Teka духовкасынын эшигин бириктирүүчү колдонмо

Introduction

This manual provides essential information for the installation, operation, and maintenance of your new Teka Oven Door Joint, model 83130601. This component is crucial for maintaining the thermal efficiency and safety of your oven by ensuring a proper seal when the door is closed. Please read these instructions carefully before proceeding with installation or use.

Продукт бүттүview

Figure 1: Teka Oven Door Joint (71.5 cm, 5 hooks)

The Teka Oven Door Joint is a replacement gasket designed to fit various Teka oven models. It is made from durable material to withstand high temperatures and provide an effective seal, preventing heat loss and ensuring consistent cooking temperatures. This specific joint measures 71.5 cm in length and is equipped with 5 hooks for secure attachment to the oven door frame. It serves as a direct substitute for article 83130601.

Техникалык шарттар

Compatible Teka Oven Models:

Орнотуу нускамалары

Биринчи коопсуздук:

• Always disconnect the oven from the power supply before attempting any repairs or installations.
• Ensure the oven is completely cool to prevent burns.
• Зарыл болсо, тиешелүү коргоочу кол каптарды кийиңиз.

Steps for Replacing the Oven Door Joint:

1. Prepare the Oven: Ensure the oven is unplugged and cool. Open the oven door fully.
2. Remove the Old Gasket: Carefully locate the existing door joint. It is typically held in place by hooks or clips around the perimeter of the oven door frame. Gently pull the old gasket away from these attachment points. Note how the old gasket was installed, especially the orientation and how the hooks were seated.
3. Аймакты тазалоо: Once the old gasket is removed, clean the channel or area where the new gasket will sit. Remove any food debris, grease, or residue that might prevent a proper seal.
4. Install the New Gasket:
   • Start by aligning one of the corners or a central hook of the new gasket with its corresponding hole on the oven door frame.
   • Carefully push the hooks into their respective holes around the entire perimeter of the door frame. Ensure each hook is fully seated and the gasket lies flat and evenly.
   • Work your way around the door, ensuring the gasket is not twisted or stretched excessively. The 5 hooks should align perfectly with the designated attachment points.
5. Test the Seal: Once installed, gently close the oven door. The new gasket should create a snug, even seal all around the door. Open and close the door a few times to ensure it operates smoothly and the gasket remains in place.
6. Кубатты кайра туташтыруу: Plug the oven back into the power supply.

If you encounter any difficulty, it is recommended to consult a qualified appliance technician.

Иштөө нускамалары

The oven door joint operates passively by creating a thermal seal when the oven door is closed. No specific user interaction is required beyond ensuring the door closes completely and the gasket is free from obstructions. A properly installed door joint helps maintain the oven's internal temperature, leading to more efficient cooking and reduced energy consumption.

Техникалык тейлөө

• үзгүлтүксүз тазалоо: Periodically inspect and clean the oven door joint. Use a soft cloth dampened with mild soap and water to wipe away any food spills or grease. Avoid harsh abrasive cleaners or sharp objects that could damage the rubber material.
• Кийилүүнү текшерүү: Regularly check the gasket for signs of wear, tears, hardening, or brittleness. A damaged or worn gasket will compromise the oven's seal and efficiency. Replace the gasket if any significant damage is observed.
• Тоскоолдуктарды болтурбоо: Ensure no objects are caught between the oven door and the frame when closing, as this can damage the gasket.

Проблемаларды чечүү

Жалпы маселелер:

• Oven Leaks Heat / Poor Seal:
  • Check Gasket Condition: Inspect the gasket for any visible damage, cracks, hardening, or areas where it's not properly seated.
  • Re-seat Gasket: Ensure all 5 hooks are securely in place and the gasket is evenly positioned around the door frame.
  • Эшик тегиздөө: If the gasket is in good condition and properly seated, the issue might be with the oven door hinges or alignment, which may require professional service.
• Gasket Falling Off:
  • Ensure all hooks are fully inserted into their respective holes.
  • Verify that the correct gasket size and type are installed for your specific oven model.

Колдонуучу сунуштар

• Өлчөмдөрүн текшерүү: Сатып алуудан мурунasing and installing, always double-check the length (71.5 cm) and the number of hooks (5) to ensure compatibility with your specific oven model. Many users inquire about exact measurements (width x length), so precise verification is key.
• Consult Oven Manual: For specific instructions related to your oven model's door removal or gasket replacement, refer to your oven's original instruction manual.

Кепилдик жана колдоо

Кепилдик маалыматы же техникалык колдоо үчүн баштапкы сатып алуу документтерине кайрылыңыз же сатуучу менен түз байланышыңыз. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.