Anern AN-PVI-6000/AN-PVI-10000

Anern AN-PVI Series Photovoltaic Inverter User Manual

Models: AN-PVI-6000, AN-PVI-10000

1. Киришүү

This manual provides essential information for the safe and efficient operation of your Anern AN-PVI Series Photovoltaic Inverter. Please read this manual thoroughly before installation and use, and keep it for future reference.

Anern PVI-6000 Solar Inverter with key features: Dual/Three MPPT, 6/10KW Rated Output Power, 250V Nominal PV Voltage, 500V Maximum DC Voltage, and capability to connect to a small domestic water pump.
Figure 1.1: Anern AN-PVI Series Inverter Overview

Негизги өзгөчөлүктөрү:

  • Таза синус толкунунун чыгышы.
  • Конфигурациялануучу киргизүү томtage range for various applications via LCD settings.
  • Compatibility with mains voltage.
  • Кондиционер калыбына келгенде автоматтык түрдө өчүрүп-күйгүзүү.
  • Integrated protection against overload, over-temperature, and short circuits.
  • Муздак баштоо функциясы.
  • Dual MPPT for 6KW models and three MPPT for 10KW models.
  • Capable of running 3-phase motors: 6KW model supports 3P motors, 10KW model supports 1.5P+3P motors.
  • Designed for full load operation using solar power only.
  • IP21 кирүүгө коргоо.
  • Maximum conversion efficiency of 97%.
  • Important Note: This inverter does not support connection to batteries.

2. Орнотуу жана орнотуу

Proper installation is crucial for the safe and optimal performance of your inverter. Ensure all connections are secure and follow local electrical codes.

2.1 Системалык диаграмма

The following diagram illustrates a typical system setup for the Anern AN-PVI inverter, integrating solar panels, a generator, the utility grid, and various loads, including a water pump system.

System Diagram showing connections between solar panels, generator, grid, inverter, water pump, and household loads.
2.1-сүрөт: Типтүү системанын туташуу схемасы

2.2 Product Appearance and Connection Points

Familiarize yourself with the inverter's physical layout and connection terminals before proceeding with installation.

Арткы view of the inverter showing Utility input, Photovoltaic input, Utility output, Inverter switch, CT backflow prevention interface, and Ground wire terminal.
Figure 2.2: Inverter Connection Ports
  • Utility Input: Connects to the main utility grid.
  • Photovoltaic Input (PV1, PV2, PV3): Connects to your solar panel arrays. Ensure correct polarity and voltage.
  • Utility Output: Connects to your household or facility loads.
  • Inverter Switch (ON/OFF): Инвертор үчүн негизги кубат которгучу.
  • CT Backflow Prevention Interface: For connecting a Current Transformer (CT) module, if required for grid-tie applications in your region.
  • Ground Wire Terminal: Essential for safety grounding.

2.3 Орнотууга чейинки эскертүүлөр

  • The inverter is designed for direct power conversion and cannot be connected to batteries.
  • For PV-only operation (without mains power), the PV voltage must be greater than 150Vdc for the inverter to start.
  • When connecting to a water pump, ensure the inverter's power capacity is 5-7 times greater than the water pump's power. This inverter is suitable only for domestic small water pumps.
  • If connecting to the grid, ensure your local regulations do not require specific grid connection certifications that this inverter may not possess. A CT module may be required; please consult your supplier.

3. Иштөө нускамалары

Follow these steps for safe and effective operation of your inverter.

3.1 Startup and Shutdown Sequence

  • Ишке киргизүү: Always turn on the inverter first, then activate the connected loads.
  • Өчүрүү: Always shut down the connected loads first, then turn off the inverter.

3.2 Output Source Priority Configuration

The inverter allows you to configure the priority of power sources for your loads. This setting can typically be adjusted via the LCD interface.

Diagram illustrating Utility First and Solar First output priority modes. Utility First uses grid power primarily, solar as backup. Solar First uses solar power primarily, grid as backup.
Figure 3.1: Output Source Priority Options
  • Utility First (Default): The inverter will prioritize power from the utility grid to supply the loads. Solar power will only be used to power the loads when utility power is unavailable.
  • Күн биринчи: Solar energy is the primary power source for the loads. If solar energy is insufficient to power all connected loads, the utility grid will supply power simultaneously. If both solar energy and utility power are unavailable, or if solar energy is insufficient and utility power is not available, the loads will not receive power.

3.3 ЖК орнотуулары

The inverter features an LCD display for monitoring system status and configuring various parameters, including the input voltagтиричилик техникалары жана жеке компьютерлер үчүн электрондук диапазон.

Inverter display showing IP21 ingress protection, no battery support, and 97% maximum efficiency.
Figure 3.2: Inverter Display and Key Features

Refer to the on-screen menu for navigation and adjustment of settings.

4. Техникалык тейлөө

Regular maintenance ensures the longevity and reliable performance of your inverter.

  • Тазалоо: Keep the inverter's exterior clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Вентиляция: Ашыкча ысып кетүүнүн алдын алуу үчүн желдетүү тешиктери ачык жана тоскоолдуксуз экенине ынаныңыз.
  • Байланыштары: Periodically check all electrical connections (PV input, AC input, AC output, ground) for tightness and signs of corrosion.
  • Экологиялык шарттар: The inverter has an IP21 ingress protection rating, meaning it is protected against solid objects over 12.5mm and vertically falling drops of water. Avoid exposing the inverter to direct water spray or harsh weather conditions.

5. Кыйынчылыктарды

Бул бөлүм жалпы маселелер боюнча жетекчиликти камсыз кылат. Татаал маселелер боюнча квалификациялуу тейлөө кызматкерлерине кайрылыңыз.

КөйгөйМүмкүн себепЧечим
Inverter does not start with PV power only.PV томtage is below the minimum required (150Vdc).Ensure PV voltage is above 150Vdc. Check solar panel connections and sunlight conditions.
Инвертор күтүлбөгөн жерден өчүп калат.Overload, over-temperature, or short circuit detected.Reduce connected load, check for obstructions to ventilation, inspect wiring for short circuits. Allow inverter to cool down before restarting.
Loads not receiving power.Incorrect startup/shutdown sequence, insufficient solar/utility power, or inverter fault.Follow correct startup sequence (inverter ON, then loads ON). Check power source availability (solar, utility). Verify output source priority setting.
Attempting to connect batteries.Misunderstanding of inverter capabilities.This inverter model does not support battery connections. Do not attempt to connect batteries.

6. Техникалык шарттар

Detailed technical specifications for the Anern AN-PVI-6000W and AN-PVI-10000W models.

Table of detailed specifications for AN-PVI-6000W and AN-PVI-10000W models, covering power, voltage, current, efficiency, and environmental conditions.
Figure 6.1: Technical Specifications Table
ПараметрAN-PVI-6000WAN-PVI-10000W
Генерал
МоделAN-PVI-6000WAN-PVI-10000W
Номиналдуу кубаттуулук6КВА/6КВт10КВА/10КВт
Фаза1 фазалуу кириш/1 фазалык чыгуу
PV Input (DC) - Grid-Tie Operation
Максималдуу PV киргизүү күчү4500 Вт * 24500 Вт * 3
Максималдуу DC Voltage500Vdc
Start-up Voltage / Баштапкы тамактандыруу томtage90Vdc / 120Vdc
MPPT Voltage Диапазон60-450Vdc
MPP Trackers саны / Максималдуу киргизүү агымы2/18A3/18A
Тордун чыгышы (AC)
Номиналдуу Чыгуу Voltage220/230 / 240VAC
Output Voltage Диапазон184-264.5VAC or 195.5-253VAC or 184-264.4VAC (Selectable)
Номиналдык чыгуу агымы26A43A
Power Factor>0.99
Натыйжалуулук
Конверсиянын максималдуу эффективдүүлүгү (DC/AC)97%
AC Input - Off-Grid Operation
AC Start-up Voltage / Auto Restart Voltage120-140VAC / 180VAC
Кабыл алынуучу Input Voltage Диапазон90-280VAC же 170-280VAC
Жыштык диапазону50Гц/60Гц (Авто сезүү)
Максималдуу AC киргизүү агымы40A50A
Физикалык
Өлчөмү (D x W x Y)360x278x106 мм360x310x107 мм
Таза Салмак4.9 кг6.5 кг
Интерфейс
Параллель функцияЖок
Байланыш портуRS232 (WIFI), CAN (Parallel)
Курчап турган чөйрө
Нымдуулук5%дан 95%га чейин Салыштырмалуу нымдуулук (конденсацияланбаган)
IP даражасыIP21
Иштөө температурасы-10 градустан 50 градуска чейин
Сактоо температурасы-15 градустан 60 градуска чейин
Product dimensions for the PVI-6000 model, showing height 360mm, width 278mm, and depth 106mm.
Figure 6.2: Product Dimensions (PVI-6000 shown)
Image showing the inverter connected to a water pump, highlighting its motor driving capability for 3P motors.
Figure 6.3: Inverter Driving a Water Pump

7. Кепилдик жана колдоо

For warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase or contact your seller directly. For technical support or service inquiries, please contact Anern customer service or your authorized dealer.

8. Колдонуучунун кеңештери

  • Verify Specifications: Сатып алуудан мурунasing or installing, always confirm the exact model specifications (e.g., 6KW vs. 10KW) and physical dimensions to ensure it meets your requirements.
  • No Battery Support: Remember that this inverter series is designed for direct power conversion and does not support battery storage. Do not attempt to integrate batteries into the system.
  • Grid-Tie and Off-Grid Functionality: The AN-PVI series supports both grid-tie and off-grid operations. Ensure your setup and configuration match your intended use and local regulations.
  • Water Pump Sizing: If using with a water pump, ensure the inverter's power rating is significantly higher (5-7 times) than the pump's power for optimal performance and to prevent overload. This inverter is primarily for domestic small water pumps.

Тектеш документтер - AN-PVI-6000/AN-PVI-10000

Preview Anern PV Inverter AN-PVI Series User Manual
User manual for the Anern AN-PVI series PV inverters (4000W, 6000W, 10000W, 15000W), covering installation, operation, specifications, and troubleshooting.
Preview Anern Pure Sine Wave гибриддик инверторунун колдонуучу колдонмосу: Орнотуу, коопсуздук жана пайдалануу боюнча колдонмо
Бул колдонуучу колдонмосу Anern Pure Sine Wave гибриддик инвертору үчүн коопсуздук, орнотуу жана иштетүү боюнча кеңири көрсөтмөлөрдү берет. Анда ишенимдүү электр энергиясын камсыздоо чечимдери үчүн шаймандар, зымдар жана системаны орнотуу боюнча маанилүү маалыматтар камтылган.
Preview 2.0KVA/3.2KVA инвертордук MPPT SCC AC кубаттагычынын колдонуучу колдонмосу
MPPT SCC жана AC кубаттагычы бар 2.0KVA/3.2KVA инвертору үчүн кеңири колдонуучу колдонмосу. Орнотуу, иштетүү, функциялар, мүнөздөмөлөр жана мүчүлүштүктөрдү оңдоо камтылган. Коопсуздук боюнча көрсөтмөлөрдү, системанын архитектурасын жана оптималдуу иштөө үчүн деталдуу жөндөөлөрдү камтыйт.
Preview Anern Solar Energy System Wiring Diagram and Components
Detailed wiring diagram and component overview for the Anern solar energy system, including solar panels, battery box, inverter, and load connections.
Preview Anern FGI-S4000 MPPT Solar Inverter User Manual
User manual for the Anern FGI-S4000 MPPT Solar Inverter, detailing installation, operation, safety, and troubleshooting for solar energy storage systems.
Preview Three-Phase Inverter User Manual | Guangzhou Anern Energy Technology
Comprehensive user manual for Guangzhou Anern Energy Technology's three-phase inverters, covering installation, operation, maintenance, and technical specifications. Learn about inverter modes, battery management, and safety guidelines for commercial and industrial applications.