Geevon Indoor Outdoor Thermometer Wireless with 3 Remote Sensors

Introduction

The Geevon Wireless Indoor Outdoor Thermometer provides accurate temperature and humidity readings for up to four locations simultaneously: one indoor unit and three remote outdoor sensors. Featuring a large LCD display with backlight, comfort indicators, and customizable alerts, this device helps you monitor environmental conditions in your home, garden, or other spaces to promote a healthier living environment.

Пакеттин мазмуну

• 1 x Main Display Unit
• 3 x Wireless Remote Sensors
• 1 x USB кубат кабели (негизги блок үчүн)
• 1 х Колдонуучунун колдонмосу (бул документ)

Жайгашуу

1. Негизги блокту кубаттоо: The main display unit can be powered by the included USB cable (for continuous backlight) or by 3 AAA batteries (not included). Insert batteries into the compartment on the back, observing polarity.
2. Powering the Remote Sensors: Each remote sensor requires 2 AAA batteries (not included). Open the battery compartment on each sensor and insert the batteries, ensuring correct polarity.
3. Sensor Channel Selection: Each remote sensor has a channel switch (1, 2, or 3). Set each sensor to a different channel to avoid interference.
4. Синхрондоштуруу: Once batteries are inserted into both the main unit and sensors, the main unit will automatically search for and connect to the remote sensors. This process may take a few minutes. Ensure sensors are within range during initial setup.
5. Жайгаштыруу параметрлери:

   

   • Негизги блок: Features a tabletop stand and can also be wall-mounted. Place it in a central location indoors for optimal signal reception.
   • Алыстан сенсорлор: Designed for wall mounting, tabletop placement, or hanging. For outdoor use, place sensors in a sheltered area to protect them from direct rain and sunlight, ensuring accurate readings and longevity. The wireless transmission range is up to 200 feet (60 meters) in open air.

Иштөө нускамалары

1. LCD дисплей: The 5-inch large LCD display shows indoor temperature and humidity, along with readings from the three remote sensors (Channel 1, 2, 3).
2. Арткы жарык: When powered by USB, the backlight remains on. If using batteries, press the 'LIGHT' button to activate the backlight for a few seconds.
3. Температура бирдигин тандоо: Press the 'MEM' button to switch between Celsius (°C) and Fahrenheit (°F) display for all temperature readings.
4. Max/Min Records: The display shows the past 24 hours' maximum and minimum temperature and humidity records. These records update every 24 hours.
5. Trend Arrows: Arrows next to the temperature and humidity readings indicate whether the values are rising, falling, or remaining stable.
6. Комфорт индикатору: The main unit features a face icon comfort indicator to quickly assess indoor conditions:

   

   • КУРГАК: Нымдуулук < 40%
   • КОМФОРТ: 40% ≤ Humidity ≤ 70% AND 68°F ≤ Temperature ≤ 82.4°F (20°C ≤ Temperature ≤ 28°C)
   • СУУ: Нымдуулук > 70%
7. Температура/Нымдуулук жөнүндө эскертүүлөр: You can manually set high and low temperature and humidity alert values. The device will emit an audible alarm when the measured value reaches these pre-set maximum or minimum thresholds. Refer to the detailed instructions in the full manual for setting specific alert values.

Техникалык тейлөө

• Тазалоо: Wipe the display unit and sensors with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Батареяны алмаштыруу: Replace batteries in both the main unit and remote sensors when the low battery indicator appears on the display. Ensure to use fresh AAA batteries and dispose of old batteries responsibly.
• Курчап турган чөйрөнү коргоо: While remote sensors are designed for outdoor use, placing them in a sheltered location will extend their lifespan and ensure more accurate readings by protecting them from extreme weather conditions.

Проблемаларды чечүү

• Дисплей жок/Алсыз дисплей:
  • Check battery installation and replace with fresh batteries if needed.
  • Ensure the USB power cable is securely connected if using USB power.
• Remote Sensor Not Connecting:
  • Ensure remote sensor batteries are fresh and correctly installed.
  • Verify that each remote sensor is set to a unique channel (1, 2, or 3).
  • Bring the remote sensor closer to the main unit to re-establish connection.
  • Press and hold the 'CHANNEL' button on the main unit to manually search for sensors.
  • Avoid placing sensors near large metal objects or strong electromagnetic interference.
• Туура эмес окуулар:
  • Ensure sensors are not in direct sunlight or exposed to direct moisture, which can affect readings.
  • Allow the units to stabilize for at least 30 minutes after initial setup or relocation.
  • Compare readings with another known accurate thermometer/hygrometer if available.
• Outdoor Sensors Show Fahrenheit by Default: The main unit's 'MEM' button controls the temperature unit for all displays (indoor and all remote channels). Press 'MEM' to toggle between °C and °F.

Техникалык шарттар

Колдонуучу сунуштар

• For continuous backlight and to avoid frequent battery changes, use the USB power supply for the main unit.
• When setting up, place the remote sensors and main unit close together initially to ensure they pair correctly, then move sensors to their desired locations.
• To maximize battery life in remote sensors, ensure they are placed in locations with stable temperatures and away from extreme fluctuations.
• Regularly check the comfort indicator to maintain optimal indoor conditions, which can help prevent health issues related to humidity levels.

Кепилдик жана колдоо

For any questions, technical support, or warranty inquiries, please contact Geevon customer service through your retailer or the official Geevon support channels. Please have your model number (86190) ready when contacting support.