1. Киришүү
The TWO TREES TTS 5.5W Laser Engraver is a versatile and high-precision machine designed for engraving and cutting various materials. Featuring advanced laser beam shaping technology, a robust aluminum alloy body, and multiple connectivity options, it offers an efficient and user-friendly experience for both beginners and experienced users. This manual provides essential information for safe operation, assembly, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Коопсуздук нускамалары
- Лазердик нурлануу: This product emits laser radiation. Avoid direct eye or skin exposure to the laser beam. Always wear appropriate laser safety goggles during operation.
- Балдардын коопсуздугу: Keep the device away from children and ensure they do not operate it without strict adult supervision.
- Вентиляция: Operate the engraver in a well-ventilated area to dissipate fumes and smoke generated during engraving or cutting.
- Өрт коркунучу: Do not leave the machine unattended during operation, especially when cutting flammable materials. Keep a fire extinguisher nearby.
- Материалдык шайкештик: Only engrave or cut materials specified as safe for laser processing. Avoid reflective, transparent, or unknown materials that may cause unpredictable laser behavior.
- Шашылыш токтотуу: Familiarize yourself with the location of the power switch for immediate shutdown in case of an emergency.
- Laser Shielding: The laser module features 360° laser shielding to reduce glare and enhance safety.
3. Пакеттин мазмуну
Таңгактан чыгаргандан кийин, бардык компоненттер бар экенин жана жакшы абалда экендигин текшериңиз:
- TTS 5.5W Laser Engraver Main Unit (partially assembled)
- Лазердик модулу (5.5 Вт)
- Power Adapter (12V 4A DC)
- USB кабели
- Коопсуздук көз айнек
- Fixed Focus Column
- Small Test Materials (e.g., wood sampа)
- Колдонуучунун Колдонмосу (бул документ)
- Assembly Tools (screws, hex keys, etc.)
Note: Optional accessories such as air assist, rotating module, or height raiser are not included in the standard kit and must be purchased separately.
4. Продукт бүтүп калдыview & Өзгөчөлүктөрү
The TTS 5.5W Laser Engraver is engineered for precision and ease of use, incorporating several key features:
- Лазердик технология: Utilizes a 5.5W diode laser with a 0.08mm ultra-fine sharp laser focus, enabling delicate engraving and strong cutting penetration.
- High Speed & Accuracy: Achieves an engraving speed of up to 30000mm/min. Dual Y-axis motors and a belt drive system ensure stable operation and high positioning accuracy.
- Fast Focus Design: Features a fixed focus lens and a height adjustment knob for quick and easy focusing.
- Мыкты курулуш: Built with an aluminum profile structure for durability and stability.
- Smart Control: Equipped with an ESP32 32-bit motherboard, supporting mobile APP control, Wi-Fi, USB connection, and offline use.
- Кеңири шайкештик: Compatible with popular engraving software such as LaserGRBL, LightBurn, Benbox, GrblController, and LiteFire. Supports various file formats including JPG, PNG, DXF, SVG, G-code, NC, and BMP.
- Коопсуздук өзгөчөлүктөрү: Includes a laser filter cover that blocks 98% of UV light and a separate control switch on the motherboard.
- Модулдуулук: Designed with modular components that can be independently replaced or exchanged.
- Integrated Ruler: X-axis and Y-axis feature precise scale lines for convenient measurement of engraving objects.
5. Орнотуу колдонмосу
The TTS 5.5W Laser Engraver comes 60% pre-assembled, making the setup process straightforward.
5.1 Ассамблея
- Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging and place them on a clean, flat surface. Refer to the package contents list to ensure everything is present.
- Рамканы чогултуу: Follow the included quick-start guide or visual instructions to connect the aluminum profile frame components. Ensure all screws are tightened securely.
- Лазердик модулду орнотуу: Mount the laser module onto the designated carriage on the X-axis. Connect the laser module cable to the control board.
- Моторлорду туташтыруу: Ensure the Y-axis motor cables are properly connected to the control board.
- Кубат жана USB туташтыруу: Plug the power adapter into the machine and a power outlet. Connect the USB cable from the engraver to your computer if you plan to use it for control.
- Коопсуздук көз айнектери: Always wear the provided safety goggles before powering on the device.
5.2 Баштапкы күйгүзүү жана фокусту тууралоо
- Күйгүзүү: Flip the main power switch on the control board. The machine should initialize.
- Фокусту тууралоо: Place a small piece of test material (e.g., wood) under the laser module. Use the fixed focus column to set the initial height. Then, turn the spiral knob on the laser module to fine-tune the focus until the laser dot is at its smallest and most intense point on the material surface.
6. Иштөө нускамалары
6.1 Software Installation & Connectivity
The TTS 5.5W supports various software and connection methods:
- Компьютердик программа: Download and install LaserGRBL (for Windows) or LightBurn (for Windows/Mac) from their official websites. Follow the software-specific instructions for driver installation and machine connection.
- Мобилдик тиркемени башкаруу: Download the dedicated mobile application for TWO TREES laser engravers from your device's app store. Connect your engraver via Wi-Fi or Bluetooth as instructed in the app.
- Оффлайн колдонуу: Prepare your G-code files on a TF card and insert it into the engraver's TF card slot for offline operation.
6.2 Гравировка/кесүүгө даярдоо
- Материалды жайгаштыруу: Place your material securely on the engraving bed. Use the integrated X-axis and Y-axis rulers for precise positioning.
- Фокусту тууралоо: Re-adjust the laser focus for the specific material thickness if necessary.
- Программалык камсыздоонун жөндөөлөрү: Open your chosen software (LaserGRBL, LightBurn, or mobile app). Load your design file (JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.). Adjust engraving/cutting parameters (power, speed, passes) according to your material and desired outcome.
- Preview & Frame: Программалык камсыздоонун алдын ала версиясын колдонуңузview function to ensure the design is correctly positioned on your material. Many software also offer a 'frame' function where the laser traces the outline of your design at low power, allowing you to verify placement.
6.3 Ишти баштоо
- Wear Safety Goggles: Always wear your laser safety goggles before initiating any laser operation.
- Жумушту баштоо: Initiate the engraving or cutting process from your software or directly from the machine if using offline mode.
- Прогресс мониторинги: Continuously monitor the machine during operation. Be prepared to stop the process immediately if any issues arise (e.g., fire, material shifting).
- Аяктоо: Once the job is complete, wait for the laser to stop completely before removing the material.
7. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин лазердик оюгучуңуздун узак иштөөсүн жана оптималдуу иштешин камсыздайт.
- Clean Laser Lens: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain engraving quality.
- Таштандыларды тазалоо: Remove any dust, debris, or material residue from the engraving area and moving parts after each use.
- Кыймылдуу бөлүктөрүн майлоо: Apply a small amount of lubricant to the guide rails and lead screws occasionally to ensure smooth movement of the laser module.
- Курдун тартылышын текшерүү: Ensure the drive belts are properly tensioned. Loose belts can affect engraving accuracy.
- Программалык камсыздоонун жаңыртуулары: Check the TWO TREES official website for any available firmware updates for your control board to ensure the latest features and bug fixes.
8. Кыйынчылыктарды
Бул жерде кээ бир жалпы маселелер жана алардын мүмкүн болуучу чечимдери:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Машина иштебей жатат | Power cable loose, power adapter faulty, power switch off | Check all power connections, ensure switch is ON, test adapter if possible. |
| Лазер иштебейт же алсыз | Laser module cable loose, focus incorrect, laser power setting too low, dirty lens | Check laser cable, adjust focus, increase laser power in software, clean lens. |
| Engraving quality is poor/blurry | Incorrect focus, material not flat, machine vibrations, loose belts | Adjust focus, ensure material is flat, place machine on stable surface, check belt tension. |
| Machine not connecting to computer/app | USB cable faulty, incorrect port selected, Wi-Fi/Bluetooth issues, driver not installed | Try different USB port/cable, verify correct COM port in software, check Wi-Fi/Bluetooth settings, reinstall drivers. |
| Machine moves but laser doesn't engrave | Laser module not enabled, power too low, material unsuitable | Ensure laser is enabled in software, increase power, check material compatibility. |
9. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | TTS-55 Pro |
| Бренд аты | ЭКИ ДАРАК |
| Машинанын салмагы | 3кг |
| Engraving Range | 300 x 300 мм |
| Лазердик толкун узундугу | 445 ± 5нм |
| Гравюра тактыгы | 0.1мм |
| Гравюра ылдамдыгы | 30000 мм/мин чейин |
| Программалык камсыздоону колдоо системасы | MAC, Windows |
| Машина материалы | Aluminium Profile + Пластикалык тетиктер |
| Электр камсыздоо | 12V 4A DC |
| Башкаруу кеңеши | LTS ESP32 Motherboard (32-bit) |
| Лазердик күч | 5.5 Вт |
| Киргизүү күчү | 40 Вт |
| Interface Type | USB |
| Программалык камсыздоо File Форматтар | NC, BMP, JPG, PNG, Gcode, DXF, SVG, etc. |
| Колдоого алынган программалык камсыздоо | LaserGRBL, LightBurn, Benbox, GrblController, LiteFire |
| Power Type | European standard / American Standard (Optional) |
| Languages Supported by Software | Кытай, англис, италия, француз, немис |
| Иштөө чөйрөсү | Temperature 5-40 ℃, Humidity 20-60% |
| Гравюра режими | USB Online, TF Card (Application Program, Web Page Control) |
| Carving Materials | Wood, Plastic, Paper, Leather, Sponge Paper, Alumina, etc. |
| Engraving Modes | Graphic Engraving, File Engraving, Scanning Engraving, Contour Engraving, Pixel Engraving |
| CE сертификаты | Ооба |
10. Колдонуучунун кеңештери
- Мобилдик башкаруу: Yes, the TTS 5.5W supports control via a dedicated mobile application, allowing for convenient operation directly from your smartphone or tablet.
- Программалык камсыздоону тандоо: For advanced users, LightBurn is generally recommended for its comprehensive features and compatibility with both Windows and Mac systems. LaserGRBL is a good free option for Windows users.
- Cutting Capabilities: The 5.5W laser is capable of cutting various materials, including up to 8mm thick wood and 5mm acrylic. Adjust power and speed settings for optimal results.
- Honeycomb Board: Consider using a honeycomb working table (sold separately) to protect your desktop from burns and improve cutting results by allowing smoke to dissipate more effectively.
11. Кепилдик жана колдоо
For any technical assistance, warranty claims, or support inquiries, please contact the TWO TREES Global Store directly through your purchase platform or their official website. Ensure you have your product model and purchase details ready when contacting support.
