Introduction
Thank you for choosing the SUITU Portable Multi-Functional Car Tire Inflator. This compact and powerful device is designed to quickly and efficiently inflate car tires, bicycle tires, motorcycle tires, sports balls, and other inflatables. Featuring a robust permanent magnet motor, it provides strong inflation power for various needs. This manual will guide you through the setup, operation, and maintenance of your new tire inflator.


Коопсуздук маалыматы
- Always ensure the inflator is connected to a 12V DC power source (car cigarette lighter socket).
- Иштеп турганда үйлөткүчтү кароосуз калтырбаңыз.
- Avoid continuous operation for more than 10-15 minutes to prevent overheating. Allow it to cool down before resuming use.
- Балдар жетпеген жерде сактаңыз.
- Үйлөгүчтү жамгырдын же нымдуулуктун таасирине дуушар кылбаңыз.
- Ensure the tire valve is clean and free of debris before attaching the hose.
Пакеттин мазмуну
- SUITU Car Tire Inflator (Model ST-217)
- Инфляциялык шланг
- Ар кандай сопло адаптерлери (шарлар, велосипеддер ж.б. үчүн)
- User Manual
Жайгашуу
- Prepare the Inflator: Remove the inflator from its packaging. Ensure the inflation hose is securely attached to the pump.
- Кубатка туташуу: Plug the inflator's 12V power cable into your vehicle's cigarette lighter socket. Ensure your vehicle's engine is running to provide stable power.
- Кирүүчү дөңгөлөк клапаны: Дөңгөлөк клапанынан чаң капкагын алып салыңыз.
- Attach Hose to Valve: Securely screw or clip the inflation hose connector onto the tire valve stem. Ensure a tight seal to prevent air leakage.

Иштөө нускамалары
- Учурдагы басымды текшерүү: Once connected, the display (if digital) or analog gauge will show the current tire pressure.
- Set Desired Pressure (Digital Models Only): For models with a digital display, use the '+' and '-' buttons to set your desired tire pressure. The inflator will automatically stop when this pressure is reached.
- Инфляциянын башталышы: Flip the power switch on the inflator to the 'ON' position. The pump will begin to inflate the tire.
- Монитор басымы: Keep an eye on the pressure gauge (digital or analog) during inflation.
- Инфляцияны токтотуу: Once the desired pressure is reached, switch the inflator to the 'OFF' position. For digital models, it will stop automatically.
- Ажыратуу: Carefully detach the inflation hose from the tire valve and replace the dust cap.


Камтылган LED жарык
Some models are equipped with a built-in LED light for illumination during nighttime or low-light conditions. Activate the light by pressing the dedicated light button, usually located on the side of the unit.

Демонстрациялык видео
Video demonstrating the SUITU Car Inflation Pump in use, from retrieving it from the trunk to inflating a flat tire and showcasing its built-in light.
Техникалык тейлөө
- Тазалоо: Инфлятордун сыртын жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
- Сактагыч: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose and power cable are neatly coiled to prevent damage.
- Байланыштарды текшерүү: Periodically inspect the inflation hose and power cable for any signs of wear or damage. Replace if necessary.
Проблемаларды чечүү
- Inflator Not Turning On:
- Check if the 12V power plug is securely inserted into the car's cigarette lighter socket.
- Унаанын кыймылдаткычы иштеп жатканын текшериңиз.
- Унаанын тамеки күйгүзгүчүнүн розеткасынын сактагычын текшериңиз.
- Tire Not Inflating / Slow Inflation:
- Ensure the inflation hose is securely attached to the tire valve without any leaks.
- Электр туташуусунун туруктуу экенин текшериңиз.
- Check if the desired pressure setting (for digital models) is higher than the current tire pressure.
- Ашыкча ысып кетүү:
- If the unit feels hot, turn it off immediately and allow it to cool down for at least 15 minutes before further use.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд аты | СУИТУ |
| Модель аты | СТ-217 |
| Элемент түрү | НАСОСТОР |
| Power Source | Corded Electric (12V DC Car Cigarette Lighter) |
| Origin | Материк Кытай |
| Өлчөмдөрү (болжол менен) | 19см (L) x 14cm (H) x 8cm (W) |
| Салмагы (болжол менен) | 0.731 кг |
| Display Type (Varies by Model) | Analog Gauge or Digital Display |
| Built-in Light (Varies by Model) | Ооба же жок |

Жеткиликтүү Варианттар
- А үлгүсү: No light, analog pointer display, wired.

Модель А - B модели: Lighted pointer display, analog gauge, wired.

Модель В - С модели: Digital display with light, wired.

Модел С
Колдонуучу сунуштар
- Кубат булагы: This inflator is designed to operate using a 12V DC power source, typically found in your car's cigarette lighter socket. It is not compatible with 110V household outlets unless a suitable DC-to-AC power inverter is used (not included).
- Ыкчам инфляция: For optimal performance and quick inflation, ensure your car engine is running while using the pump.
- Алдын ала коюлган басым: If your model has a digital display, take advantage of the pre-set pressure feature to avoid over-inflation.
- Шашылыш жарык: The built-in LED light (on applicable models) is very useful for roadside emergencies at night.
Кепилдик жана колдоо
Кепилдик жөнүндө маалымат жана кардарларды колдоо кызматы үчүн, сатуучунун саясатын караңыз же сатып алган жериңизге кайрылыңыз. Сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.





