TWO TREES TC20 Laser Module User Manual

1. Киришүү

The TWO TREES TC20 Laser Module is a high-performance 20W diode laser designed for precision engraving and cutting. It is specifically engineered to be compatible with the TWO TREES TTC450 and TTC450 Pro series laser engraving machines, enhancing their capabilities for a wide range of materials and applications. Featuring advanced compressed spot technology and efficient air-cooled heat dissipation, the TC20 module delivers clean, thin, and deep cuts with high accuracy.

2. Коопсуздук маалыматы

WARNING: LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. KEEP AWAY FROM CHILDREN.

• Always wear the provided laser protective glasses when operating the laser module.
• Түтүндү жана түтүндү жок кылуу үчүн жумуш ордун жакшы желдетип туруңуз.
• Never leave the laser module operating unattended.
• Do not point the laser at reflective surfaces or at people/animals.
• Машинанын туура жерге туташтырылышын камсыз кылыңыз.
• Лазердик гравировкалоочу машинаңызды авариялык өчүрүү жол-жоболору менен таанышып алыңыз.

3. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• TC20W Laser Module x1
• M5*15 ​​Бурамалар x4
• 7-shaped Handle Screw x1
• Laser Protective Glasses x1
• 2.0мм Аллен ачкычы x1
• M3*6 ​​Бурамалар x4
• TTC450 Pro Laser Connection Cable x1
• Laser Backplate B x1
• TTC450 Laser Connection Cable x1
• 3.0мм Аллен ачкычы x1
• Fixed Focus Block x1 (for <=15mm, >=16mm, >=20mm materials)
• 24V 5A адаптер x1
• Laser Backplate A x1
• Электр кабели x1

4. Продукттун спецификациялары

5. Орнотуу колдонмосу

1. Модуль орнотуу

   Attach the TC20 Laser Module to your TTC450 or TTC450 Pro machine using the provided M5*15 screws and laser backplates (A and B). Ensure the module is securely fastened to prevent movement during operation.

   

2. Электр байланышы

   Connect the TC20 Laser Module to the TTC450/TTC450 Pro control board using the appropriate laser connection cable. Then, connect the 24V 5A adapter to the module and plug it into a power outlet using the power cord.

3. Air Pump Connection (Optional but Recommended)

   The TC20 module features a built-in air duct. For cleaner cuts and improved aesthetics, connect an external air pump (purchased separately) to the module's air nozzle using a hose. This provides air assist to prevent burnt edges.

   

4. Фокусту тууралоо

   Utilize the innovative slider focusing mechanism and the Z-axis motor of your TTC450 machine for precise focus control. Use the fixed focus block to set the correct focal length (8mm) for your material. Proper focus is crucial for achieving the advertised 0.08mm compressed spot and optimal engraving/cutting results.

   

6. Иштөө нускамалары

1. Программалык камсыздоонун шайкештиги

   The TC20 Laser Module supports a wide range of engraving software, including LightBurn and LaserGRBL. LightBurn supports various file formats such as NC, BMP, JPG, PNG, and DXF. LaserGRBL is a free laser engraving software option.

   

2. Material Versatility

   The TC20 module is capable of engraving and cutting a broad spectrum of materials. These include, but are not limited to: wood, plastic, paper, leather, bamboo, sponge paper, stainless steel, snowboard material, acrylic, ceramic, fabrics, stone, and glass.

   

   

3. Гравюра жана кесүү

   With its 20W optical power, the TC20 module provides high-precision engraving and cutting functions. It can effortlessly cut 15mm pine boards in a single pass. Adjust laser power and speed settings in your software according to the material and desired effect.

   

4. Utilizing Air Assist

   For optimal cutting and engraving results, especially on thicker materials or for intricate designs, using an air pump with the built-in air duct is highly recommended. Air assist helps to blow away debris and smoke from the laser's path, resulting in cleaner surfaces and smoother edges, preventing burnt marks.

   

7. Техникалык тейлөө

• Жылуулук диссипациясы

  The TC20 laser module is equipped with an air-cooled heat dissipation system, featuring fan settings on both sides. Ensure that the fans are free from dust and obstructions to maintain optimal cooling and prolong the lifespan of the module. Regularly clean the fan vents.

  

• Линзаны тазалоо

  Periodically inspect the laser lens for any dust or debris. Gently clean the lens with a soft, lint-free cloth and a suitable lens cleaning solution to ensure clear light transmission and consistent performance. Always power off the module before cleaning.

• Жалпы тазалоо

  Keep the exterior of the laser module clean and free from dust and material residue. Use a dry or slightly damp cloth for cleaning. Avoid using harsh chemicals that could damage the module's casing.

8. Кыйынчылыктарды

• Лазер күйбөйт:
  • Check all power connections to the module and the machine.
  • Ensure the laser connection cable is securely attached.
  • Verify that the software settings are correctly configured for laser operation.
  • Confirm the emergency stop button on your machine is not engaged.
• Гравюра/кесүү сапаты начар:
  • Re-check the laser focus. An incorrect focal length is a common cause of poor quality.
  • Adjust laser power and speed settings in your software. Different materials require different settings.
  • Ensure the material is flat and securely held in place.
  • Лазердик линза кир болуп көрүнсө, тазалаңыз.
  • Consider using air assist for cleaner cuts and engravings.
• Модулдун ысып кетиши:
  • Ensure the cooling fans are operating correctly and are not obstructed.
  • Verify that the ambient temperature of your workspace is within acceptable limits.
  • Reduce laser power or increase cooling time between operations if necessary.

9. Колдонуучунун кеңештери

• Engraving on Fabric: Yes, the TC20 Laser Module is capable of engraving on fabric. Experiment with lower power settings and higher speeds to achieve desired results without burning through the material.
• Сыноо параметрлери: Always perform small test engravings or cuts on scrap material before starting a large project to fine-tune your power and speed settings.
• Вентиляция: Always ensure adequate ventilation, especially when working with materials that produce strong fumes.

10. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the official TWO TREES webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.