1. Киришүү
The Artillery Sidewinder X4 Plus S1 is a high-speed FDM 3D printer designed for both beginners and experienced users. Featuring a large build volume, rapid print speeds, and advanced functionalities like Klipper firmware and auto-leveling, it offers a versatile and efficient 3D printing experience. This manual provides essential information for setting up, operating, and maintaining your printer.
2. Коопсуздук маалыматы
Жаракат алуунун же түзмөккө зыян келтирүүнүн алдын алуу үчүн принтерди иштетүүдөн мурун бардык коопсуздук көрсөтмөлөрүн окуп чыгып, түшүнүңүз.
- Принтерди ар дайым жакшы желдетилген жерде иштетиңиз.
- Иштеп жатканда балдарды жана үй жаныбарларын принтерден алыс кармаңыз.
- Do not touch the hotend or heated bed during or immediately after printing, as they can reach high temperatures.
- Электр булагы туура туташтырылганын жана жерге туташтырылганын текшериңиз.
- Do not leave the printer unattended for extended periods while operating.
- Use only recommended filaments and accessories.
- Шашылыш учурда, электр кубатын дароо өчүрүңүз.
3. Пакеттин мазмуну
Upon unpacking, please verify that all components are present and in good condition. The printer is 95% pre-assembled, requiring minimal setup.
- Artillery Sidewinder X4 Plus S1 3D Printer
- Power Cable (EU Plug Type)
- Filament Holder
- Куралдар топтому (мисалы, ачкычтар, бурагычтар, запастык форсункалар)
- USB кабели
- Колдонуучунун Колдонмосу (бул документ)
- Sample Filament (may vary)
4. Продукт бүтүп калдыview
The Sidewinder X4 Plus S1 features a robust design with key components engineered for high performance and stability.
- Klipper High-Speed Motherboard: Equipped with Klipper firmware and a 64-bit high-frequency processor for impressive speeds and acceleration.
- 4.3-inch Klipper Touchscreen: Intuitive interface for controlling print operations and settings.
- Dual-gear Direct Extruder: Ensures efficient and accurate material delivery.
- XY-Metal Linear Guide Rail: Provides highly accurate linear motion on X and Y axes for precise printing and stability.
- 300°C All-Metal Hotend: Supports a wide range of high-temperature filaments.
- 8,000 rpm Cooling System: Powerful fans for fast melting and cooling, crucial for high-speed printing.
- 121-Point Auto Leveling: Ensures precise bed leveling for optimal first layer adhesion.
- Чоң курулуш көлөмү: 300 x 300 x 400 mm for printing larger models.
- Байланыш: USB and Wi-Fi for flexible printing options.
5. Техникалык шарттар
Detailed technical specifications for the Artillery Sidewinder X4 Plus S1 3D Printer.
| Категория | Деталь |
|---|---|
| Генерал |
|
| Спецификация |
|
| Салмагы жана өлчөмү |
|
6. Орнотуу колдонмосу
6.1 Таңгактан чыгаруу жана баштапкы чогултуу
The Sidewinder X4 Plus S1 comes 95% pre-assembled. Follow these steps for final assembly:
- Принтерди жана бардык компоненттерди таңгактан этияттык менен алып чыгыңыз.
- Принтерди туруктуу, тегиз бетке коюңуз.
- Attach the gantry to the base if not already secured, following the instructions in the quick start guide (refer to included documentation for detailed steps).
- Mount the filament holder onto the designated position.
- Connect the touchscreen controller to the printer.
- Бардык кабелдер коопсуз туташтырылганын текшериңиз.
6.2 Power On and Connectivity
- Кубат кабелин принтерге, андан кийин жерге туташтырылган розеткага туташтырыңыз.
- Кубат өчүргүчтү ON абалына которуңуз.
- The 4.3-inch Klipper Touchscreen will power on.
- Wi-Fi туташуусу: Navigate to the 'Settings' menu on the touchscreen, select 'Network', and connect to your local Wi-Fi network. This enables remote printing and monitoring.
- USB туташуу: You can also connect the printer to a computer via a USB cable for direct control or file өткөрүп берүү.
6.3 Автоматтык түрдө төшөктү тегиздөө
The printer features a 121-point auto-leveling system for precise bed calibration.
- From the touchscreen, navigate to the 'Leveling' or 'Calibration' menu.
- Select 'Auto Leveling' and confirm.
- The printer will automatically probe 121 points on the print bed to create a mesh for compensation during printing.
- Ensure the print surface is clean before starting auto-leveling.
6.4 Filament Loading
The Sidewinder X4 Plus S1 uses a dual-gear direct extruder.
- Жип катушкасын жип кармагычка коюңуз.
- Preheat the hotend to the recommended temperature for your filament type (e.g., 200°C for PLA, 240°C for PETG, 260°C for ABS/Nylon).
- Insert the filament into the extruder's intake hole.
- Жипти экструдердин тиштүү дөңгөлөктөрүнө тийгенге чейин акырын түртүңүз.
- On the touchscreen, select 'Load Filament' or manually extrude a small amount to ensure it flows smoothly from the nozzle.
7. Иштөө нускамалары
7.1 Preparing Your Model (Slicing)
Before printing, your 3D model (STL, OBJ, etc.) needs to be converted into G-code using a slicing software (e.g., Cura, PrusaSlicer, Simplify3D). This software allows you to configure print settings such as layer height, infill, print speed, and supports.
- Install your preferred slicing software on your computer.
- Add the Artillery Sidewinder X4 Plus S1 as a custom printer profile, or use a compatible profile.
- Import your 3D model.
- Adjust print settings according to your filament type and desired print quality.
- G-кодун түзүү үчүн моделди кесип алыңыз file.
7.2 Transferring Print Files
You can transfer G-code files to your printer via USB or Wi-Fi.
- USB: G-кодду сактаңыз file to a USB drive and insert it into the printer's USB port.
- Wi-Fi (Remote Printing): With the printer connected to Wi-Fi, you can use a web interface (typically accessible via the printer's IP address in a web browser) to upload G-code files and initiate prints remotely.
7.3 Басып чыгарууну баштоо
- On the touchscreen, navigate to the 'Print' menu.
- Каалаган G-кодуңузду тандаңыз file from the list (USB or internal storage).
- Review the slice preview бар болсо.
- Confirm the print settings and press 'Start Printing'.
- The printer will begin preheating the hotend and print bed, then start the print.
7.4 Supported Filaments
The 300°C high-temperature nozzle and direct extruder allow for printing with a wide variety of materials:
- PLA (полилактикалык кислота)
- TPU (термопластикалык полиуретан)
- PETG (Polyethylene Terephthalate Glycol)
- ABS (акрилонитрил бутадиен стирол)
- Нейлон
- And other high-temperature filaments.
8. Техникалык тейлөө
Үзгүлтүксүз тейлөө 3D принтериңиздин оптималдуу иштешин жана узак иштөөсүн камсыздайт.
8.1 Соплолорду тазалоо
The printer features an automatic cleaning nozzle function. Additionally, manual cleaning may be required.
- Автоматтык тазалоо: Refer to the touchscreen menu for initiating the automatic nozzle cleaning sequence.
- Кол менен тазалоо: If clogs occur, preheat the hotend, then use a thin needle or cleaning filament to clear the nozzle. Be careful not to damage the nozzle.
8.2 Linear Rail Maintenance
The XY-Metal Linear Guide Rails require occasional lubrication to maintain smooth movement and precision.
- Periodically inspect the linear rails for dust or debris. Clean with a lint-free cloth.
- Apply a small amount of lithium-based grease or specialized linear rail lubricant to the rails every few months, or as needed based on usage.
8.3 Жалпы тазалоо
- Keep the print bed clean. Wipe it with isopropyl alcohol before each print for better adhesion.
- Regularly clean dust and filament debris from the printer's frame, motors, and fans using a soft brush or compressed air.
- Ensure the cooling fans (including the 8,000 rpm efficient cooling fans) are free from obstructions.
9. Кыйынчылыктарды
This section addresses common issues you might encounter during 3D printing.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жипче экструзияланбайт | Clogged nozzle, tangled filament, incorrect temperature, extruder gears not gripping. | Clear nozzle, check filament path, verify hotend temperature, ensure extruder tension is correct. |
| Биринчи катмардын начар адгезиясы | Bed not level, dirty print surface, incorrect bed temperature, nozzle too far from bed. | Run auto-leveling, clean print surface with isopropyl alcohol, adjust bed temperature, calibrate Z-offset. |
| Басмалар төшөктөн ажырап жатат | Similar to poor adhesion, warping due to cooling. | Ensure good first layer, use brim/raft, consider enclosure for ABS, reduce cooling for first layers. |
| Катмардын жылышы | Loose belts, motor skipping steps, excessive print speed, obstruction. | Check and tighten belts, reduce print speed, ensure smooth movement of axes. |
| Жип менен сайып/сууруп чыгаруу | Incorrect retraction settings, too high hotend temperature. | Adjust retraction distance and speed in slicer, slightly lower hotend temperature. |
10. Колдонуучунун кеңештери
Enhance your printing experience with these helpful tips:
- Filament Choice: The Sidewinder X4 Plus S1 supports a wide range of filaments. For beginners, PLA is generally easiest to work with. Experiment with PETG for stronger, more durable prints, or ABS/Nylon for high-temperature applications once comfortable with basic settings.
- Klipper микропрограммасы: Leverage the Klipper firmware for advanced control and customization. Explore its features for fine-tuning print quality and speed.
- Алыстан байкоо: Utilize the Wi-Fi connectivity for remote monitoring of your prints. This allows you to check progress and intervene if necessary, even when you're not physically near the printer.
- Кадимки калибрлөө: Even with auto-leveling, periodically check your Z-offset and perform a manual bed level check to ensure optimal first layer adhesion, especially after moving the printer or changing print surfaces.
- Аны таза кармаңыз: A clean printer is a happy printer. Regularly remove dust and filament scraps to prevent issues with moving parts and sensors.
11. Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please refer to the official Artillery webсайтына кириңиз же ыйгарым укуктуу дилериңизге кайрылыңыз. Кепилдик талаптары үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.
