Instruction Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your replacement drive belt for Electrolux B22/B23 Waxer Engines and other compatible models. Please read these instructions carefully before proceeding with installation to ensure proper function and longevity of the product.

Орнотуу жана орнотуу

The drive belt is a critical component for the proper functioning of your waxer engine. Correct installation is crucial.

1. Биринчи коопсуздук: Always ensure the Electrolux waxer is unplugged from the power source before attempting any installation or maintenance.
2. Айдоо механизмине кирүү: Depending on your specific waxer model, you may need to remove covers or panels to access the motor and drive belt area. Refer to your waxer's original service manual for detailed disassembly instructions.
3. Эски курду алып салуу: Carefully remove the old or broken belt from the motor shaft and the driven pulley. Note its orientation if applicable.
4. Жаңы кур орнотуу: Place the new replacement belt onto the smaller motor shaft pulley first, then stretch it over the larger driven pulley. Ensure the belt is seated correctly in the grooves of both pulleys. Do not force the belt, as this can damage it.
5. Тегиздөөнү текшерүү: Once installed, manually rotate the pulleys a few times to ensure the belt is properly aligned and moves freely without rubbing against any other components.
6. Кайра чогултуу: Алынып салынган капкактарды же панелдерди кайра орнотуңуз.

Иштөө нускамалары

Once the replacement drive belt is correctly installed, the Electrolux waxer engine should operate as intended. The belt itself does not require specific operating instructions beyond being properly installed. Ensure that the waxer is used according to its original manufacturer's guidelines.

Техникалык тейлөө

Regular inspection of the drive belt can help prevent unexpected failures and extend the life of your appliance.

• Визуалдык текшерүү: Periodically check the belt for signs of wear, such as cracks, fraying, glazing, or excessive stretching.
• Чыңалууну текшерүү: Ensure the belt maintains adequate tension. A loose belt can slip, leading to poor performance, while an overly tight belt can put undue stress on motor bearings.
• Тазалык: Keep the belt and pulley area free from dirt, debris, and wax residue, which can cause slippage or premature wear.
• Алмаштыруу: Replace the belt if any significant signs of wear or damage are observed, or if the appliance's performance degrades due to belt issues.

Проблемаларды чечүү

• Appliance Not Running/Motor Humming: Check if the belt is broken or has slipped off the pulleys. Ensure it is correctly installed and tensioned.
• Unusual Noises (Squealing/Grinding): A squealing noise often indicates a loose or worn belt. Grinding might suggest debris in the pulley system or a misaligned belt.
• Poor Performance (e.g., Waxer not rotating effectively): The belt might be slipping due to wear, incorrect tension, or contamination (e.g., wax, oil). Inspect and clean or replace as necessary.

Техникалык шарттар

Note: The belt's specific dimensions are designed to match the listed compatible models. Package dimensions refer to the shipping size.

Колдонуучу сунуштар

• Шайкештикти текшерүү: This belt is confirmed to be compatible with the Electrolux B21 polisher, among other models listed in the specifications. Always verify your model number before purchasing.
• Belt Көлөм: While package dimensions are provided, the belt itself is specifically sized for the compatible Electrolux and Lux waxer engines. If you are unsure about fit, compare your old belt to the product image and ensure your model is listed in the compatibility section.

Кепилдик жана колдоо

For any questions regarding product defects, returns, or technical assistance, please contact the seller directly through the platform where the purchase was made. Keep your order details readily available for faster service.