1. Киришүү
Thank you for choosing the MAIMEIMI G13/Y03 GPS Head Up Display. This device is designed to enhance your driving safety and convenience by projecting essential vehicle information directly into your line of sight. Utilizing advanced GPS+Beidou dual-chip technology, it provides accurate speed, time, and directional data without delay. This manual will guide you through the setup, operation, and maintenance of your new HUD.
2. Коопсуздук маалыматы
- Аппараттын бекем орнотулганын жана сиздин ишиңизге тоскоол болбогонун текшериңиз view жолго же унаанын башкаруусуна тоскоол болот.
- Do not attempt to adjust the device settings while driving. Always pull over to a safe location before making any changes.
- Аппаратты суудан жана экстремалдык температурадан алыс кармаңыз.
- Use only the provided USB cable for power to prevent damage.
3. Пакеттин мазмуну
G13 Package:
- 1 x G13 HUD бирдиги
- 1 x USB кабели
- 1 x тайгаланбаган килемче
- 1 х кашаа
- 1 x User Manual
Y03 Package:
- 1 x Y03 HUD Unit
- 1 x USB кабели
- 1 x тайгаланбаган килемче
- 1 x User Manual
4. Орнотуу жана орнотуу
4.1 Орнотуу
The MAIMEIMI HUD is designed for non-destructive installation and can be placed on your dashboard or mounted on the A-pillar. Choose a location that does not block your line of sight and allows for clear visibility of the display.
- Куралдар тактасынын жайгашуусу: Use the provided non-slip mat to secure the HUD on your dashboard.
- A-pillar/Windshield Mounting (G13 only): Attach the suction cup bracket to the device and then to a clean, smooth surface on your A-pillar or windshield. The bracket offers 360-degree rotation for optimal viewбурчтар.
4.2 Кубат туташтыруу
The HUD is a plug-and-play device. Connect the provided USB cable to the Micro USB interface on the back of the HUD and then to a USB port in your car or a cigarette lighter car charger port.
The device will automatically turn on when your car starts and turn off when the car shuts down, ensuring zero power consumption when not in use.
5. Иштөө нускамалары
5.1 Дисплей режимдери жана функциялары
The HUD provides various display modes and features to keep you informed:
- Ылдамдык көрсөтүү: Shows current vehicle speed in KM/H (G13 also supports MPH).
- Убакытты көрсөтүү: Учурдагы убакытты көрсөтөт.
- Айдоо багыты: Displays compass directions (N, S, E, W).
- Спутниктердин саны: Indicates the strength of the GPS signal.
- Автоматтык которуу: When vehicle speed is 0, the time display is automatically switched. When speed is 1+, the speed display is automatically switched.
5.2 Unit Switching (G13)
The G13 model supports switching between MPH and KM/H. Refer to the physical manual for specific button operations to switch units.
5.3 Жарыктыкты автоматтык түрдө жөндөө
Both G13 and Y03 models feature a built-in light sensor that automatically adjusts the display brightness according to the external environment. This ensures clear visibility during both day and night driving conditions.
5.4 Коопсуздук сигнализациясы
The HUD includes two important safety alarms:
- Ашыкча ылдамдык сигналы: Can be set to alert you when your speed exceeds a predefined limit.
- Чарчаган айдоо эскертүүсү: Activates after 8 hours of continuous driving to remind you to take a break.
5.5 Color Switching
The display colors can be switched to various combinations including green, yellow-green, light blue, cyan, blue, red, and purple. Use the dial button (G13) or refer to the manual for Y03 to cycle through color options.
Video: Product demonstration showing various display modes, installation, and color switching.
6. Техникалык тейлөө
- Түзмөктү жумшак, кургак чүпүрөк менен сүртүп, таза кармаңыз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Ensure the light sensor is not obstructed for proper automatic brightness adjustment.
- Avoid exposing the device to direct sunlight for extended periods when not in use, especially in hot climates.
7. Кыйынчылыктарды
- Дисплей/кубат жок: Check if the USB cable is securely connected to both the HUD and the car's power source. Ensure the car's ignition is on.
- Туура эмес тез окуу: The device relies on GPS signals. Ensure it has a clear view of the sky. Test the device outdoors, not inside a garage or parking structure, for accurate readings.
- Дисплей өзгөрбөйт: For speed display, ensure your vehicle speed is above 1 KM/H. If stationary, it may switch to time display.
- Сигнализациялар иштебей жатат: Check the device settings to ensure overspeed and fatigue driving alarms are enabled and configured correctly.
8. Техникалык шарттар
| Өзгөчөлүк | G13 Model | Y03 Model |
|---|---|---|
| Чип | GPS+Beidou Dual Chip (10Hz refresh rate) | |
| Screen Size | Not specified (Large font) | 2.8 дюйм |
| Материал | Белгиленген эмес | ABS+PC |
| Экран түрү | HD LED | LED |
| Ылдамдык бирдиги | KM/H, MPH | KM/H (MPH not supported) |
| Колдонулуучу моделдер | Universal for all cars, trucks, buses, motorcycles, e-scooters, e-bikes | |
| Түс | Not specified (Black unit) | Кара жана жашыл |
| Өзгөчөлүктөр | Overspeed Alarm, Fatigue Driving Reminder, Auto Brightness, Multiple Colors, 360° Rotating Suction Cup Bracket | Overspeed Alarm, Fatigue Driving Reminder, Auto Brightness, Sunshine Hood |
9. Колдонуучунун кеңештери
- For optimal visibility, ensure the device is placed where it has a clear line of sight to the road ahead.
- Алдын алаtage of the automatic brightness feature; avoid manually adjusting brightness unless necessary.
- Always test the device in an open area with a good GPS signal to confirm accurate speed readings before relying on it for navigation.
10. Кепилдик жана колдоо
For warranty information and technical support, please refer to the seller's policies or contact the MAIMEIMI customer service directly. Keep your purchase receipt as proof of purchase.
