Vortex планшетинин сенсордук экранынын санариптештиргичин алмаштыруу боюнча колдонмо

Introduction

This manual provides essential information for the replacement of the touch screen digitizer for various Vortex tablet models. This product is a capacitive touch panel designed to restore touch functionality to your tablet when the original screen is cracked, broken, or unresponsive, while the underlying LCD display remains functional.

The digitizer is a crucial component for touch input on your tablet. It is important to correctly identify the part needed for your specific tablet model to ensure compatibility and proper function.

Орнотуу жана орнотуу

Replacing a tablet touch screen digitizer requires careful handling and technical knowledge. It is recommended that installation be performed by a qualified technician. If you choose to perform the installation yourself, proceed with caution.

Орнотуудан мурун:

1. Verify Part Compatibility: Before attempting any repair, it is crucial to verify that the replacement digitizer is compatible with your specific tablet model. Open your tablet and carefully check the touch screen connector cable and its code number. Some tablets of the same model may have different connector cables. The digitizer you receive must have the same connector cable as your original part.
2. Identify the Correct Part:
   • Touch Panel Digitizer Only: If the top touch panel (glass) is cracked or broken, but the image displayed on the screen underneath is perfectly fine, you only need to replace the touch panel digitizer.
   • LCD Display Only: If the image under the glass is broken (e.g., black liquid, lines, no display) and the touch panel is intact, you only need an LCD display.
   • Complete Screen Assembly: If both the top touch panel is broken and the LCD image is damaged, you will need a complete screen assembly (digitizer + LCD). This product is for the touch panel digitizer only.
3. Жумуш мейкиндигиңизди даярдаңыз: Ensure a clean, well-lit, and static-free environment. Gather all necessary tools (e.g., small screwdrivers, prying tools, heat gun/hair dryer, adhesive).
4. Түзмөктү өчүрүү: Completely power off your tablet and disconnect any power sources before beginning the repair.

Орнотуу кадамдары (Жалпы көрсөтмө):

Note: Specific steps may vary by tablet model. Refer to a detailed repair guide or video for your exact model.

1. Арткы капкакты алып салуу: Carefully open the tablet's back cover using appropriate prying tools.
2. Батареяны ажыратыңыз: Disconnect the battery connector to prevent accidental short circuits during the repair.
3. Heat the Edges: Apply gentle heat to the edges of the screen to soften the adhesive holding the digitizer in place.
4. Carefully Pry Off Old Digitizer: Use thin prying tools to slowly separate the old digitizer from the tablet frame. Be extremely careful not to damage the LCD underneath or any other internal components.
5. Disconnect Flex Cable: Locate and carefully disconnect the flex cable of the old digitizer from the motherboard.
6. Таза кадр: Thoroughly clean any remaining adhesive residue from the tablet frame.
7. Жаңы санариптештиргичти сынап көрүңүз (акыркы орнотуудан мурун): Connect the new digitizer's flex cable to the motherboard. Reconnect the battery and power on the tablet to test touch functionality across the entire screen. Do not remove protective films or apply adhesive until testing is complete and successful.
8. Желимди колдонуу: If the test is successful, power off the tablet, disconnect the battery, and apply new adhesive to the tablet frame.
9. Жаңы санариптештиргичти орнотуу: Carefully align and place the new digitizer onto the tablet frame, pressing gently to secure it with the adhesive.
10. Компоненттерди кайра туташтыруу: Reconnect the battery and reassemble the tablet.

Visual References for Flex Cable Numbers:

Сенсордук экранды иштетүү

Once successfully installed, the new touch screen digitizer will function identically to the original. It provides capacitive touch input, allowing you to interact with your tablet's operating system and applications through gestures such as tapping, swiping, pinching, and zooming.

No special operation is required beyond the standard use of your tablet.

Техникалык тейлөө

To ensure the longevity and optimal performance of your new touch screen digitizer, follow these maintenance guidelines:

• Тазалоо: Жумшак, түксүз кездемени колдонуңуз, бир аз dampened with water or a screen-specific cleaning solution, to gently wipe the screen. Avoid harsh chemicals, abrasive materials, or excessive moisture.
• Коргоо: Чийиктерден жана майда соккулардан коргоо үчүн экран коргоочусун колдонууну карап көрүңүз.
• Кысымдан качуу: Do not apply excessive pressure to the screen, as this can damage the digitizer or the LCD underneath. Avoid placing heavy objects on the tablet.
• Температура: Avoid exposing the tablet to extreme temperatures, which can affect screen performance and adhesive integrity.

Проблемаларды чечүү

If you encounter issues after installing the new touch screen digitizer, consider the following troubleshooting steps:

• No Touch Response / Partial Response:
  • Ensure the flex cable is securely and correctly connected to the motherboard. A loose connection is a common cause.
  • Verify that the digitizer is fully compatible with your tablet model, especially checking the flex cable number.
  • Try performing a soft reset or a factory reset of your tablet (back up data first).
  • If the issue persists, the digitizer itself might be faulty, or there could be an issue with the tablet's motherboard.
• Арбак тийүүлөрү / Туура эмес жүрүм-турум:
  • This can sometimes be caused by static electricity or improper grounding during installation.
  • Ensure the digitizer is seated correctly and there's no pressure on the screen from the frame or other components.
  • A software update or reset might resolve minor software-related touch issues.
• Көйгөйлөрдү көрсөтүү (эгер бар болсо): If you observe issues with the visual display (e.g., lines, discoloration, no image), this indicates a problem with the LCD, not the digitizer. This replacement part is for touch functionality only.

Маанилүү: If you receive an unworking item, please try resetting or updating your device after installation. If the issue persists, create a testing video demonstrating the problem and contact customer support.

Техникалык шарттар

Колдонуучу сунуштар

• Unpacking Video: Upon receiving your package, it is highly recommended to record an unpacking video or take clear photos of the items. This serves as crucial evidence if you find the box or items broken upon arrival, assisting in any potential claims or support requests.
• Орнотуу алдындагы тест: Always test the new digitizer by connecting its flex cable to the tablet's motherboard before fully adhering it. This allows you to verify touch functionality without the risk of damaging the part during removal if it's faulty.
• Flex Cable Matching: Double-check the flex cable number on your original digitizer against the replacement part. Even for the same tablet model, different production batches might use different flex cables, leading to incompatibility.

Кепилдик жана колдоо

Кепилдик:

This product comes with a 30-day money-back guarantee. To be eligible for a return or exchange, items must be in their original packaging and in good, unused condition. Damaged products or products that have been installed are not covered under warranty and cannot be returned for a refund or exchange.

Refunds will typically be issued within 1-2 business days upon the receipt of the returned item.

Кардарларды колдоо:

For any inquiries or support, please contact customer service via the messaging system. Our representatives are available during the following business hours (Monday - Friday):

• CN: 9 AM - 6 PM
• RU: 4 AM - 1 PM
• AU: 11 AM - 8 PM
• UK: 1 AM - 10 AM
• DE: 2 AM - 11 AM
• US: 8 PM - 5 AM ET

For bulk orders, special pricing may be available. Please contact us for more details.