ANCEL LD700 OBD2 Scanner User Manual

1. Киришүү

The ANCEL LD700 is a professional multi-system diagnostic tool specifically designed for Land Rover and Jaguar (JLR) vehicles. It offers comprehensive OE-level diagnostics for all accessible vehicle systems and modules, along with over 14 special reset and maintenance functions. This device is compatible with most OBD II standard protocol compliant JLR vehicles manufactured after 1995, and also supports engine checks for all OBD II compliant US, European, and Asian vehicles from 1996 onwards. The LD700 aims to provide an efficient and cost-effective solution for vehicle diagnostics and maintenance.

2. Орнотуу жана биринчи колдонуу

2.1 Пакеттин мазмуну

Before starting, please verify that all items are present in your package:

• ANCEL LD700 Diagnostic Scanner x1
• USB кабели x1
• Колдонуучунун колдонмосу x1

Image: Contents of the ANCEL LD700 package.

2.2 Аппаратты туташтыруу

1. Locate the vehicle's 16-pin Data Link Connector (DLC), usually found under the dashboard on the driver's side.
2. Унаанын от алдыруу системасы "КҮЙҮК" абалында экенин текшериңиз (кыймылдаткыч өчүрүлгөн болушу мүмкүн).
3. Plug the ANCEL LD700's OBD-II connector firmly into the vehicle's DLC. The device will power on automatically.

2.3 Баштапкы орнотуу жана тилди тандоо

Upon first power-on, you may need to configure basic settings:

• Navigate to the 'Tool Setup' menu using the device's keypad.
• Select 'Language' and choose your preferred language from the 12 supported options: English, French, German, Spanish, Italian, Russian, Portuguese, Finnish, Polish, Danish, Swedish, Norwegian.
• Other settings like 'Beeper', 'Instructions (Display at start up)', 'Unit of Measure', and 'Skin Style' can also be adjusted here.

Image: ANCEL LD700 'Tool Setup' menu displaying language options.

3. Иштөө нускамалары

3.1 Негизги навигация

The ANCEL LD700 features a user-friendly interface with flexible keypads for easy navigation:

• Use the directional arrows (Up, Down, Left, Right) to move through menus and options.
• Press 'OK' to confirm a selection or enter a submenu.
• Press 'ESC' to go back to the previous screen or cancel an operation.
• 'READ DTC' button for quick fault code retrieval.
• 'I/M' button for quick I/M Readiness status check.

3.2 Full System Diagnostics for JLR Vehicles

The LD700 provides in-depth, OE-level diagnostics for all accessible systems and modules in Land Rover and Jaguar vehicles. This allows for quick identification and troubleshooting of fault codes across various vehicle systems.

1. From the main menu, select 'For JLR' or the relevant diagnostic option for your vehicle.
2. The device may automatically detect the vehicle's VIN (Vehicle Identification Number) or prompt you to enter it manually.
3. Once connected, you can choose to perform a 'Full System Scan' or select specific modules (e.g., Engine, Transmission, ABS, SRS, Battery, Immobilizer, Suspension, TPMS, Brake) for diagnosis.
4. The scanner will display fault codes (DTCs) and live data from the selected systems.

Image: ANCEL LD700 performing OE-Level Full System Diagnostics for JLR vehicles.

3.3 OBDII функциялары

The LD700 supports all standard OBDII functions for comprehensive engine diagnostics:

• ECU маалыматын алуу: Reads and displays control system module information from the ECU.
• Ката коддорун окуңуз: Identifies and displays current, permanent, and pending diagnostic trouble codes (DTCs) from the vehicle's engine system.
• Erase Fault Codes: Clears DTCs from the vehicle's system, turning off the Malfunction Indicator Lamp (MIL) оңдоодон кийин.
• Review Жандуу маалыматтар: Displays real-time data streams in text or graphic format, allowing monitoring of various sensor readings and system parameters.
• I/M даярдык монитору: Provides a quick check of the vehicle's emission-related systems to determine if they are ready for an inspection/maintenance test.
• EVAP системасы сыноо: Allows for a leak test of the vehicle's Evaporative Emission Control System to prevent fuel vapor escape.
• Vehicle Information (Auto VIN): Automatically retrieves vehicle information such as VIN, calibration ID, and calibration verification numbers.

Image: ANCEL LD700 'Diagnostic Menu' showing various OBDII functions.

3.4 Авто VIN сканерлөө

The LD700 features an automatic VIN detection function, allowing the scanner to quickly identify vehicle information (make, year, model) with a single click. This streamlines the diagnostic process by eliminating the need for manual input. If auto-detection fails, you can always manually input the vehicle details.

Image: ANCEL LD700 performing an Auto VIN scan.

4. Maintenance and Reset Functions (JLR Specific)

The ANCEL LD700 offers over 14 special maintenance and reset functions tailored for JLR vehicles:

• Майды калыбына келтирүү: Май кызматын баштапкы абалга келтиретamp and calculates the next oil change interval after an oil change.
• Дроссельди адаптациялоо: Re-learns and adapts the throttle sensor position after clearing or repairing the electronic throttle.
• BMS баштапкы абалга келтирүү: Re-matches and registers the battery, clears fault codes, and resets the Battery Management System (BMS) module when the battery shows aging or damage.
• Батареяны каттоо: Registers new battery information with the vehicle's system after a battery replacement.
• EPB баштапкы абалга келтирүү (электрондук тормоз): Performs maintenance of the electronic parking brake system, including resetting the brake pad warning light after replacement.
• TPMSти баштапкы абалга келтирүү (дөңгөлөк басымын көзөмөлдөө системасы): Resets the tire pressure system after tire or sensor replacement.
• SAS калибрлөөсү (Рулду башкаруу бурчун сенсор): Calibrates the steering angle sensor to clear fault memories.
• ABS кан агуу: Bleeds the brake system to remove air from the ABS, ensuring a firm brake pedal.
• EGR Reset (Exhaust Gas Recirculation): Helps reduce engine exhaust emissions and nitrogen oxide formation.
• DPF регенерациясы (Дизель бөлүкчөлөрүнүн чыпкасы): Initiates diesel filter cleaning to clear blockages and reset the DPF light.
• Инжектор коддоо: Writes new injector codes to the ECU after injector replacement for proper cylinder identification and reduced fuel emissions.
• Suspension Calibration: Adjusts vehicle height, necessary after replacing height sensors or control modules in the air suspension system.
• Transmissions Learning: Allows the automatic transmission to learn and adapt to driving patterns for improved performance and longevity.

Note: Please send us your vehicle's VIN number and the specific functions you intend to use to check compatibility before performing these operations.

Сүрөт: бүттүview of hot special functions available on the ANCEL LD700.

5. Кыйынчылыктарды

5.1 Жалпы маселелер жана чечимдер

• Түзмөк күйбөйт: Ensure the OBD-II connector is securely plugged into the vehicle's DLC and the vehicle's ignition is in the 'ON' position. Check the vehicle's fuse for the OBD-II port if necessary.
• Унаа менен байланыш катасы: Verify the vehicle is OBD-II compliant and manufactured after 1996 (for engine diagnostics) or 1995 (for JLR specific systems). Ensure the connection is stable. Try another OBD-II compliant vehicle to rule out device issues.
• Unable to perform a specific function: Some advanced functions may require specific vehicle conditions (e.g., engine off, ignition on, specific temperature). Refer to the on-screen prompts. Ensure your vehicle model and year are supported for that specific function.
• Screen freezes or device is unresponsive: Disconnect the device from the vehicle, wait a few seconds, and reconnect. If the issue persists, perform a software update.

5.2 Online Feedback and Technical Support

If you encounter any issues that cannot be resolved using the troubleshooting steps above, the ANCEL LD700 provides an online feedback feature. You can report problems directly through the device, and ANCEL's professional technical team will assist you. Remote technical support is also available to ensure your issues are resolved effectively.

6. Техникалык шарттар

6.1 Унаа шайкештиги

• JLR Specific Systems: Compatible with most OBD II standard protocol compliant Land Rover and Jaguar vehicles after 1995.
• Engine Diagnostics (OBDII): Compatible with all OBD II standard protocol compliant US, European, and Asian vehicles after 1996.

Image: Detailed compatibility list for JLR group vehicles.

7. Кепилдик жана колдоо

7.1 Өмүр бою акысыз программалык камсыздоону жаңыртуу

The ANCEL LD700 comes with lifetime free software updates. This ensures that your diagnostic tool always has the latest vehicle coverage, bug fixes, and new features without any additional subscription fees. To update your device, visit www.anceltech.com жана берилген көрсөтмөлөрдү аткарыңыз.

7.2 Техникалык колдоо

ANCEL provides professional technical support for the LD700. If you encounter any difficulties or have questions regarding the device's operation or specific vehicle compatibility, you can utilize the online feedback feature on the device or contact ANCEL's customer support directly. Their team of product managers and technicians is available to assist you.

8. Колдонуучунун кеңештери

• Шайкештикти текшерүү: For JLR-specific functions, it is highly recommended to provide your vehicle's VIN number to ANCEL support to confirm compatibility before attempting complex operations.
• Программалык камсыздоону жаңыртып туруу: Regularly check for and install software updates from www.anceltech.com to ensure optimal performance and access to the latest features and vehicle models.
• От күйгүзүү: Always ensure the vehicle's ignition is in the 'ON' position (engine can be off) when performing diagnostic scans or reset functions.
• Кылдаттык менен окуу куралы: Familiarize yourself with the device's menu structure and functions by reading this manual completely before use.