EJEAS мотоцикл туулгасы, Bluetooth домофон гарнитурасы үчүн колдонмо

1. Продукт бүтүп калдыview

This manual provides instructions for the EJEAS headset accessory designed for various EJEAS motorcycle helmet Bluetooth intercom systems. Please note that this product is an accessory and the intercom unit itself is not included.

The headset is available in different configurations:

• Soft 1PC: One soft earphone and microphone unit.
• Hard 1PC: One hard earphone and microphone unit.
• Soft 2 PCS: Two soft earphone and microphone units.
• Hard 2 PCS: Two hard earphone and microphone units.

Ensure you have selected the correct type for your intercom unit and helmet.

2. Орнотуу жана орнотуу

Proper installation of the headset is crucial for optimal audio quality and comfort. The installation process will vary slightly depending on your helmet type and the specific intercom unit you are using.

2.1 Шайкештикти текшерүү

This headset is compatible with the following EJEAS Bluetooth intercom models:

• Y10 / Y10-2x
• Y20 / Y20-2x / Y20max
• Y60
• Y70
• Y80 / Y80-2x
• Y06
• Q08 / Q08-2x
• Q58max

2.2 Headset Type Selection

Choose between 'Soft' or 'Hard' earphones based on your preference and helmet design. '1PC' refers to a single headset unit, while '2 PCS' refers to a pair of headset units, typically for two riders or a rider and passenger setup.

2.3 General Installation Steps (Refer to your intercom manual for specifics)

1. Prepare your helmet: Ensure the helmet interior is clean and free of obstructions where the earphones and microphone will be placed.
2. Mount the intercom unit: Attach your EJEAS Bluetooth intercom unit to the side of your helmet according to its specific instructions.
3. Position earphones: Place the earphones inside the helmet, aligning them with your ears. Most helmets have designated pockets for intercom speakers. Secure them using the adhesive backing or Velcro provided with your intercom unit.
4. Position microphone: Route the microphone boom (for hard type) or the soft microphone (for soft type) towards your mouth. Ensure it is positioned to pick up your voice clearly without obstructing your vision or helmet closure.
5. Connect to intercom: Plug the headset's connector into the appropriate port on your EJEAS Bluetooth intercom unit. Ensure a secure connection.
6. Кабелдик башкаруу: Tuck away any excess cables neatly within the helmet padding to prevent discomfort or entanglement.

3. Иштөө нускамалары

This headset functions as an audio input/output accessory for your EJEAS Bluetooth intercom unit. All operational controls, such as power on/off, volume adjustment, pairing, and intercom functions, are managed directly through your specific EJEAS intercom unit.

Please refer to the instruction manual provided with your EJEAS Bluetooth intercom unit for detailed operating procedures.

4. Техникалык тейлөө жана кам көрүү

To ensure the longevity and optimal performance of your EJEAS headset, follow these maintenance guidelines:

• Тазалоо: Gently wipe the earphones and microphone with a soft, damp кездеме. Катуу химиялык заттарды же абразивдүү материалдарды колдонуудан алыс болуңуз.
• Сактагыч: When not in use, store the headset in a dry, cool place, away from direct sunlight and extreme temperatures.
• Кабельге кам көрүү: Avoid sharply bending or pulling the cables, as this can damage the internal wiring.
• Нымдуулук: While designed for outdoor use, avoid prolonged exposure to heavy rain or submerging the headset in water. Ensure the connector is dry before plugging it into the intercom unit.

5. Кыйынчылыктарды

If you experience issues with your headset, consider the following general troubleshooting steps:

• No audio/microphone not working:
  1. Ensure the headset connector is fully and securely plugged into the intercom unit.
  2. Check the volume settings on your intercom unit.
  3. Verify that the intercom unit itself is powered on and functioning correctly.
  4. Test the headset with another compatible intercom unit if available, or test another headset with your intercom unit to isolate the problem.
• Аудио сапаты начар/статикалык:
  1. Ensure the earphones are positioned correctly over your ears.
  2. Check for any damage to the cables or connectors.
  3. Ensure the microphone is not obstructed and is positioned correctly.
  4. Interference from other electronic devices might be a factor; try moving away from potential sources of interference.
• Физикалык зыян: If the headset has visible damage, it may require replacement.

For more specific troubleshooting, consult the manual for your EJEAS Bluetooth intercom unit or contact EJEAS customer support.

6. Техникалык шарттар

7. Кепилдик жана колдоо

EJEAS Global Store is committed to providing quality products and customer satisfaction.

• Акысыз алмаштыруу: This product comes with a 365-day free replacement policy.
• Акысыз кайтаруу: Сатып алгандан кийин 90 күндүн ичинде акысыз кайтарымдан ырахат алыңыз.
• Жеткирүү Кепилдиги: Fast delivery is ensured, with refunds available for delayed, lost, or damaged items.
• Коопсуздук жана Купуялык: Жеке маалыматтарыңыз коопсуз жана ишенимдүү сакталат жана макулдугусуз үчүнчү жактар ​​менен бөлүшүлбөйт.

For any support inquiries, please contact EJEAS Global Store directly through your purchase platform.

8. Колдонуучунун кеңештери

• Verify Intercom Model: Always double-check the compatibility of the headset with your specific EJEAS intercom model before purchase and installation.
• Коопсуз туташуу: Ensure the headset's connector is firmly seated in the intercom unit to prevent intermittent audio or microphone issues.
• Кабель багыттоо: Take time to route the cables neatly within your helmet. This not only improves comfort but also prevents damage to the wires from pinching or snagging.
• Микрофондун жайгашуусу: Experiment with microphone placement to find the optimal position for clear voice transmission, minimizing wind noise and breathing sounds.