Introduction
The Aigo APC1 is a versatile fan hub and ARGB controller designed to manage the speed and lighting effects of your PC case cooling fans. It supports both 4-pin PWM (Pulse Width Modulation) for fan speed control and 3-pin 5V Addressable RGB (ARGB) for customizable lighting. With its included remote control and motherboard synchronization capabilities, the APC1 offers comprehensive control over your cooling and aesthetics.
Figure 1: Aigo APC1 Fan Hub and ARGB Controller with included accessories.
Продукт өзгөчөлүктөрү
- Кеңири байланыш: Features 6 ARGB (3-pin 5V) and 6 PWM (4-pin) signal output ports for multiple fans.
- Энелик платаны синхрондоштуруу: Supports synchronization with major motherboard RGB software, including ASUS AURA Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, and ASRock Polychrome Sync.
- Алыстан башкаруу: Provides convenient wireless control over fan speed and lighting effects.
- Динамикалык жарык эффекттери: Offers 62 built-in light effects for diverse aesthetic customization.
- PWM температурасын көзөмөлдөө: Allows for intelligent fan speed adjustment based on system temperature.
- Chassis Reset Button Linkage: Optional connection to the PC chassis reset button for alternative light effect control.
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- Aigo APC1 Controller (x1)
- PWM Signal Cable (500±10mm) (x1)
- 5V RGB Signal Cable (500±10mm) (x1)
- Double-Sided Velcro Adhesive Gum (x1)
- Алыстан башкаруу пульту (x1) - Note: CR2025 button battery is NOT included due to customs regulations. Please purchase separately.
Figure 2: Contents of the Aigo APC1 package.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | APC1 |
| Бренд аты | Айго |
| Type | Желдетүүчү ылдамдык контроллери |
| Материал | Пластик |
| Өлчөмдөрү (L*W*H) | 100 мм * 46 мм * 14 мм |
| Салмагы | 0.11 кг |
| Power Interface | SATA, 5V-3pin ARGB, 4PIN PWM |
| RGB колдоо | A-RGB |
| Origin | Материк Кытай |
Figure 3: Aigo APC1 Product Dimensions.
Орнотуу нускамалары (Орнотуу)
Follow these steps to properly install your Aigo APC1 controller:
- Контроллерди орнотуу: Use the provided double-sided Velcro adhesive gum to securely mount the APC1 controller inside your PC case in a suitable location.
- Туташуу кубаты: Connect the SATA power cable from your power supply unit (PSU) to the SATA input port on the controller. This provides power to the controller and connected fans/LEDs.
- Желдеткичтерди туташтырыңыз:
- Connect your 4-pin PWM fans to the PWM ports on the controller.
- Connect your 3-pin 5V ARGB fans/LED strips to the ARGB ports on the controller.
- Маанилүү: When connecting multiple fans, ensure the first fan is connected to the white port on the controller for proper signal distribution.
- Motherboard Synchronization (Optional):
- To synchronize ARGB lighting with your motherboard's software (e.g., ASUS AURA Sync), connect the included 5V RGB Signal Cable from the controller's "MB ARGB SYNC" port to your motherboard's 5V/3-pin ARGB header.
Caution: This controller is incompatible with 12V/4-pin RGB headers. Connecting to a 12V header may damage the LEDs.
- To synchronize PWM fan speed control with your motherboard, connect the included PWM Signal Cable from the controller's "MB PWM SYNC" port to a 4-pin PWM fan header энелик платаңызда.
- To synchronize ARGB lighting with your motherboard's software (e.g., ASUS AURA Sync), connect the included 5V RGB Signal Cable from the controller's "MB ARGB SYNC" port to your motherboard's 5V/3-pin ARGB header.
- Chassis Reset Button Linkage (Optional): If you wish to control lighting effects using your PC case's reset button, connect the "RESET SW" jumper cable from your chassis to the "RESET" port on the controller.
Figure 4: Controller Installation Diagram.
Figure 5: Motherboard Synchronization: 5V/3Pin A-RGB vs. 12V/4Pin RGB.
Figure 6: Close-up of the PWM/FG Signal Input Port.
Иштөө нускамалары
The Aigo APC1 controller can be operated via the included remote control or through motherboard synchronization.
Алыстан башкаруу функциялары
Ensure a CR2025 button battery is installed in the remote control before use.
Figure 7: Remote Control Button Functions.
- Start Button (Power Icon): Turns the controller and connected LEDs On/Off.
- Mode Control (+/-): Cycles through the 62 built-in lighting effects.
- LED Speed (+/-): Динамикалык жарыктандыруу эффекттеринин ылдамдыгын тууралайт.
- Star Night Mode: Activates a star-like lighting effect.
- Rainbow Mode: Activates a rainbow color cycle effect.
- Чагылган режими: Activates a lightning flash effect.
- Дем алуу режими: Activates a pulsating light effect.
- Red (R), Green (G), Blue (B) Buttons: Selects static red, green, or blue colors.
- Motherboard SYNC (M/B SYNC): Switches between remote control mode and motherboard synchronization mode.
Controller Button / Chassis Reset Button Control
If the chassis reset button is linked to the controller's RESET port:
- Short Press (RESET button on controller or chassis): Cycles through the 62 default lighting effects.
- 3 секунд басып, кармап туруңуз: Switches to motherboard synchronization mode.
- 6 секунд басып, кармап туруңуз: Turns off the lighting effects.
- Short Press (after 6-second hold): Exits automatic control mode and returns to the previous state.
Figure 8: Optional connection of the chassis reset button for light control.
Проблемаларды чечүү
- Fans/LEDs not powering on:
- Ensure the SATA power cable is securely connected from your PSU to the controller.
- Verify that your PSU is providing power.
- ARGB lighting not working or incorrect colors:
- Check that the 5V RGB Signal Cable is correctly connected to a 5V/3-pin ARGB header on your motherboard, not a 12V/4-pin RGB header.
- Ensure the ARGB fans/strips are properly connected to the controller's ARGB ports.
- If using motherboard sync, ensure the "M/B SYNC" button on the remote (or the controller button sequence) has been activated to switch to motherboard control.
- Confirm that your motherboard's RGB software is installed and configured correctly.
- Fan speed not controllable or incorrect readings:
- Ensure 4-pin PWM fans are connected to the PWM ports.
- If using motherboard sync, ensure the PWM Signal Cable is connected to a 4-pin PWM header on your motherboard.
- The PWM signal input port (PWM/FG) only carries the PWM signal. If you are measuring fan speed, ensure it is plugged into the correct PWM/FG signal input port.
- Алыстан башкаруу жооп бербей жатат:
- Check if the CR2025 button battery is installed and has sufficient charge. Replace if necessary.
- Пульт менен башкаруу пультун ортосунда эч кандай тоскоолдуктар жок экенин текшериңиз.
- Lost remote control:
- The controller can still be operated using the chassis reset button (if linked) or by switching to motherboard synchronization mode. There is no mention of app control.
Колдонуучу сунуштар
- For optimal ARGB synchronization, always double-check that your motherboard has a 5V/3-pin ARGB header. Connecting to a 12V/4-pin header can cause damage.
- When installing multiple fans, connect the first fan to the designated white port on the controller to ensure proper signal flow.
- If you prefer not to use the remote, linking the chassis reset button provides a convenient alternative for cycling through lighting effects and switching modes.
- Keep a spare CR2025 battery on hand for the remote control to avoid interruptions in wireless operation.
Техникалык тейлөө
To ensure the longevity and optimal performance of your Aigo APC1 controller:
- Чаңды тазалоо: Periodically clean the controller and its ports with compressed air or a soft, dry cloth to prevent dust buildup, which can affect performance and lead to overheating.
- Кабелдик башкаруу: Ensure all cables are neatly routed and not under excessive tension, which could lead to damage over time.
- Экологиялык шарттар: Operate the controller within standard PC operating temperatures and humidity levels. Avoid extreme conditions.
Кепилдик жана колдоо
The Aigo APC1 controller is designed for reliability and performance. For any issues or support inquiries, please contact the Aigo Official Store service where you purchased the product.
While specific warranty details for the controller are not provided, Aigo typically offers a 1-year warranty for fans and CPU radiators. Please retain your proof of purchase for warranty claims.
