-300V
- OUr (Over-voltage recovery setting): 225V-295V
- UU (Under-voltage protection setting): 80V-210V
- UUr (Under-voltage recovery setting): 85V-215V
- UtE (Over-under-voltage protection action delay time): 0.1s-10s
- URd (Calibration Voltage Value): -9.9V ~ 9.9V
- oC (Over current protection value): 1-63A
- CtE (Overcurrent protection action time): 0.1s-60s
- Ctt (Overcurrent protection continuous times): 0-20
- CrAd (Current Calibration): -9.9A ~ 9.9A
- PC (Power range setting): 1-999
- CLP (Reset mode): CLP 003 Reset setting, CLP 008 Reset power level, CLP 009 Restore Factory Settings
For a visual guide on adjusting settings, please refer to the demonstration video:
Video 1: Demonstration of setting adjustments on the EARU Multi-Function Protector.
7. Техникалык тейлөө
- Regularly inspect the device for any signs of physical damage or loose connections.
- Keep the device clean and free from dust and moisture. Use a dry, soft cloth for cleaning.
- Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында туура желдетүүнү камсыз кылыңыз.
8. Кыйынчылыктарды
8.1 Жалпы маселелер
- Дисплей жок/кубат жок: Check the input power supply and ensure all wiring connections are secure.
- Түзмөктүн көп сапарлары: Review your over-voltage, томдун астындаtage, and over-current settings. They might be set too sensitively for your load or power conditions. Adjust the protection values and recovery delays as needed.
- Туура эмес окуулар: Эгерде томtage or current readings appear inaccurate, consider performing a calibration using the URd (Voltage Calibration) or CrAd (Current Calibration) settings in the menu.
- Device Not Resetting: Check the 'rE' (Protection recovery delay) setting. The device will wait for this duration before attempting to reconnect after a fault.
8.2-томtage Compatibility (120V AC)
While the device has an operating voltage range of AC 80V-400V, its rated voltage is AC 230V, and default protection settings are optimized for 230V systems. If you intend to use this product in a 120V AC system, you would need to manually adjust the under-voltagд жана ашык-томtage protection settings to appropriate values for 120V. However, the device's primary design and default configuration are for 230V applications.
9. Колдонуучунун кеңештери
- Resetting kWh to 0: To reset the accumulated energy (kWh) reading, navigate to the settings menu (press and hold 'SET' for 3 seconds), find the 'CLP' option, and select 'CLP 008 Reset power level'. Confirm your selection.
- Заводдун баштапкы абалга келтирүү: If you encounter persistent issues or wish to revert all settings to their original defaults, use the 'CLP 009 Restore Factory Settings' option in the menu.
- Оптималдуу жөндөөлөр: For best protection, set your over-voltagе жана ылдый-томtage thresholds slightly above and below your nominal line voltage, respectively, allowing for minor fluctuations without unnecessary tripping.
10. Кепилдик жана колдоо
For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase. Ensure all installation and operation guidelines are followed to maintain warranty validity.
