1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your ANERN AN-MSC-60A MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from solar panels to various battery types in 12V or 24V systems, ensuring optimal charging and battery longevity.
Figure 1: ANERN MPPT Solar Charge Controller AN-MSC-60A front view, highlighting Max Charging Current, Max PV Input, and Battery Voltage.
2. Негизги өзгөчөлүктөрү
- Advanced MPPT (Maximum Power Point Tracking) technology with tracking efficiency no less than 99.5%.
- High conversion efficiency, reaching up to 97%.
- Super-fast maximum power tracking speed.
- Accurate identification and tracking of multi-wave peak maximum power points.
- Reliable maximum input power for PV arrays, ensuring equipment safety.
- Wide PV массиви максималдуу кубаттуулук чекитинин иштөө көлөмүtage диапазону.
- Автоматтык 12V/24V система тtage идентификация.
- LCD display for dynamic operation data and working status.
- Multiple load control modes: Regular, Light Control, Light & Time, and Reverse Light Control.
- Supports various battery types: Sealed, GEL, Flooded, LiFePO4, and Li(NiCoMn)O2.
- Батареянын температурасын компенсациялоо функциясы.
- Күч статистикасын жазуу функциясы.
- External display unit and peripheral support for real-time data view and parameter setting.
- PWM function at High Voltage Disconnection (HVD) point to protect the battery.
Figure 2: High Efficiency MPPT Tracking
3. Орнотуу жана орнотуу
Follow these steps carefully to connect and install your solar charge controller. Ensure all connections are secure before powering on the system.
- Open the cover by gently pulling both hands down to reveal the screw terminals.
- Connect the battery cables first. Ensure correct polarity (positive to positive, negative to negative).
- Connect the photovoltaic (solar panel) cables. Ensure correct polarity.
- Connect the load cables. Ensure correct polarity.
Figure 3: Installation Steps and Terminal Access
3.1 Электр өткөргүч схемасы
The following diagram illustrates the typical wiring configuration for the MPPT solar charge controller in a solar power system. Always ensure proper fusing and breaking mechanisms are in place for safety.
4-сүрөт: Системанын зымдарынын схемасы
3.2 Жылуулук диссипациясы
The controller features a die-cast aluminum structure designed for efficient heat dissipation, ensuring continuous and stable charging performance.
5-сүрөт: Жылуулуктун бөлүнүп чыгуу механизми
4. Иштөө нускамалары
4.1 Жүктөө режимдери
The controller offers four distinct load operating modes. The default setting is 24-hour operation. You can select the desired mode based on your application needs.
Figure 6: Load Operating Modes
- LD1 (Кадимки режим): The load operates normally and can be turned on or off manually.
- LD2 (Жарыкты башкаруу режими): The load automatically turns on at dusk and off at dawn.
- LD3 (Light & Time Control Mode): The load operates for a set number of hours after dark and before dawn. The controller automatically identifies dark and light conditions based on the local environment.
- LD4 (Reverse Light Control Mode): The load automatically turns on at dawn and off at dark.
4.2 Interface Description (LCD and Buttons)
The LCD provides real-time status and data. The buttons allow for navigation and parameter adjustments.
Figure 7: LCD Interface and Button Functions
| пункт | Icon | Статус |
|---|---|---|
| PV массив | ☀️ / 🌙 | Күн түн |
| ➡️ | Заряддоо | |
| Батарея | 🔋 | Заряддалбаган / Батареянын сыйымдуулугу |
| LiPo / LiFe | Батарея түрү | |
| Жүктөө | 💡 | Жүктөө / Жүктөөдөн түшүрүү |
| Button meaning | Button pattern | Баскыч функциясы |
|---|---|---|
| МЕНЮ | 🔽 | Short press to switch down; press and hold for 3 seconds to enter the next interface |
| SET | 🔼 | Short press to switch up; press and hold for 3 seconds to exit without saving |
5. Техникалык тейлөө
To ensure optimal performance and longevity of your MPPT Solar Charge Controller, regular maintenance is recommended:
- Keep the controller clean and free from dust and debris.
- Ensure proper ventilation around the unit to facilitate heat dissipation.
- Мезгил-мезгили менен бардык зымдарды туташтыргычтын бекемдигин жана коррозиясын текшерип туруңуз.
- Inspect the solar panels and battery terminals for any signs of damage or wear.
- LCD дисплейди ката коддору же адаттан тыш көрсөткүчтөр үчүн көзөмөлдөңүз.
6. Troubleshooting and Protection Functions
The controller is equipped with several protection functions to safeguard your system. Understanding these can help in basic troubleshooting.
Figure 8: Controller Protection Functions
- Solar Panel Reversed: The controller is protected if the solar panel polarity is reversed, especially if the battery is not connected.
- Battery Reversed: The controller is protected if the battery polarity is reversed, particularly if the PV array is unconnected.
- Батарея ашыкча көлөмtage: Protection activates if the battery voltagе ашык томго жететtage point, preventing damage from overcharging.
- Battery Over-Discharge: Protection activates if the battery voltagе томдун астына төмөндөйтtage point, preventing deep discharge.
- Over-Load: Protection engages if the load current exceeds the rated current, preventing damage to the controller and connected devices.
If you encounter issues not covered here, please consult the full product documentation or contact customer support.
7. Техникалык шарттар
Below are the detailed technical specifications for the ANERN AN-MSC-60A MPPT Solar Charge Controller.
| Параметр | 20A | 30A | 40A | |
|---|---|---|---|---|
| Киргизүү | ||||
| Максималдуу киргизүү күчү | 12V | 260 Вт | 390 Вт | 520 Вт |
| 24V | 520 Вт | 780 Вт | 1040 Вт | |
| Макс. ачык томtagкүн панелинин д | 60V | 100V | ||
| Системанын рейтинги томtage | 12V/24V Автоматтык түрдө таанылат | |||
| Батарея көлөмүtage диапазону | 8V-32V | |||
| Чыгуу | ||||
| Номиналдуу разряддык ток | 20A | 30A | ||
| Батарея түрү | User default, Sealed, Flooded, GEL, LiFePO4, Li(NiCoMn)O2. | |||
| Теңдештирилген заряддоо томtage | Maintenance-free lead acid battery 14.6V, GEL: No: Lead acid flooded battery: 14.8V | |||
| Абсорбциялык заряддоо томtage | Maintenance-free lead acid battery 14.4V, GEL: 14.2V; Lead acid flooded battery: 14.6V | |||
| Калкыма заряддоо тtage | Maintenance-free lead-acid battery, GEL, Lead acid flooded battery: 13.8V | |||
| Төмөн үнtage re-connection (LVR) | Maintenance-fee lead acid battery, GEL, Lead acid flooded battery: 12.6V | |||
| Төмөн үнtagэлектрондук ажыратуу (LVD) | Maintenance-fee lead acid battery, GEL, Lead acid flooded battery: 10.8V | |||
| Статикалык жоготуу | ≤50mA | |||
| Жогорку тtagэлектрондук ажыратуу (HVD) | Lead acid battery 16V (24V x 2) | |||
| Абсорбциялык заряддоонун узактыгы | 2 саат | |||
| Жарыкты башкаруу томtage | 5V/10V | |||
| Заряддоо цикли томtagд тамчы | ≤0.2V | |||
| ЖК температурасы | -20°C~+70°C | |||
| Иштөө температурасы | -20°C~+55°C | |||
| Сактоо температурасы | -30°C~+80°C | |||
| Жумушчу нымдуулук | ≤90% No condensation | |||
| Коргоо классы | IP30 | |||
1-таблица: Техникалык мүнөздөмөлөр
8. Колдонуучунун кеңештери
Re'ден колдонуучунун конкреттүү кеңештери болгон жокviews or Q&A for this product at this time. Always refer to the detailed instructions for optimal performance.
9. Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please contact the seller or refer to the official product webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
