Introduction
Thank you for choosing the Deli 4V Electric Screwdriver Set. This powerful and versatile tool is designed for various household tasks, including water and electricity installation, electrical maintenance, and home assembly. Featuring a manual and automatic integrated design, a built-in permanent magnet motor, a 2000mAh high-energy lithium battery, and 4-gear torque adjustment, this screwdriver offers convenience and efficiency for your DIY projects.
Пакеттин мазмуну
Сураныч, бардык буюмдар бар экенин текшерүү үчүн пакетти текшериңиз:
- Deli 4V Electric Screwdriver
- USB Type-C кубаттоочу кабель
- Узартуу таякчасы
- Screwdriver Bit Set (e.g., PH2, T10, H4, Slotted 4, etc.)
- Storage Case (for certain models/kits)
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Rated Voltage | 4V |
| Батарея сыйымдуулугу | 2000mAh |
| Макс. Момент | 5 N.m (Hard Torque) |
| Жумшак момент | 0.7 Нм |
| Torque Adjustment | 3 Gears |
| Заряддоо интерфейси | Type-C |
| Заряддоо Voltage/Current | Макс 5V 2A |
| Заряддоо убактысы | 1-2 саат |
| Forward/Reverse Function | Ооба |
| Батарея деңгээл дисплей | Ооба |
| LED Off Delay | Ооба |
| Салмагы | 0.4кг |
| Өлчөмдөрү (болжол менен) | 180 мм (узундугу) x 35 мм (туурасы) |
Жайгашуу
1. Баштапкы заряддоо
- Before first use, fully charge the screwdriver.
- Connect the provided USB Type-C charging cable to the charging port at the base of the screwdriver.
- Connect the other end of the USB cable to a compatible 5V 2A USB power adapter (not included).
- The battery level indicator lights will show charging progress. A full charge typically takes 1-2 hours.
2. Бурагыч биттерин орнотуу
- Ишиңизге ылайыктуу бурагычты тандаңыз.
- Insert the bit into the magnetic collet at the front of the screwdriver. The strong magnetic adsorption will hold the bit securely in place.
- For extended reach, first insert the extension rod into the collet, then insert the desired bit into the extension rod.
Иштөө нускамалары
1. Күйгүзүү/өчүрүү жана багытты башкаруу
- To Power On/Tighten Screws (Forward): Press and hold the forward button (usually indicated by an arrow pointing right or 'F'). The screwdriver will start rotating to tighten screws.
- To Loosen Screws (Reverse): Press and hold the reverse button (usually indicated by an arrow pointing left or 'R'). The screwdriver will rotate in the opposite direction to loosen screws.
- Өчүрүү: Release the button to stop the screwdriver. The tool operates on a 'push to start, release to stop' mechanism.
2. Моментти тууралоо
The screwdriver features 3 gears for torque adjustment, allowing you to select the appropriate power for different tasks and materials:
- 1st Gear: 0.7-2 N.m (for delicate tasks or small screws)
- 2nd Gear: 2-3.5 N.m (for general assembly and medium screws)
- 3rd Gear: 3.5-5 N.m (for heavier duty tasks or larger screws)
Use the torque adjustment buttons (usually indicated by '+' and '-' or up/down arrows) to cycle through the gears. The current gear setting may be indicated by LED lights.
3. Кол менен иштөө
In addition to electric operation, the screwdriver can also be used manually. Simply hold the handle and turn it left or right to manually tighten or loosen screws, providing greater control for precision tasks or when the battery is depleted.
4. LED жарыктандыруу
The screwdriver is equipped with dual LED lighting that automatically turns on when the tool is in operation, illuminating your work area and allowing you to work effectively in dark or poorly lit conditions.
5. Тиркемелер
This electric screwdriver is suitable for a wide range of applications:
- Furniture installation
- Digital device repair
- Toy assembly and repair
- Sports equipment maintenance
- General home DIY tasks
Техникалык тейлөө
1. Батареяны заряддоо
- Charge the screwdriver when the battery indicator shows low power.
- Always use a compatible 5V 2A USB power adapter and the provided Type-C cable for charging.
- Батареянын иштөө мөөнөтүн узартуу үчүн аны ашыкча заряддоодон же толугу менен жарактан чыгаруудан качыңыз.
- The 2000mAh lithium battery is designed with four-fold protection: overcurrent, voltage, over temperature, and charge/discharge protection.
2. Тазалоо жана сактоо
- After each use, wipe the screwdriver and bits with a clean, dry cloth to remove dust and debris.
- Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
- Store the screwdriver and its accessories in the provided case in a cool, dry place, away from direct sunlight and moisture.
- Балдар жетпеген жерде сактаңыз.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Бурагыч күйбөйт. | Батарея түгөнүп калды. | Charge the battery fully (1-2 hours). |
| Бурагыч кубаты жок же колдонуу учурунда токтоп калат. | Low battery charge. Incorrect torque setting. | Recharge the battery. Adjust to a higher torque setting if needed. |
| Screwdriver bit slips or doesn't grip screw. | Incorrect bit size/type. Worn bit. | Ensure you are using the correct bit for the screw head. Replace worn bits. |
| LED жарыгы иштебейт. | Screwdriver not in operation. Faulty LED. | Ensure the screwdriver is operating. If still not working, contact support. |
Колдонуучу сунуштар
- Пакеттин мазмунун текшерүү: Upon receiving your screwdriver set, carefully check all items against the 'Package Contents' section to ensure you have received the screwdriver, charging cable, extension rod, and all specified bits, including the storage case if applicable to your purchased kit.
- Оптималдуу момент: Always start with a lower torque setting and gradually increase it if more power is needed. This prevents overtightening and stripping screws, especially with delicate materials.
- Manual Finish: For very tight screws or when precise control is required, use the manual operation feature to finish tightening or loosening after initial electric use.
Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.
