MiBoxer T1 4-Zone 2.4GHz Touch Panel Remote Switch Controller User Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of the MiBoxer T1 4-Zone 2.4GHz Touch Panel Remote Switch Controller. This controller is designed for single-color LED lamps, strips, and FCOB lights, offering brightness adjustment and individual 4-zone control.

Image: MiBoxer T1 4-Zone Panel Remote (Brightness) - Front view of the touch panel remote.

2. Өзгөчөлүктөрү

• High precision capacitive touch screen IC for stable operation.
• 2.4GHz RF wireless control for long-distance control (up to 30m in barrier-free space).
• Low power consumption and high speed transmitting rate.
• Compatible with Mi-Light 4-zone Single White LED bulbs and controllers.
• 1-100% brightness dimming capability.
• 4-zone individual control, allowing each zone to control countless lamps or controllers.
• High-end tempered glass panel, resistant to scratching and crushing.
• Audible feedback when touching buttons (touch slider has no sound).
• 60-second delay OFF function.

Image: Key features of the MiBoxer T1, highlighting 4-zone compatibility, tempered glass panel, and 1-100% brightness dimming.

Сүрөт: бүттүview of 2.4GHz wireless control and multi-functional aspects including brightness, 60S delay OFF, 2.4G, remote control distance, sensitive touching, and scratch resistance.

3. Техникалык шарттар

Image: Detailed parameter table and physical dimensions of the T1 controller and its packaging.

4. Орнотуу

T Series Installation/Dismantlement

1. Install the bottom case into the wall. Standard bottom cases are suitable.
2. Fix the controller base onto the bottom case with screws.
3. Click the upper side of the glass panel onto the controller base, then press the lower side slightly to secure it.
4. To dismantle, plug into the below bayonet with a screwdriver and gently pry up to remove the controller.

Image: Step-by-step visual guide for installing and dismantling the T series panel remote.

5. Операция

Button Functions (T1 Single Color Brightness)

Image: Diagram illustrating the layout and function of each button on the T1 panel remote.

• Караңгылыктын сыдырмасы: Touch the dimming slider to change the brightness from 1% to 100%. (Note: Touch slider has no sound feedback).
• БААРЫ КҮЙҮК: Touch to turn on all linked lights. Long press for 5 seconds to turn ON with an indicating sound.
• БАРДЫК ӨЧҮРҮҮ: Touch to turn off all linked lights. Long press for 5 seconds to turn OFF with an indicating sound.
• Zone ON (1-4): Touch to turn on zone-linked lights.
• Аймак ӨЧҮРҮҮ (1-4): Touch to turn off zone-linked lights.
• 60S Delay OFF: When the light is ON, press "60S Delay OFF" to automatically turn off the light after 60 seconds.

Image: Detailed explanation of each button's function for the T1 panel remote.

Image: Visual representation of the 60S Delay OFF function and the concept of 4-zone individual control.

Linking Instructions (T1)

1. Switch off the light you wish to link. Wait for 10 seconds, then switch it on again.
2. When the light is ON, short press any of the Zone ON buttons (1, 2, 3, or 4) three times within 3 seconds.
3. The light will blink 3 times slowly, indicating that the linking process is successful.

Important: If the light does not blink slowly, the linking has failed. Please switch off the light again and repeat the steps.

Image: Visual guide for linking the T1 panel remote to a light, showing power cycle and button presses.

Unlinking Instructions (T1)

1. Switch off the light you wish to unlink. Wait for 10 seconds, then switch it on again.
2. When the light is ON, short press the corresponding Zone ON button (1, 2, 3, or 4) five times within 3 seconds.
3. The light will blink 10 times quickly, meaning the unlinking is successful.

Important: Unlinking must be performed for the same zone that was linked. If the light does not blink quickly, the unlinking has failed. Please switch off the light again and repeat the steps.

Image: Visual guide for unlinking the T1 panel remote from a light, showing power cycle and button presses.

6. Техникалык тейлөө

• Чыңалган айнек панелди жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Ensure the device is kept in a dry environment and away from direct sunlight or extreme temperatures.
• Regularly check the connections to ensure they are secure.

7. Кыйынчылыктарды

Жалпы маселелер жана чечимдер

Light does not link successfully:

• Ensure the light is powered off for at least 10 seconds before powering it on again for linking.
• Verify that the Zone ON button is pressed exactly three times within 3 seconds after the light is turned on.
• Check if the light blinks slowly three times to confirm successful linking. If not, repeat the process.
• Confirm that the light being linked is a compatible Mi-Light 4-zone Single White series product.

Light does not unlink successfully:

• Ensure the light is powered off for at least 10 seconds before powering it on again for unlinking.
• Verify that the corresponding Zone ON button (for the linked zone) is pressed exactly five times within 3 seconds after the light is turned on.
• Check if the light blinks quickly ten times to confirm successful unlinking. If not, repeat the process.
• Ensure you are attempting to unlink from the same zone that was originally linked.

Контроллер жооп бербей жатат:

• Check the power supply to the controller (AC100-240V).
• Ensure there are no strong magnetic fields or metal objects obstructing the 2.4GHz signal within the 30m control distance.
• Verify that the wiring is correct as per installation instructions.

8. Коопсуздук чаралары

• Always check the cable and ensure the circuit is correct before powering on the device.
• Handle the T series glass panel with care during installation to avoid breakage.
• Do not use lighting fixtures around metal areas or in high magnetic fields, as this may adversely affect the control distance and performance.
• Бул продукт ички колдонуу үчүн гана иштелип чыккан.
• Do not attempt to repair or modify the device yourself. Refer to qualified personnel for service.

Image: Important attention points regarding cable check, careful installation, and avoiding magnetic interference. Also shows CE, UKCA, and RoHS certifications.

9. Колдонуучунун кеңештери

• For optimal performance, ensure the controller is installed in a location free from obstructions that could interfere with the 2.4GHz signal.
• When linking multiple lights, it's often easier to link them one by one to avoid confusion.
• The touch sensitivity is high; a light touch is usually sufficient for button activation.

10. Кепилдик жана колдоо

The MiBoxer T1 controller comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty validation.

For more information, you may visit the official MiBoxer or Mi-Light webсайт.