Anern Hybrid Solar Inverter Instruction Manual

1. Киришүү

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Anern Hybrid Solar Inverter. This all-in-one inverter combines the functions of an inverter, solar charger, and battery charger, offering uninterrupted power support for various applications. It supports operation both with and without a battery.

The Anern Hybrid Solar Inverter is designed to convert DC power from solar panels or batteries into AC power for household and office loads. It features a pure sine wave output, ensuring compatibility with sensitive electronics.

Anern Hybrid Solar Inverter ECO-6200 front view негизги өзгөчөлүктөрү менен — Figure 1: Anern Hybrid Solar Inverter (ECO-6200 model) highlighting 6200W/4200W power, 120A Max Charging Current, 48VDC Nominal Output Voltage, 500VDC Max DC Voltage, 2 Year Warranty, and CE, RoHS, FC certifications.

2. Коопсуздук маалыматы

WARNING: Please read and understand all instructions and warnings in this manual before installation and operation. Failure to follow these instructions may result in electric shock, fire, severe injury, or death.

Бардык зымдарды квалификациялуу адистер аткарганын текшериңиз.
Do not connect the battery after the utility is turned on.
Verify correct polarity when connecting batteries and solar panels.
Инверторду ажыратпаңыз. Ичинде колдонуучу тейлей турган тетиктер жок.
Инверторду тез күйүүчү материалдардан алыс кармаңыз жана жетиштүү желдетүүнү камсыз кылыңыз.
Always disconnect all power sources (solar, battery, utility) before performing any maintenance or wiring.

Inverter protection features diagram — Figure 2: Inverter protection features including short circuit, overcurrent, overvoltage, undervolvoltage, overload, anti-filling, and over temperature protection.

3. Продукт бүтүп калдыview

The Anern Hybrid Solar Inverter features a user-friendly interface and robust design for reliable performance. Below is an overview of its main components and their functions.

Продукт бүттүview номерленген компоненттери бар диаграмма — 3-сүрөт: Продукт бүттүview and Component Identification.

LCD-Display: Shows system status and parameters.
Status display: Indicates operational status.
Load indicator: Shows the current load level.
Error indicator: Alerts to system faults.
Function keys: For navigating menus and setting parameters.
On/Off Switch: Main power control.
AC input: Connection for utility or generator power.
Main output: Primary AC output for loads.
Second edition (Secondary Output): Secondary AC output for loads.
Battery input: Connection for battery bank.
PV input: Connection for solar panel array.
Anti-dust kit: Helps protect internal components.
RS-232 communication / WiFi connection: For monitoring and control.

Rear panel connections of the Anern Hybrid Solar Inverter — Figure 4: Rear Panel Connections showing AC In, Main Out, Second Out, COMM (BMS, WiFi, RS485, RS232), Battery, and PV In terminals.

4. Орнотуу жана орнотуу

4.1 кутудан чыгаруу

Carefully unpack the inverter and inspect it for any damage. Ensure all components listed in the packing list are present.

Video 1: кутудан чыгаруу жана баштапкы бүтүрүүview Anern гибриддик күн инверторунун.

4.2 Физикалык орнотуу

The inverter should be mounted vertically on a sturdy surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow.

Dimensions: Approximately 450mm (Height) x 350mm (Width) x 110mm (Depth).
Weight: Approximately 12KG.

Продукциянын өлчөмдөрүнүн диаграммасы — Figure 5: Inverter dimensions (Height: 450mm, Width: 350mm, Depth: 110mm).

4.3 Зымдардын схемасы жана туташуулары

Follow the detailed wiring diagram carefully. All connections must be secure and correctly polarized to prevent damage to the inverter or connected devices.

Detailed wiring diagram for solar inverter system — Figure 6: Comprehensive wiring diagram for connecting solar panels, battery, AC input (utility/generator), and AC output (loads) to the inverter.

4.3.1 Батареяны туташтыруу

Battery Type: 48V Lead Acid/Lithium Battery.
Recommended cable and terminal sizes: 2 AWG / Cable: 25mm².
Recommended fuse: 100A.
The inverter supports various battery types including GEL, FLD, Li-ion, and AGM.

Battery charging current and compatible battery types — Figure 7: Max Charging Current (120A) and compatible battery types (GEL, FLD, Li-ion, AGM).

4.3.2 Solar Panel Connection (PV Input)

PV power: 6200W (for 6.2KW model) & 4200W (for 4.2KW model).
Max. PV idle voltage: 500VDC.
MPPT Voltage range: 90VDC-450VDC.
Башталгыч томtage (initial charging): 120VDC.
Recommended cable: 10 AWG / 6mm².
It is recommended to switch solar panels in series.

4.3.3 AC Input (Utility/Generator)

AC input: 230VDC.
Максималдуу AC киргизүү көлөмүtage: 300VAC.
Max. AC-I adestrom: 120A.
Recommended cable: 10AWG / 6mm².
Recommended interrupter: 63A.

4.3.4 AC Output (Loads)

AC output power: 6200W (for 6.2KW model).
AC чыгаруу көлөмүtagд: 220V/230V.
Recommended cable: 10AWG / 6mm².
Recommended interrupter: 63A.
NOTE: The output of the inverter is 230V, and you can use a converter (not included) for 110V devices.

5. Иштөө нускамалары

5.1 Күйгүзүү/өчүрүү

To Power On: Ensure all connections are secure. Turn on the battery breaker, then the solar panel breaker, and finally the AC input breaker (if connected). Press the On/Off switch on the inverter.
To Power Off: Reverse the power-on sequence. First, turn off the AC output breaker, then the AC input breaker, followed by the solar panel breaker, and finally the battery breaker.

5.2 LCD дисплей жана функция баскычтары

The LCD display provides real-time information about the system status, including input voltage, чыгаруу көлөмүtage, battery charge, and load. Use the function keys (up, down, enter, escape) to navigate through menus and adjust settings.

5.3 заряддоо режимдери

The inverter offers four selectable charging modes to optimize battery charging based on your energy sources:

Күн энергиясынын артыкчылыгы: Батареяны заряддоо үчүн күн энергиясына артыкчылык берилет.
Коммуналдык кызмат көрсөтүүлөрдүн артыкчылыгы: Батареяны заряддоо үчүн коммуналдык кубаттуулук артыкчылыктуу болуп саналат.
Solar & Utility: Батареяны заряддоо үчүн күн энергиясы жана коммуналдык энергия колдонулат.
Battery & Solar: Battery power is used first, then supplemented by solar.

Loading modes and output modes diagram — Figure 8: Diagram illustrating 3 Loading Modes (Priority solar energy, Solar+Utility at the same time, Solar Charge Battery ONLY) and 2 Output Modes (Solar Priority Output then Utility, Solar Priority Output then Battery then Electricity Suppliers).

5.4 чыгаруу режимдери

The inverter supports three output modes to manage power delivery to your loads:

Күн энергиясынын артыкчылыгы: Solar power is used first to power loads.
Коммуналдык кызмат көрсөтүүлөрдүн артыкчылыгы: Utility power is used first to power loads.
SBU режими (Күн батареясы менен иштөө): Solar power is used first, then battery power, and finally utility power as a last resort.

5.5 WiFi Monitoring

The inverter supports WiFi monitoring, allowing you to control and monitor the system's operation via a mobile phone application (IOS and Android compatible).

Inverter features and WiFi monitoring diagram — Figure 9: Inverter features including Upgraded MPPT, 120A Max PV Charging, Pure Sine Wave, Built-in Anti Dust Kit, Works with and without battery, Li-ion, and a diagram for WiFi Monitoring via mobile phone.

6. Техникалык тейлөө

Бардык зымдарды туташтыргычтын бекемдигин жана коррозиясын дайыма текшерип туруңуз.
Keep the inverter's ventilation openings clear of dust and debris. The intelligent variable speed fan helps dissipate heat efficiently.
Инвертордун сыртын кургак чүпүрөк менен тазалаңыз. Суюк тазалоочу каражаттарды колдонбоңуз.
LCD дисплейде ката коддору же эскертүүлөр бар-жогун көзөмөлдөңүз.
Ensure batteries are maintained according to their manufacturer's guidelines.

7. Кыйынчылыктарды

Көйгөй	Мүмкүн себеп	Чечим
Инвертор күйбөй жатат	No power from battery or solar; loose connections; faulty switch.	Батареянын көлөмүн текшериңизtage and solar input. Ensure all breakers are on and connections are secure.
AC чыгышы жок	Overload; short circuit; battery low; inverter fault.	Reduce load. Check for short circuits. Charge battery. Check error codes on LCD.
Overload/Over temperature warning	Excessive load; insufficient ventilation.	Reduce connected load. Ensure inverter has adequate airflow and is not in direct sunlight.
Батарея заряддалбай жатат	Solar panels not connected or insufficient sunlight; AC input not present; charging mode incorrect.	Check solar panel connections and output. Verify AC input. Adjust charging mode settings.
WiFi monitoring not working	Incorrect WiFi setup; app issues; network problems.	Ensure inverter WiFi module is correctly installed and configured. Check mobile app and network connection.

Бул чечимдерди колдонуу аракетинен кийин көйгөй чечилбесе, кардарларды колдоо кызматына кайрылыңыз.

8. Техникалык шарттар

Өзгөчөлүк	Спецификация
Модель номери	AN-SCI-EVO (ECO-2000, ECO-3200, ECO-4200, ECO-6200 variants)
Бренд аты	АНЕРН
Чыгуу күчү	1 - 200 KW (Specific models: 2KW, 3.2KW, 4.2KW, 6.2KW)
Номиналдуу Чыгуу Voltage	24V / 48V (моделине жараша)
Output Type	SINGLE (Pure Sine Wave)
Чыгуу жыштыгы	50/60Гц
Output Current	22A (Rated)
Max PV Array Power	6500W (for 6.2KW model)
Max PV No-Load Voltage	500VDC
MPPT Voltage Диапазон	90VDC-450VDC
Max PV Charging Current	120A
Максималдуу AC заряддоо агымы	100A
Өлчөмү	550430210mm (Package size, actual unit is 450x350x110mm)
Салмагы	12KG (Unit weight)
Акылдуу түзмөк	Yes (WIFI available for IOS and Android)
Сертификация	CE, FCC, RoHS
Өзгөчөлүктөрү	Pure sine wave, Built-in 120A MPPT solar controller, Inverter running without battery, High PV input voltage range (60-450VDC), Smart battery charge design, WIFI available.

9. Колдонуучунун кеңештери

Тtage Шайкештик: The inverter's output is 230V. If you have 110V devices, you will need a separate step-down converter (not included).
Battery-less Operation: This inverter is capable of running without a battery, directly from solar or utility power, which can be useful for specific setups.
Мониторинг: Utilize the WiFi monitoring feature for convenient remote access to your system's performance and settings via your smartphone.
Power Variants: Be sure to select the correct power variant (e.g., 2KW, 3.2KW, 4.2KW, 6.2KW) that matches your energy requirements.

10. Кепилдик жана колдоо

The Anern Hybrid Solar Inverter comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your vendor or the manufacturer directly.

Сертификаттар: CE, FCC, RoHS.

ANERN AN-SCI-EVO