Introduction
Thank you for choosing Herdio HCS628PRS 6.5-inch Recessed Ceiling Speakers. These two-way, full-range stereo speakers are designed to provide high-fidelity audio for various indoor and enclosed outdoor spaces, including bedrooms, kitchens, offices, shops, classrooms, and covered porches. Their flush-mount design allows for seamless integration into your environment. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.
Коопсуздук маалыматы
- Always ensure power is disconnected from the amplifier or audio system before making any connections.
- Do not expose speakers to direct water or extreme moisture. While moisture-resistant, they are not waterproof.
- Ensure proper wire gauge is used for speaker connections to prevent overheating and signal loss.
- When cutting holes for installation, be aware of electrical wiring, plumbing, or other obstructions behind the ceiling or wall.
- Seek professional assistance if you are unsure about any installation steps.
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- 6.5-inch Ceiling Speakers (x2)
- Speaker Connection Wires (x2)
- Колдонуучунун колдонмосу (x1)
- Cutout Template (x1)
- Gaskets (x2)
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель аты | HCS628PRS |
| Динамик түрү | 6.5-inch Two-Way Recessed Ceiling Speaker |
| Out Power (Peak) | 300W (per pair, 150W each speaker) |
| Аудио сезгичтиги | 89дБ |
| Импеданс | 8 Ом |
| Жыштык диапазону | 50Гц-20КГц |
| Спикердин жалпы диаметри | 7.5 дюйм (19 см) |
| Speaker Grill Diameter | 6.30 дюйм (16 см) |
| Cut Out диаметри | 7.5 дюйм (19 см) |
| Монтаждоо тереңдиги | 3.93 дюйм (10 см) |
| Элемент Салмагы | 2.3kg (per speaker) |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Түс | Ак |
| Сертификация | CE |
| Сунушталган Колдонуулар | Music, Kitchen, Indoor, Outdoor (Covered Porches) |
Орнотуу
These speakers are designed for flush mounting in ceilings or walls. An external amplifier is required to power these passive speakers (not included).
1. Пландоо жана даярдоо
- Жайгашкан жерди тандоо: Select a suitable location in your ceiling or wall, ensuring there are no obstructions (e.g., studs, joists, electrical wires, pipes) behind the mounting surface.
- Өчүрүү: Turn off power to the area where you will be installing the speakers.
- Куралдар чогултуу: You will need a drill, drywall saw (or similar cutting tool), wire strippers, and a screwdriver.
2. Creating the Cutout
- Use the provided cutout template to mark the exact cutting area on your ceiling or wall.
- Carefully cut along the marked line using a drywall saw. Ensure the hole is clean and precise for a snug fit.
3. Динамиктердин зымдары
The speakers require connection to an amplifier. Use the provided speaker cables or appropriate gauge speaker wire for your setup.
- Динамик зымдарын сиздин amplifier to each speaker cutout. Leave enough slack for easy connection.
- Strip approximately 1/2 inch (1.2 cm) of insulation from the ends of the speaker wires.
- Connect the speaker wires to the terminals on the back of the speaker. The red wire connects to the positive (+) terminal, and the black wire connects to the negative (-) terminal. Ensure a secure connection.
4. Баяндамачыларды орнотуу
- Carefully insert the speaker into the cutout.
- The speaker features spring-loaded mounting buckles. Break the left and right mounting buckles up and snap them into the ceiling/wall. These will secure the speaker in place.
- Ensure the speaker is flush with the surface and securely fastened.
- Магниттик торду динамикке бекитиңиз.
For a visual guide, please refer to the installation section in the provided video.
Операция
Динамиктерди бекем орнотуп, зымдар менен туташтыргандан кийин ampөмүр берүүчү:
- Connect your audio source (e.g., receiver, media player) to the ampөмүрлүү.
- Өзүңүздү күйгүзүңүз ampкөтөргүч жана аудио булагы.
- Үндү жана аудио жөндөөлөрүн тууралаңыз ampкаалаган угуу деңгээлине көтөргүчтү коюңуз.
These are passive speakers, meaning they do not have built-in amplification and must be connected to an external ampкөтөргүч же кабыл алгыч.
Техникалык тейлөө
- Тазалоо: Use a soft, dry cloth to clean the speaker grilles and surrounding areas. Do not use harsh chemicals or abrasive cleaners.
- Нымдуулук: While moisture-resistant, avoid direct exposure to water. If used in a bathroom or covered porch, ensure adequate ventilation and protection from splashes.
- Текшерүү: Periodically check the speaker connections and mounting for any signs of loosening or damage.
Проблемаларды чечүү
Үн жок
- Байланыштарды текшерүү: Бардык динамик зымдары динамиктерге жана amplifier, with correct polarity (+ to + and - to -).
- Ampөмүр кубаты: Сиздин экенин текшериңиз ampкөтөргүч күйгүзүлгөн жана туура иштеп жатат.
- Булак тандоо: Confirm that the correct audio input source is selected on your ampөмүрлүү.
- Үн деңгээли: Check the volume levels on both your ampкөтөргүч жана аудио булагы.
Distorted Sound
- Volume Too High: Сиздин үнүңүздү азайтыңыз ampкөтөргүч жана аудио булагы.
- Туура эмес зымдар: Recheck speaker wire connections for correct polarity. Incorrect polarity can cause phase issues and distorted sound.
- Amplifier Overload: Сиздин камсыз кылуу amplifier's power output matches the speaker's power handling capabilities. An underpowered or overpowered amplifier can cause distortion.
- Damaged Speaker: If distortion persists, the speaker unit may be damaged.
Бир Спикер иштебейт
- Swap Speakers: Temporarily swap the non-working speaker with a working one. If the issue moves with the speaker, the speaker itself may be faulty. If the issue stays with the channel, the wiring or amplifier channel may be the problem.
- Зымдарды текшерүү: Inspect the wiring for the affected speaker for any breaks or loose connections.
Колдонуучу сунуштар
- Ampкөтөргүч дал келүү: For the best sound quality and to prevent damage, ensure your amplifier's impedance (8 Ohms) and power output (up to 150W per channel) are compatible with these speakers.
- Спикердин жайгашуусу: For optimal stereo imaging, place speakers equidistant from the primary listening area. For wider sound dispersion in larger rooms, consider multiple pairs.
- Зым сапаты: Use high-quality speaker wire of appropriate gauge for your cable run length to minimize signal loss and ensure clear audio.
- Acoustic Seal: Ensure the speakers are securely mounted and the gaskets are properly seated to prevent air leaks, which can negatively impact bass response.
Кепилдик жана колдоо
Herdio products are manufactured to high-quality standards. For any issues or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.
