ID-COOLING IS-50X V3 CPU Cooler User Manual

1. Киришүү

The ID-COOLING IS-50X V3 is a high-performance, low-profile CPU cooler designed for compact systems such as Mini-ITX and HTPC builds. It features a powerful cooling capacity of up to 150W TDP, ensuring efficient heat dissipation for a wide range of processors. The cooler incorporates five 6mm copper heatpipes with direct CPU contact for optimal thermal conductivity, paired with a quiet 120mm PWM fan for intelligent speed control.

Its universal mounting brackets provide broad compatibility with both Intel and AMD platforms, including the latest LGA1700 and AM5 sockets. The cooler's design prioritizes both performance and quiet operation, making it an excellent choice for users seeking effective cooling in space-constrained environments.

2. Өзгөчөлүктөрү

• Төмөн Проfile Дизайн: Specifically engineered to fit Mini-ITX/HTPC systems with limited vertical clearance.
• High Cooling Efficiency: Capable of dissipating up to 150W Thermal Design Power (TDP).
• Advanced Heatpipe Technology: Features five 6mm copper heatpipes with direct CPU contact for superior thermal transfer.
• Quiet PWM Fan: A 120mm fan with Pulse Width Modulation (PWM) function allows for dynamic speed adjustment (500-2000 RPM) to balance cooling performance and noise levels.
• Жалпы шайкештик: Includes mounting brackets for a wide range of Intel (LGA 1150, 1151, 1155, 1156, 1200, 1700) and AMD (AM4, AM5) sockets.
• Дирилдөө Dampбүтүрүү: Equipped with 8 rubber dampening pads on both sides of the fan to reduce noise.
• Memory and I/O Compatibility: Designed with fan bracket displacement to ensure good compatibility with memory modules (up to 44mm height) and I/O components (up to 47mm height).
• Electrophoretic Blackening: Features 51 elegant black fins, providing a large radiator area of up to 2150cm² for enhanced heat dissipation and a sleek aesthetic.

3. Техникалык шарттар

4. Пакеттин мазмуну

Бардык компоненттердин бар экенин текшерүү үчүн кутудан чыгарганда таңгактын мазмунун текшериңиз:

• ID-COOLING IS-50X V3 CPU Cooler Assembly (Heatsink and Fan)
• Universal Mounting Brackets for Intel LGA115X/1200/1700
• Universal Mounting Brackets for AMD AM4/AM5
• Термикалык паста
• Монтаждоо бурамалар жана аппаратура
• Колдонуучунун Колдонмосу (бул документ)

5. Орнотуу боюнча колдонмо

Follow these steps carefully to install your ID-COOLING IS-50X V3 CPU Cooler. Ensure your system is powered off and unplugged before beginning installation.

5.1. Эне платаңызды жана процессоруңузду даярдаңыз

1. Remove your motherboard from the PC case if necessary for easier access.
2. Эски термикалык паста же калдыктарды кетирүү үчүн процессордун бетин изопропил спирти менен кылдат тазалаңыз.
3. Apply a small amount of thermal paste (pea-sized dot or thin line) to the center of the CPU's Integrated Heat Spreader (IHS).

5.2. Монтаждык кашааларды орнотуңуз

The IS-50X V3 uses universal mounting brackets. Select the appropriate brackets for your CPU socket type (Intel LGA or AMD AM).

• For Intel LGA115X/1200/1700: Attach the Intel mounting clips to the cooler base. Ensure the correct holes are aligned for your specific socket.
• AMD AM4/AM5 үчүн: Attach the AMD mounting clips to the cooler base.

5.3. Attach the Cooler to the Motherboard

1. Carefully align the cooler with the mounting holes on the motherboard.
2. Gently place the cooler onto the CPU, ensuring the thermal paste spreads evenly.
3. Secure the cooler using the provided screws. Tighten screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.

5.4. Connect the Fan

1. Locate the 4-pin PWM fan connector on your motherboard (usually labeled 'CPU_FAN' or similar).
2. Connect the cooler's 4-pin fan cable to this header.

5.5. Check for Clearance

Due to its low-profile design, the IS-50X V3 is optimized for compatibility. However, always verify clearance with RAM modules and motherboard I/O components, especially in compact cases.

6. Иштөө нускамалары

The ID-COOLING IS-50X V3 CPU Cooler operates automatically once installed and connected to the CPU_FAN header on your motherboard.

• PWM функциясы: The 4-pin PWM fan will automatically adjust its speed (between 500-2000 RPM) based on the CPU temperature, as controlled by your motherboard's BIOS/UEFI settings. This ensures optimal cooling performance while minimizing noise during lighter loads.
• BIOS/UEFI Орнотуулары: You can typically fine-tune fan curves and monitoring settings in your motherboard's BIOS/UEFI. Refer to your motherboard manual for specific instructions.

7. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин CPU муздаткычыңыздын оптималдуу иштешин жана узак иштөөсүн камсыз кылууга жардам берет.

• Чаңды тазалоо: Periodically (every 3-6 months, depending on environment) use compressed air to blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent them from spinning too fast during cleaning, which can damage the bearing.
• Термикалык паста: The thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures, consider reapplying fresh thermal paste. This requires carefully removing the cooler, cleaning off old paste from both the CPU and cooler base, and applying new paste.
• желдеткич текшерүү: Check the fan for any signs of wear, unusual noises, or obstructions. The hydraulic bearing is designed for long life (50,000 hours), but extreme dust or physical impact can affect it.

8. Кыйынчылыктарды

• Жогорку CPU температурасы:
  • Муздаткыч бекем орнотулганын жана CPU менен жакшы байланышта экенин текшериңиз.
  • Verify that thermal paste was applied correctly and is not dried out.
  • Check if the fan is spinning.
  • Компьютериңиздин корпусунда адекваттуу аба агымын камсыз кылыңыз.
• желдеткич айланбай жатат:
  • Confirm the 4-pin fan cable is securely connected to the motherboard's CPU_FAN header.
  • Check BIOS/UEFI settings to ensure the fan header is enabled and not set to a very low RPM profile that might prevent it from starting.
  • Test the fan on another fan header if available to rule out a faulty fan.
• Ашыкча желдеткич ызы-чуу:
  • Желдеткичтин калактарына тийген кабелдердин же тоскоолдуктардын бар-жогун текшериңиз.
  • Ensure the fan is clean and free of dust buildup.
  • Adjust fan speed curves in your motherboard's BIOS/UEFI to a quieter profile if temperatures allow.
  • Verify the fan is securely attached to the heatsink and the heatsink to the motherboard.

9. Колдонуучунун кеңештери

• Иштин шайкештиги: Always double-check your PC case's CPU cooler clearance before purchase and installation, especially for low-profile coolers like the IS-50X V3.
• Термикалык пастаны колдонуу: A small, pea-sized dot in the center of the CPU is often sufficient. The pressure from the cooler will spread it evenly. Avoid applying too much, as it can reduce efficiency.
• Кабелдик башкаруу: Желдеткичтин кабелин башка компоненттерге же аба агымына тоскоол болбошу үчүн тыкан жайгаштырыңыз.
• Температураны көзөмөлдөө: Use software utilities (e.g., HWMonitor, Core Temp) to monitor your CPU temperatures, especially after installation or during heavy loads, to ensure optimal cooling.

10. Кепилдик жана колдоо

ID-COOLING products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the official ID-COOLING webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.